AOA vaqas1.i invited PW people to give me suggestions regarding engine swap in my 94 corolla but ended up with no solution.i was told that your goodself swap 7afe in your corolla.so i want to know your experience about this engine.Durability and performance. How you find it. please share with me if you like.
Performance is average, mileage of the engine is good of what I'm told which I am not getting due to sensors issue. Engine is economical, bought it for 90k inc wiring and everything and even labour.
Sent from my iPhone using PW Forums
Bump.Same here. Have 1nzfe installed in my vitz 1999. Getting very poor mileage. Hardly around 8-9km/litre without AC. Everything is fine when connected to a scanner. I don't know where's the problem. That high fuel consumption is frustrating Any help/suggest would be highly appreciated
@usmanaliawan123
what happened to ur problem
the ecu has to be programmed, take it a fellow who understands these things. Once the ecu gets programmed, and the AFR gets set, only then can you attain the desired ,mileage. What gearbox has been mated with it?
Gearbox that was used in 2006-08 Corolla Altis.
Still same issue, Avg is down to 6Km/L on HOBC. Believe it or not.
What city are you in
Sent from my HTC One using PW Forums mobile app
Lahore
I know people in Islamabad that might fix the issue. But what you do need is to program the ecu
Get the o2 sensors checked, also have you connected the exhaust system from the same vehicle that you got the engine, because CATS can also effect mileage
Need someone who can fix the issue in Lahore.
Go to the fellow who did the swap and ask him to. If not, go to INH, I hear that they are quite advanced technologically
Who or what is INH?
http://www.inh.com.pkYou can find it on Google maps, get an opinion there and an estimated cost of repair
Thanks, I contacted them, will pay them a visit shortly.
Usmanaliawan kindly share details as i also have fuel average issue in mybse saloon 3zz fe auto
Sent from my LG-D851 using PW Forums mobile app
what do you mean by that ecu needs to be programmed? I heard that it automatically resets when you disconnect battery.
It needs to get all inputs inorder to work properly, his is a swap which was like 90 percent of the swaps in Pakistan, as long as the engine has turned, swap complete. Which isn't the case, everything has to be addressed from top to bottom
Can i get the details of person, who can look up to ecm and do some modifications to mate it to car. i put 1NZ-FE in Chevrolvet Oprta 2005 with CVT Gear Box.