Ahmedshaikhani 4G13 Turbocharge

[aisheikh]

Some more recent updates on project. InshAllah my project will come to an end by Saturday with tuning and everything.

Something Finally started.


Taiwan FPR [Fuel Pressure Regulator]

Breather Filter

Oil Temp Gauge

Guess what is going on ?

Manifold and Turbo

Inter-cooler Placed

I like the manifold. You had it custom built? What was the cost?

[ahmedshaikhani]

yes bro.....u r right...i just love the BOV sound...sooner will get to them

Anytime brother feel free to contact.

[ahmedshaikhani]

ahmed a 20v would b faster then ur lancer try racing a cl7 or cl9 or N/A 1.8 civics or altis and maybe an rx8 as well

Tried with CL-7 ate with a healthy gap. Ate 1.8 Civic 8th generation also known as reborn. No match with Rx-8 dude I am not that fast.

[ahmedshaikhani]

CL-7 :)...
Ahmed's 4g13 Is Much Faster Than That....!!

Ustaad knows very well. InshAllah with changes try again and do tell me the result.

[mehrozniazi1]

Tried with CL-7 ate with a healthy gap. Ate 1.8 Civic 8th generation also known as reborn. No match with Rx-8 dude I am not that fast.

cl-7 with manual or auto

[burningwheels]

@ahmed
U could have easily stayed head to head with an auto rx8 and with the new setup you can easily smoke a manual 6 speed type s rx8.

[mtx]

rx8 ain't that slow..

[lowresolution]

@Roz
A few handy dandy tips
1-)CT9 will be wayy to small ..! no use in going that !
2-)If i plan to run FI only then swap the g13b head. ..you cannot take out n/a performance with the g13/g15 combo ..that only works for g13/g16

Now for some other stuff ...zubair ( swift turbo ) is running all stock internals on just 8 psi ..!!

@Ahmed
A friend of with a g15 gtti wanted to race with you ..but you denied , i also heared that sherry`s g16 gave you quite a bit of gap !! ! and how about racing a STOCK 4efte ..i can opt for a race...

[addzub]

@Roz
A few handy dandy tips
1-)CT9 will be wayy to small ..! no use in going that !
2-)If i plan to run FI only then swap the g13b head. ..you cannot take out n/a performance with the g13/g15 combo ..that only works for g13/g16

G13/G15 combo will help you only when you use Honda Piston because with stock piston you will get <= 8 compression which will kill your NA performance

Now for some other stuff ...zubair ( swift turbo ) is running all stock internals on just 8 psi ..!!

@Ahmed
A friend of with a g15 gtti wanted to race with you ..but you denied , i also heared that sherry`s g16 gave you quite a bit of gap !! ! and how about racing a STOCK 4efte ..i can opt for a race...

G13/G15 combo will help you only when you use Honda Piston because with stock piston you will get <= 8 compression which will kill your NA performance

[lowresolution]

@addzub
Remember toyota > suzuki

[addzub]

@addzub
Remember toyota > suzuki

Care to see this

YouTube - Suzuki Swift GTi Turbo vs. Mitsubishi Lancer Evo VIII Drag

(H)(H)(H)(H)(H)(H)(H)(H)(H)(H)(H)(H)(H)(H)(H)(H)(H)(H)(H)(H)(H)

[ahmedshaikhani]

@Ahmed
A friend of with a g15 gtti wanted to race with you ..but you denied , i also heared that sherry`s g16 gave you quite a bit of gap !! ! and how about racing a STOCK 4efte ..i can opt for a race...

Sir ji my car wasn't tuned at that time was already doing 5psi with detonation when raced with G16. Don't about that Gtti g15 I think someone asked my friend to race but he denied he was driving my car. InshAllah will race and try also.

[ahmedshaikhani]

@ahmed
U could have easily stayed head to head with an auto rx8 and with the new setup you can easily smoke a manual 6 speed type s rx8.

I don't think so that's not easy Rx-8 ain't that slow.

[ahmedshaikhani]

cl-7 with manual or auto

CL-7 Auto Trip tonic transmission.

[mehrozniazi1]

CL-7 Auto Trip tonic transmission.

thats good ...my race was cl9 with auto and was very good..even after cl9 intake+fuelpump+piping etc..still no match to my car

[mehrozniazi1]

@Roz
A few handy dandy tips
1-)CT9 will be wayy to small ..! no use in going that !
2-)If i plan to run FI only then swap the g13b head. ..you cannot take out n/a performance with the g13/g15 combo ..that only works for g13/g16

Now for some other stuff ...zubair ( swift turbo ) is running all stock internals on just 8 psi ..!!

@Ahmed
A friend of with a g15 gtti wanted to race with you ..but you denied , i also heared that sherry`s g16 gave you quite a bit of gap !! ! and how about racing a STOCK 4efte ..i can opt for a race...

thz alot for the tips

[mehrozniazi1]

G13/G15 combo will help you only when you use Honda Piston because with stock piston you will get <= 8 compression which will kill your NA performance

thz bro...as my car is daily runner under my hand only so i didt went for turbo engine in start...currently no CNG ...off from car....will for sure go to something turbo....wana make the fastest Mk1:P

[lowresolution]

@roz
youll have to work pretty hard to get the fastest mk1 title :) ...adzub is pushing close to 250 Hp in his Mk1 :) and hell be pushing it alot more...

[wasay_ahmed]

u can experiment but something bigger then ct9 will be laggy n i dont think so u will get better response coz i was running 1 bigger then t25 n mine was not as much responsive

[ahmedshaikhani]

u can experiment but something bigger then ct9 will be laggy n i dont think so u will get better response coz i was running 1 bigger then t25 n mine was not as much responsive

Its Nissan Dual ball bearing. Ball bearing spools quickly.