B13 Play Around Continues

[ahmed2396]

very rare item.... don't know the price, regular ones are available though. A good dash is available in 15k.

Brown ones are available for 28K for 4 door cards with power windows complete and brown dashboard.

[star2]

Brown ones are available for 28K for 4 door cards with power windows complete and brown dashboard.

If i were at you place i would not get the power windows and door cards for that much, i would go for complete doors and pay 5-6k more. Get your car assessed through denter. Your old doors may not be so good. So change the whole package, will cost you less and beneficial in long-run.

[star2]

@ahmedraja1996

and don't just go for dashboard just. Get its wiring as well.

[ahmed2396]

If i were at you place i would not get the power windows and door cards for that much, i would go for complete doors and pay 5-6k more. Get your car assessed through denter. Your old doors may not be so good. So change the whole package, will cost you less and beneficial in long-run.

Mine has maroon coloured interior, dashboard and seats. Dashboard and doorcards are not in good condition. So you advise to get complete doors? I am searching ones in black interior, doors should have black door cards and black dashboards but usually brown ones are available. For how much can one get 4 doors of b13 super saloon in good nick? black ones are rare.

[ahmed2396]

@ahmedraja1996

and don't just go for dashboard just. Get its wiring as well.

complete dashboard which has 220 km/h speedometer and wirings are for 15-18k. grey or brown coloured are available.

[star2]

Mine has maroon coloured interior, dashboard and seats. Dashboard and doorcards are not in good condition. So you advise to get complete doors? I am searching ones in black interior, doors should have black door cards and black dashboards but usually brown ones are available. For how much can one get 4 doors of b13 super saloon in good nick? black ones are rare.

complete dashboard which has 220 km/h speedometer and wirings are for 15-18k. grey or brown coloured are available.

Yes, you can get complete doors for around 32, 33 somewhere which are in good nick along with door brackets. That way, you can overhaul the look of your car as well as door components like mirrors and rubbers, channels and weather strip, etc. which I am sure will not be in good condition. So your best bet is to change the complete doors first, chose 1 color, grey is more common, and overhaul the interior one by one.

[star2]

Today I had a visit to Bilal Gunj to my friend.

Saw a beautiful QG15 there. It was an auto.

Was very clean indeed.

[star2]

and purchased the following items..... if anybody needs it, can contact me.

Complete Dash Board Wiring Along with Engine Bay Wiring, not a single grip cut, not a single wire cut....

and it is the electronic controlled version of AC/Heater/Cooler/Fan and Temp Control.

The Heater Box

The cooling coil, in pristine condition

The meter came along with the wiring, condition is immaculate

Don't mind the RPM needle, it gets there sometimes, not an issue, will be back once given +12V

[FBB]

@star2 I wish that I too have B13 to enjoy it. By the way I saw the B13 original meter with 220km/hr speed. Why not you go for that?

Sent from my Z12 using Tapatalk

[star2]

@star2 I wish that I too have B13 to enjoy it. By the way I saw the B13 original meter with 220km/hr speed. Why not you go for that?

Sent from my Z12 using Tapatalk

There are different models and different variants in B13. I just go for the matching assembly.

[IsbCap]

Don't mind the RPM needle, it gets there sometimes, not an issue, will be back once given +12V

Hmmm. This one can't handle QG15 at it's peak (Went to 195 during my last MW journey, fortunately i have the 220 meter :P)

[star2]

Okay, washed the engine bay and it turned out to be a bad decision..... got A/F Sensor code

[star2]

So, finally I wired up my DLC3 connector and erased the code through G-Scan-2.

[star2]

and placed it properly with ECU

[FBB]

@star2 Buddy you too buy a bluetooth adapter for yourself, its working awesome.

Sent from my Z12 using Tapatalk

[ahmed2396]

star how is your qg going?

[ahmed2396]

PM me for cooling coil.

[star2]

star how is your qg going?

Alhamdolillah - healthy and beautiful

[star2]

Okay, the bad thing happened.... AC pipe got burst from the joint. It was already punched by a local shop and was not genuine, so........ here it goes...

Okay the shopkeeper had already cut the nozzle before I could take the picture.... so....

the silver part from which the nozzle got separated..... bad job i think.. though has worked for a year or so....

oil spillage everywhere due to exhaustion of gas and oil mixed....

[star2]

The pipe from the compressor detached and here is the piece from which the rubber pipe got broken...

Since the compressor is of QG18 and the original pipe which comes in B13 is of GA15 or E series, the fitting is different of both from the compressor end, so there was no way except to weld it..... hence...

The new steel cap is again pressed against the rubber pipe, lets see how much this one lasts....