Audiophile SQ Setup: Corolla Build Log

[devils_smile]

Power/Ground Wire

AudioSystem Z-PC35R/B 2-Gauge OFC Wire (Made in Germany)

Introducing the main Power/Ground wire which will run from the Battery all the way to the distribution block in the trunk. The AudioSystem Z series 35mm2 (2 Gauge) Hypertwist 100% Oxygen Free Copper High Performance cable. A total of 8 meters of cable will make its way to the car ( 6 meter red power cable / 2 meter black ground cable ). I could have opted for a 1/0 gauge run just like I did with the NVX Big3 wire but calculating the power needs for the amplifiers and the total length of cable needed, the 2 Gauge cable is more than sufficient for this build

[devils_smile]

Distribution Block / Inline Fuse Holders / Battery Terminals

Now that we have the wiring sorted out, lets talk about the accessories linked to these.

Battery Terminals:

T-Spec VBTPN 1/0-10 Awg +ve/-ve Terminals

(4) 4/8/10 AWG outputs (set screw)
(4) 1/0-10 AWG outputs (ring terminal)
For positive or negative battery post use (adapter sleeve included)
Includes (1) positive and (1) negative bolt-on post for retaining factory vehicle terminal
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology

https://www.tspeconline.com/product/VBTPN

Distribution Blocks:

Stinger SHD821 Fused Distribution Block

• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
• Allen screws for fuses

Connection BDB51 Ground Distribution Block

• One 1/0 Gauge or 4 Gauge Input
• Four 2/4/8 Gauge Outputs
• POLYCARBONATE casing, strong and scratch resistant.
• SMBTM (Solid Machined Brass) construction for improved current transfer.
• PLATINUM SATIN finish for enhanced cosmetics.
• KNURLED SCREWS for low-loss contact with the cable strands.
• RECESSED inset cable collar for protection against “stray” wire strands.

Inline Fuse Holders:

Connection BFH 11

• POLYCARBONATE CRYSTALS casing, strong and scratch resistant.
• 4 AWG thru 1/0 AWG inputs for any current demand.
• SMBTM (Solid Machined Brass) construction for improved current transfer.
• PLATINUM SATIN finish for enhanced cosmetics.
• KNURLED SCREWS for low-loss contact with the cable strands.
• RECESSED inset cable collar for protection against “stray” wire strands.
• AFS FUSE 15A to 300 A available.

Gladen FH20

Gladen FH20 – 4AWG Mini-ANL (AFC/AFS) Fuse Holder
Accepts 8AWG with removable inner collet for upto 4AWG (20mm^2)
Waterproof with nickle plated fittings
Smoked plexi housing
150A Max rating
For AFC/AFS Fuses

[devils_smile]

Interconnects

Source => DSP

2 x Focal ER5 OFC Triple Shielded 5m RCA

My favorite RCA's to sum it up. Been using these in the Nissan and they were sublime. Not only that, these look good too when you pop the trunk and see them.

DSP => Amplifiers

3 x Stinger SI623 6000 Series 1 meter RCA

The plan was to use some different rca's but those are on hold for a while now so in the mean time, got these Stinger 6k 1m RCA's which are great in terms of sound, looks and don't break the bank

[devils_smile]

I said it before and I'll say it again, great things come in red boxes

[devils_smile]

Front Stage

Helix Precision P62C

Had been on the Lookout for these back in Germany. Imagine my luck I got to talk to @yawar538 on a different topic and somehow I ended up with these in my hands

https://www.audiotec-fischer.de/en/helix/speakers/p-62c

[devils_smile]

Sub Stage

Helix Precision P12

Helix's idea of the perfect referance grade subwoofer. Made in Germany with hand picked components, the P12 will create detailed low-end that perfectly complement a high performance speaker system.

