10th Generation Civic Owners/ FanClub Discussion Thread

[the129man]

Hi, I’ve noticed that when ever I choose a temperature and press “auto” on my climate control, it keeps sending air through the foot wells even after the car reaches the desired temperature. The only thing that changes is the fan speed. Is that normal? Why doesn’t it send air through the front vents?

[tiger4]

you mean one halogen and one led light. thanx brother it will figure out problem with led or pattern

[tiger4]

its mean car should parked at 30 feet from wall. it is assumed that low beam is adjusted such that 2 inch below from right side and one from the left. but question is that what should the height of beam on the wall from 30 feet and how the pattern loo like
@salik990 @arkhitekt

[arkhitekt]

The height should be same as when you park the car immediately with the wall.

In other words, first park your car with the wall, mark the centre points and then reverse straight 25 feet away. The lights should have same centre points at both distances

[umair_tayyab]

whatsapp group link ?

[harisamir90]

Salam guys, can anyone please let me know why my civic windscreen defogger isn't working like it should? It used to clean the fog and mist within seconds. I feel it isn't working now.

[biloo]

The following things commonly hurt window defoggers
Window tinting paper
Black sunshade touching glass
Cleaning internal glass with frequently with kapra

[harisamir90]

No paper on windscreen, and no sunshades either.

[biloo]

What about the third point??

[harisamir90]

That too was done by myself with a newspaper like a month back. Other than that no cleaning at all.

[biloo]

Newspaper? It might have damaged the grid lined. Kindly inspect whether there is some kind of breakage in your defogger lines and also, if you could check whether the current supply is ok or not?

[Khurramchauhdary]

Yes you got it right and for you 2nd question there are two methods one which is convenient as told by @arkhitekt and 2nd that you can manually measures tha distance between Center of two lights and height from ground to the centre of light, than mark those measurements with tape or chok on the wall and you are all ready for the rest of things.

[tiger4]

I tried to follow 2nd option but need guidance why two beam separate from each other.

What i need to do more

[tiger4]

I check height is 27 inches

[jklodhi]

Dear I would suggest that you take it to a good electrician or auto shop nearby and get it adjusted .

[ag3ntx]

Bro.. your LED tubes are producing light that is out of focus to your projector lens. No matter how much adjustment you do you wont get a perfect beam pattern. These chinese tubes are just a "jugaarr". If you want to enjoy LED headlights go for OEM LED headlights from malaysia or thailand.

[khuram2703]

@tiger4

Do not fiddle with the OEM adjustment..... only thing which you can attempt is mark the Top screw adjustment and with flips screw driver. rotate clockwise or counter clockwise 3 turns to check whether its going up wards or downwards which is usually needed after LEDs installation. Usually LEDs need 3 turns higher than halogen lamps.

Do not disturb left / right adjustment.

Furthermore there is a you tube video in which it is explained clearly that most of the people choose the Wrong LEDs.... Just go through it and as per @biloo Bilal bhai said, Go for the right one LEDs like the one I and @arkhitekt installed or the one @biloo bhai installed. Rest is Crap as i have extensively searched and found OEM Osram & OEM Philips to be the ones but they are a hell expensive keeping in view the upgrade.

You can put these in Fog lamps & go with the ones we have....

[usman1texh]

O ki Rola pay gaya jaye athay batiyan da sirrrrr

[harisamir90]

Thankyou brother. But its okay now

[biloo]

Yes. I agree . This is the main problem that is why i got Photum