Car Care and Detailing Dreams (Part 2)

[quddos]

Getting all the meguaris products very very soon. What you see in the picture will be a reality .. Every product coming

@ausi
hmm..good to know.
But what about the rates?..

they are very cheap there and costly here..

[highroller]

Did some minor paint correction today... took around 3 hours and yet was not able to complete the whole car
Anyhow sharing the results...

Wash & Dry
Step1: Wash with Meguiars UW&W with Megs Wash Mitt and 2 bucket method.
Step2: Clayed whole car with Megs Clay Kit except the roof
Step3: Step 1 (washed again) and dried with couple of Meg Water Magnets

Correction (only Drivers side)
Step 1: Wolfgang total swirl remover 3.0 on Meg burgundy cutting pad on PCXP with dial @ 5
Step 2: Removal with Megs Supreme Shine cloth
Step 3: Wolfgang Finishing Glaze 3.0 on Meg Polishing pad on PCXP with dial @ 4
Step 4: Wipedown with 10-12% IPA

LSP (bonnet and drivers side)
1 coat of Pinnacle signature series II on Meg Even coat applicator, let it haze for a min and removed it.

Miscellaneous
Pinnacle onyx dressing on Trim (50/50 shot attached)
Pinnacle onyx tyre dressing on on wheel (coz i was exhausted

Fog Fight testing on windscreen, review done, works well.

[Durrani_45]

Did some minor paint correction today... took around 3 hours and yet was not able to complete the whole car
Anyhow sharing the results...

Wash & Dry
Step1: Wash with Meguiars UW&W with Megs Wash Mitt and 2 bucket method.
Step2: Clayed whole car with Megs Clay Kit except the roof
Step3: Step 1 (washed again) and dried with couple of Meg Water Magnets

Correction (only Drivers side)
Step 1: Wolfgang total swirl remover 3.0 on Meg burgundy cutting pad on PCXP with dial @ 5
Step 2: Removal with Megs Supreme Shine cloth
Step 3: Wolfgang Finishing Glaze 3.0 on Meg Polishing pad on PCXP with dial @ 4
Step 4: Wipedown with 10-12% IPA

LSP (bonnet and drivers side)
1 coat of Pinnacle signature series II on Meg Even coat applicator, let it haze for a min and removed it.

Miscellaneous
Pinnacle onyx dressing on Trim (50/50 shot attached)
Pinnacle onyx tyre dressing on on wheel (coz i was exhausted

Fog Fight testing on windscreen, review done, works well.

Last 2 shots great bro ,secondly get a dslr other pics not doing justice and
What are u reveiws on wolfgang swirl remover to me its the best bit i wished they made a bottle a lil handy its really hard to take ot out from
Sent from my GT-I9100 using Tapatalk 2

[AusI]

@ausi
hmm..good to know.
But what about the rates?..

they are very cheap there and costly here..

Sir koshish poori hai kai they would suit everyone but shipping and duty aren't cheap... so might be a little expensive but quality products which are brand new

[highroller]

Last 2 shots great bro ,secondly get a dslr other pics not doing justice and
What are u reveiws on wolfgang swirl remover to me its the best bit i wished they made a bottle a lil handy its really hard to take ot out from
Sent from my GT-I9100 using Tapatalk 2

Last 2 shots r my fav too. Unfortunately iPhone cam doesn't do justice. As far as dslr is concerned, I bought D7000 as my graduation gift 2 years back, used it n sold it to a friend after few months coz I got bored with it.
Indeed WGTSR & WGFG 3.0 r great combo and with the right pad works for you well but I find tsr dust too much like m105 but obviously have less cut.
I've heard menzerna dust less than half than others, waiting to get my hands on it.
Yar it is very easy to get product out of it. I don't know y u having issues. Instead of shaking vertical, shake as if u twisting, it mixes well. N when u have to pour on a pad turn it upside down n give a jerk down without opening the lid. Then open the lid and squeeze the bottle and ull have a perfect uninterrupted flow!!

