Self Edit
Busy life! Office and parenting.Thats it.
Sent from my iPhone using PW Forums
Get your car raised from back side will do the trick. Yes it will cost around 2500 Pkr
Nope, car should be raised equally from all sides. Otherwise the shape will not be same. Further, the headlights range will be affected.
How much will it affected.? The head lights range
How much height should be increased equally on all four sides? 1 inch or 2 inches?
Brother I have Toyota passo I faced the same problem But now I don't have this problem anymore because I keep the tyres pressure to 35 psi. It improves the fuel economy too. But I drive very carefully on rough road.Tyre pressure 35 psi also written in owner manual and the driver door also. Use Yokohama eco tyres. Don't use alloy rims.
I have installed spacers on both rear springs. Although they were of 1 inch only the car height has increased by 2 inches from back. Hoping not hit anything again. P. S. When driving singly or only 2 persons sitting at front the headlights seem be to be downwards even at 0 mark. But when anyone sits at rear seat, it is normal again.
I changed the rare springs with 1 inch high ones. Problem almost solved
Passo recommended tyre sizes are 155 80 r13 and 165 70 r14
I have a question, if i put the tyre size of 175 70 r14 then what will be the effect?
Fuel consumption will increase
how much?
and will it cause suspension?
Don't how much consumption will increase but no affect on suspension
thanks
I have Toyota passoI m using Yokohama echo tyres 155/80/R13 from last 3 years with 35 psi pressure on all tyres. Always follow factory recommended specifications. Alhamdulillah I have 20km/liter average on motorway.On general or Chinese tyres peoples use 30 psi pressure but they are hard and will damage your suspension on damaged road that's why people in Pakistan use 30psi Tyre pressure. But fuel average and pick will be low.Don't use spacers and alloy rims.I often drive with passengers on smooth roads and damaged roads as well as I visit my village but with care.Speed breaker hitting problem solved.