[Djaymx]

Cool build as always

[devils_smile]

Specifications

Size: 12 -inch
Impedance: 4 Ohm SVC
Voice Coil. 3" Oversized
Cone Material: Silk Coated Agave Sisalana
Surround Material: Rubber
Ideal Sealed Box Volume (cubic feet): 0.75
Sensitivity: 87.3 dB at 1 watt @ 1 meter
Max RMS Power Handling: 350
Peak Power Handling (Watts): 700
Top Mount Depth (inches): 5 9/16
Weight: ~10Kg

[devils_smile]

Appreciated

[devils_smile]

Total Number Of Sound Deadening Sheets Used:

**32 x Sound Deandening Sheets ( Infinity / Caliber )

Total Number Of Closed Cell Foam Sheets Used:

10 (100x50x2.5 cm) CCF Sheets
9 (50x30x2.0 cm) CCF Sheets Bulk Pack

[devils_smile]

Amplification

Helix Precision H400X

The best of both worlds – extremely fast MOSFET driver circuits in Class A operation combined with enormously load-stable, power-potent “afterburners” in bipolar technology. This is the recipe for success for the particularly flat amplifiers, which, thanks to their sophisticated processor control, don’t get their feathers ruffled in any situation

The H400x, the P62c and S62c-v2 crossovers with the plexiglass removed. This is sheer GERMAN ART

[devils_smile]

Processor

Mosconi Gladen 4to6 DSP

It's simple math. A 2 way front component setup + sub stage and you are good to go with a 6 channel output dsp. That being said, I'm still waiting for a few other goodies which includes another dsp. In the mean time, this little badass Italian processor will work just fine

[devils_smile]

Accessories

Tesa 51617 PET Fleece Tape

A PET fleece tape with a solvent-free rubber adhesive, mainly used for wire harness covering in the passenger compartment. It combines important features such as noise damping and abrasion resistance while keeping harnesses flexible and is tear and aging resistant

The product will be used on all speaker and RCA cinch cables to protect and isolate them

AlexTech Expandable Braided Sleeving

Expandable PET braided wiring sleeve made specifically to protect and prolong the life of automotive wiring. The sleeving can expand by upto 50% its original size and is suitable for use between -75*C all the way upto 125*C with a melting point of ~230*C

Both the 1/2" and 3/4" sleeving will be used to protect the 0,2 and 4 AWG wiring that will be used in this setup

Audison Connection SRT 2 Terminal

REFERENCE ring terminal
2 AWG input size
SMBTM solid machined brass construction for better current transfer
RECESSED inset cable collar for protection against “stray” wire strands
TRANSLUCENT connector boot with Connection monogram included
PLATINUM SATIN finish

StreetWires PowerRings PRS0 Terminal

1/0 Gauge Set Screw Power Ring
Two step termination
Precision machined from billet high conductivity brass
Heavy duty steel socket set screws
Nickel Plated
Polarity Indicators (Red/Black)

[pwuser164818480359]

Very nice and detailed thread, I have a quest about these two items mentioned in your thread.

AlexTech Expandable Braided Sleeving
Tesa 51617 PET Fleece Tape

Can we find these in Pakistan especially in lahore??

[devils_smile]

I'm not sure if you can find the same brands but aliexpress has the same type of fleece tape and braided sleeving from other brands. Most of these are made in china anyways and you can simply just order them from there. Regarding availability in Pakistan or Lahore, I'm not too sure. You'd have to really look around but I doubt anyone stocks these. It's the same old electrical tape being used by everyone

[devils_smile]

Getting the A-pillars ready. There were a few small imperfections so had to get these sorted out before the a pillars are reupholstered

Also had the A pillars lined with deadener + CCF to minimise unwanted noise which could interfere with the output from the Helix P1 tweeters

[Djaymx]

Kamal execution, very few can pull off builds that meet expectations.

[devils_smile]

Capacitor

Helix Precision DPC1000 capacitor

Introducing the Helix DPC 1000 Smart Cap with built in Voltage Display, extremly low internal resistance (1 mΩ), Auto start / soft start function, gold plated terminal screws and overvoltage protection

[devils_smile]

Running some temporarily 4 gauge Tsunami OFC Wire for the BIG3 until the 0 gauge arrives. Familiarising myself with installing the wires with the braiding + heatshring.

To achieve a great chemical bond, I also melted some solder into the crimp itself with the copper strands

[devils_smile]

Some of the gear just landed from the US