Any car audio problem, I can help. (Part 2)

[enerlevel]

Is it ok if i add coaxial speaker instead of components in front door ?

Sent from my iPhone using PW Forums mobile app

You can put anything brav.
Difference is that tweeters should be ear level to give you the best quality and soundstage. But if budget is a problem , or you like the sound coming from the rear like most people do, then just put 6.5 coaxial upfront.

[iuhaq]

Hi! AOA!

I am looking for options to install in-dash DVD Navigation (2-DIN) in my Nissan Sunny 2009 Model. However, for installation it needs to be modified. i am attaching a picture of the dash. Can you help me giving options for modifications to install 2-DIN?:S

[vickybhai]

I have a pioneer cassette player with 12 cd changer and kenwood speakers...some months earlier it was working all fine with no noise but now it is giving very bad reception...i checked and found out that my amp is stolen

How do i hook up the another amp and how to wire speakers to it???

[Ahmed7704]

bro i own a cultus 2008 only one speaker works i tried to connect speaker to front left nd rear left but it didnt work it only works on rear right sside any help.....

[chshahid2k]

Salam i am having a Alpine Pre which used to come in new Honda City, its MP3/WMA/Audio CD/Usb/FM player. as its from Honda and in honda the radio antenna is bit different from the one come in Suzuki or Toyota(not the round one but the jack type), so i make a jugar from outside of the unit(without opening it) but the radio was not scanning and there was alot of distortion even in those stations which are crystal clear on mobile and even on a china wali altered pre.

I explored the markets and able to find a jack for this pre, it was original of Honda City, i patched up with a female radio jack, which one usually find behind a stereo pre(image attached)

now the problem is, its still not working with my car radio antenna, i mean its not stop when i use the option of auto turning,, and even on manual tuning the sound is very noisy and 'shaa shaa' all the time.

Before that i had an old stereo unit in which i installed a USB MP3/SD Card module altered in MD unit and i even get a lot clear FM signals on that module.

Kindly suggest me a permanent solution of this.

[penta567]

Yesterday, after coming from office I opened the bonnet and saw a bit of dust on battery terminals. I unscrewed the terminals and cleaned them with water and etc. After connecting them firmly to the battery i started the engine and finding every OK (without noticing the CD changer ) i switched it off and locked the car.

Today, in the morning when i started the car (as usual) and noticed that my CD changer which was completely fine before cleaning the terminals when i returned from office yesterday in not working. The only options i m getting at the Player are either "OFF, TAPE or AM (Radio)", the "CD" option is not being displayed. I request you guys to help me please.

[topcat]

Is this Amp worth fixing ?
Its not working and came with the car . Just want to find out if its even worth fixiing . on the back thee is sticker "Made in Korea" and the logo is like a globle and DCTC i think .

AMP

[topcat]

Deleted

[topcat]

Deleted

[MiniAkcent10]

I have a pioneer d4 subwoofer with rockmars amp..i got a problem with it,when i attach the wire of 2nd coil the amp trips..some electrician says that the problem is with subwoofer n som says that the problem is with amp
im confused what should i do now??
jus buy a new amp or subwoofer?

[madhouse12]

I have a pioneer d4 subwoofer with rockmars amp..i got a problem with it,when i attach the wire of 2nd coil the amp trips..some electrician says that the problem is with subwoofer n som says that the problem is with amp
im confused what should i do now??
jus buy a new amp or subwoofer?

u r running the sub parallel on bridge mode? on parallel the final impedance will be 2 ohms and if you have a 2/4 channel amp and you are running it on bridge, the amp might not be stable at 2 ohms bridge. get a d2 and run it in series if u want to run it on a 2/4 channel

[MiniAkcent10]

u r running the sub parallel on bridge mode? on parallel the final impedance will be 2 ohms and if you have a 2/4 channel amp and you are running it on bridge, the amp might not be stable at 2 ohms bridge. get a d2 and run it in series if u want to run it on a 2/4 channel

its a 4 channel amp
the electrician said, 'apke woofer ki aik coil sar gai hai'

[devils_smile]

its a 4 channel amp
the electrician said, 'apke woofer ki aik coil sar gai hai'

i woudnt jump to that conclusion. Get a DMM and use it to measure the resistance at the amplifiers end of the subwoofer wire connection. If you are getting 0 resistance, only then is your sub blown.

try connecting you sub like this.

else get a Dual 2ohm or Single 4ohm sub and connect it on bridged mode.

[omarss]

u r running the sub parallel on bridge mode? on parallel the final impedance will be 2 ohms and if you have a 2/4 channel amp and you are running it on bridge, the amp might not be stable at 2 ohms bridge. get a d2 and run it in series if u want to run it on a 2/4 channel

He can keep the D4 if the DVC are wired up in series to go to 8 ohms. In parallel (2 ohms), the rockmars might not be 2 ohm stable, even if is a mono or multi channel (bridge mode). Loss of power, yes but is good if not willing to change amp. 8 ohms VC setup should work without any tripping.

Manual for D4 (http://www.pioneerelectronics.com/StaticFiles/Manuals/Pioneer%20TS-W3002%202502%20instruction%20manual.pdf)

[MiniAkcent10]

i woudnt jump to that conclusion. Get a DMM and use it to measure the resistance at the amplifiers end of the subwoofer wire connection. If you are getting 0 resistance, only then is your sub blown.

try connecting you sub like this.

else get a Dual 2ohm or Single 4ohm sub and connect it on bridged mode.

It worked,the amp didn't trip this time

[websiterdesigner]

Assalam-o-Alaikum to All Readers.
My Car Player remote setting changed.So of buttons are not working.I change its cell but not working properly.
Other Car MP3 remotes are not working also.
Can anyone tell me what do i do?
Can I reset remote settings.
Remote Image is attached.

[devils_smile]

It worked,the amp didn't trip this time

that's good to know.... that electrician must have been high to suggest the coils were blown without even checking them.

[MiniAkcent10]

that's good to know.... that electrician must have been high to suggest the coils were blown without even checking them.

So should i buy a new amp or what?

[devils_smile]

So should i buy a new amp or what?

nope... ur ok with both the amp and sub for the moment.... the sub should be working fine with the way its wired at the moment.

[kamilibral]

Dear fellows one of my friends dvd player (dellson reborn indash navigation player XDB 2800) has software issue.it keeps loading
When we turnon the player. one of mechanic said it has software issue. Any suggestions what to do or from where it can be repaired in Isb/Rwp. Waiting for reply

Sent from my A700 using PW Forums mobile app