aoa guys i have civic 8th gen 2010 model manual...i have noticed that when launching the car on 1st gear from zero car stalls a bit and then takes pick and while picking engine does great knocking...i usually launch car at 1.5krpmwent to honda they said u should launxh it at 2k or higher rpms and this model has this issues...i bought car zero meter and then it wwas fine..someone knows solution or faced similar issues?regards
In 2010 your clucth was new
In 2013 your clutch is worn:eek:
but i dont drive uphills nor i launch with burnouts...
+1
Sent from my Nexus S using Tapatalk 2
how much driven? and whats the situation of traffic at ur end? maybe cluth and pressure plate are gone a lil weak! it can also be a clogged fuel filter
@alee1
I bet you have the problem when the steering is in full cut position.???in that scenario more rpm is needed in order to get rid of juddering.
Guys,
Its not slipping clutch, its hesitation to accelerate;
You need to get the following done from Honda 3S;Throttle body, MAF Sensor & Spark Plug cleaning.
To start with try using fuel injector cleaner.
go and smack the honda service advisor who told you that.. They are proving that their product is bad.
Knocking .......Should Not Be There......
TRY HOBC ......You Might Be Running LOW RON Fuel Causing Knocks....!
And That Was One Foolish Reply By Honda Dealership.....Should Be Smacked Badly On That With All You Anger You Can Have At A Time..
Car Should Be Launched At 2k RPM....My ***....
well smacking him is a good idea...but wont solve the knocking issue. the problem is not fuel i guess cuz i have tried driving in regular petrol, hi octane and natural gas and the problem persists...
my charade could spin its wheels at an above 2k rpm launch... i wonder what a 1.8civic could do.. get the knock sensor checked as well..