8th generation Civic fan and owner club

[kylr.shah]

What's the year of manufacturing, mileage and registration city. 2006/2007 manuals are available even under 11

Lost email account on which my i.d ali.archilounge was based

bro its 80 thousand 2007 manufactured he is karnol he said he didn't want to sell under 11 because its company maintained.

[jazzxtreme]

As far as my vague memory serves me
Oil Honda - Rs.2450
Oil filter - Rs.900
Air filter- Rs.1850
Plugs - Rs.8000 (approx)
Add labour maybe 1000-1500
So you are looking at an approximate rough figure of Rs.13,000-15,000 plus or minus.

Lost email account on which my i.d ali.archilounge was based

Thanks bro.
Is it advisable to get all this done from Honda?

[arkhitekt]

Thanks bro.
Is it advisable to get all this done from Honda?

It's better to get it done from Honda, the difference in said items will be 20% higher at max but worth it to keep your car better in the longer run

Lost email account on which my i.d ali.archilounge was based

[silentassassin1]

Can anyone suggest me solution for the trim paper? As it gotvruined while removing airpress?

[arkhitekt]

bro its 80 thousand 2007 manufactured he is karnol he said he didn't want to sell under 11 because its company maintained.

Sounds reasonable. If a used car is good and properly maintained a few thousand here or there shouldn't matter once ure buying for self use and not buying as an investor.
If i were you and really liked a specific used car which clicks to the mind, I'd go for it even at a slightly higher price.

Lost email account on which my i.d ali.archilounge was based

[arkhitekt]

Can anyone suggest me solution for the trim paper? As it gotvruined while removing airpress?

Get a black 3M vinyl sheet pasted

Lost email account on which my i.d ali.archilounge was based

[silentassassin1]

Get a black 3M vinyl sheet pasted

Lost email account on which my i.d ali.archilounge was based

From where can i get it bro? And how much?

[ashbal]

Clutch in manual is bit hard but the manual reborn is just arocket...drive is also really good in prosmetic but manuals resale is very low
And if the blk one u r tlkng abt is manual and total genuine then its for arnd 1350 to 1375 at maximum

I thoght u said its 11 model so my post was acrdng to that

[arkhitekt]

From where can i get it bro? And how much?

3M vinyl sheets are available at any car market such as glass tints poshish etc. The plain black vinyl sheet is also used by number plate makers who cut out of it and make letters to paste (for those fake government style plates)
U need an adequate sized sheet from which you can cut out the complete size and shape. I think it was Rs.150 per square feet. You may probably need a sheet 3 feet long and 2 feet wide (6 sft) to get a seamless single piece without joint pasting. That single sheet may accommodate multiple doors. So according to that calculation its 6x150= 900 Rupees.
Or you can contact 3M wrapping as well. It's available in both matt finish and gloss in black color

Lost email account on which my i.d ali.archilounge was based

[arkhitekt]

3M vinyl sheets are available at any car market such as glass tints poshish etc. The plain black vinyl sheet is also used by number plate makers who cut out of it and make letters to paste (for those fake government style plates)
U need an adequate sized sheet from which you can cut out the complete size and shape. I think it was Rs.150 per square feet. You may probably need a sheet 3 feet long and 2 feet wide (6 sft) to get a seamless single piece without joint pasting. That single sheet may accommodate multiple doors. So according to that calculation its 6x150= 900 Rupees.
Or you can contact 3M wrapping as well. It's available in both matt finish and gloss in black color

Lost email account on which my i.d ali.archilounge was based

Better to get it done from the shop workers since it needs to be heated with a blower for stronger and bubble free pasting. Like the tinting guys cut out exact shapes of the window and do proper pasting work.

Lost email account on which my i.d ali.archilounge was based

[silentassassin1]

3M vinyl sheets are available at any car market such as glass tints poshish etc. The plain black vinyl sheet is also used by number plate makers who cut out of it and make letters to paste (for those fake government style plates)
U need an adequate sized sheet from which you can cut out the complete size and shape. I think it was Rs.150 per square feet. You may probably need a sheet 3 feet long and 2 feet wide (6 sft) to get a seamless single piece without joint pasting. That single sheet may accommodate multiple doors. So according to that calculation its 6x150= 900 Rupees.
Or you can contact 3M wrapping as well. It's available in both matt finish and gloss in black color

Lost email account on which my i.d ali.archilounge was based

Which color would be suitable? I want it to look like what is oem in cars.

[arkhitekt]

Oem on 8th Gen feels like it's slightly glossy

Lost email account on which my i.d ali.archilounge was based

[silentassassin1]

Oem on 8th Gen feels like it's slightly glossy

Lost email account on which my i.d ali.archilounge was based

Can you tell me source from where i can get the sheet and that too at good price. Btw how would i get it fit?

[arkhitekt]

Can you tell me source from where i can get the sheet and that too at good price. Btw how would i get it fit?

I can tell you about Lahore

Lost email account on which my i.d ali.archilounge was based

[ghayyour]

I want to sell my black oriel prosmetic 2012 with Nav + front & rear camera, cruise control, original michilen x2 energy saver tyres. completely maintained by Honda gateway and fort (complete record available). please suggest me the price.

Sent from my iPhone using Tapatalk

[arkhitekt]

I want to sell my black oriel prosmetic 2012 with Nav + front & rear camera, cruise control, original michilen x2 energy saver tyres. completely maintained by Honda gateway and fort (complete record available). please suggest me the price.

Sent from my iPhone using Tapatalk

My Uncle bought a 2012 Oriel Prosmatec Islamabad number original paint driven 28000 with 3S service and mileage record for 17 lacs

Lost email account on which my i.d ali.archilounge was based

[silentassassin1]

I can tell you about Lahore

Lost email account on which my i.d ali.archilounge was based

Im in gujranwala

[arkhitekt]

Im in gujranwala

Oops... No idea about there

Lost email account on which my i.d ali.archilounge was based

[silentassassin1]

Oops... No idea about there

Lost email account on which my i.d ali.archilounge was based

Can anyone fit those sheets?

[arkhitekt]

Can anyone fit those sheets?

Yes, there is a guy in Walton Road who does customized vinyl stickers and pastings. According to my knowledge he is ok for the job

Lost email account on which my i.d ali.archilounge was based