Discussion is about missing problem at high rpm and i want to fix it myself.
Today i tested a local bike "Ghani". It was missing at high rpm and idling was also very poor.
First i tuned it to rich mixture and it started missing even at low rpms. Then i leaned the mixture and idling became smooth.
As soon as i gave it full throttle, bike stalled at 60kmph and turned off. I started it by using "choke" and came back home.
My assumption:-
1) Air jet is not working. Because at lean mixture i tried to set idle speed but rpm didnt went up/down.
2) Float position is low and bike starves at full throttle.
Advance apologies if i wrote something silly/wrong because i am not an expert:P