Sent from my iPhone using Tapatalk

[highroller]

Okay so here is the long await review of CarPro Fog Fight @accord7362
Although it aint useful in this season but definately has proven to be a real support for winters.
No more directing warm air or fresh air at windscreen to avoid fog or wiping windscreen with bare hands or tissues (yes have done it too, looks pathetic)

It is a very similar review with less bak bak from what CEEDOG did on AGO.
Comes with Fog Fight spray bottle, 1 large suede cloth, 2 small suede clothes and applicator support brick or whatever you call it

Prep work, clean with suede cloth and make a divider


Roll small suede cloth over the applicator brick and spray once, 1 push is more than enough for the section in question


After cure time of 30-45 min (since im a impatient soul, I put it to test after 20 min)
Placed boiling water in coffee mug and the rest you can see in pics belowe




Outside view after i removed the cup and thought i was done reviewing
can see the difference from outside and what you see on right is the carpro fog fight coating that is fighting and absorbing or kicking or whatever it is doing to avoid the fog. Moreover it vanished in under 2-3 seconds.

In short at least I am impressed with the results...

[accord7362]

okay so here is the long await review of carpro fog fight @accord7362
although it aint useful in this season but definately has proven to be a real support for winters.
No more directing warm air or fresh air at windscreen to avoid fog or wiping windscreen with bare hands or tissues (yes have done it too, looks pathetic)

it is a very similar review with less bak bak from what ceedog did on ago.
Comes with fog fight spray bottle, 1 large suede cloth, 2 small suede clothes and applicator support brick or whatever you call it

.

jazakallah bathreen review

[ahmad_yar]

Umar bhai @highroller efficent utlization of products but why only driver side door ? Don't u think now its givng variation in shine and reflection with rest of car ? Love the out comes of carpro fog fighting outcomes

[Durrani_45]

Look who is at the thread today aj tou gali mai chand nikal aya kashif bahi we need ur replies

[volverine]

@highroler
excellernt work bro
thumbs up
nice products

[highroller]

Umar bhai @highroller efficent utlization of products but why only driver side door ? Don't u think now its givng variation in shine and reflection with rest of car ? Love the out comes of carpro fog fighting outcomes

Ahmad bhai bas applying the precious tips u give out now and then.
Driver side door nhi complete driver side including bonnet. Or krne ki himmat nhi thi
****/reflection aap inspect krna na n then tell..

Sent from my iPhone using Tapatalk

[fazalwahab11375]

Peboys, Autozone, Advanced auto parts, and so many are close by.. These stuff are always on sale..

Ever tried pepboys? Heard their clearances are mind blowing...

[highroller]

@highroler
excellernt work bro
thumbs up
nice products

Thanks boy. Trying to mimic the outcomes u produce

Sent from my iPhone using Tapatalk

[awais.9]

car wash was due today but then i checked the forecast

[fazalwahab11375]

I think i can go for it?

car wash was due today but then i checked the forecast

[awais.9]

I think i can go for it?

when i checked forecast before it wasnt going to rain from monday till wedensday so thought to wash but now its raining,so enjoying rain n then will wash
u got perfect weather for detailing

[Marwanpasha]

Hello Guys and gurus i have a question to all exprienced and want you to correct me if i am worng today after a wash with the turtle wash and wax in the waxing section first i applied the mothers california (pic shared below) and then the armor all ultra shine. but i noticed one thing that last time i applied the armor all ultra shine coat first and then mothers wax and i was impressed that it was not attracting the dirt even after 4-5 hours and today the final coat was with the armor all ultra shine and it was dirty with in 3 hours. am i using the wrong sequence or the wrong polishes? pls guide me to the right path so i can acheive the gud shine. like the high rollers corollas bonnet having it only with this mothers california gold wax:P;)

[highroller]

Hello Guys and gurus i have a question to all exprienced and want you to correct me if i am worng today after a wash with the turtle wash and wax in the waxing section first i applied the mothers california (pic shared below) and then the armor all ultra shine. but i noticed one thing that last time i applied the armor all ultra shine coat first and then mothers wax and i was impressed that it was not attracting the dirt even after 4-5 hours and today the final coat was with the armor all ultra shine and it was dirty with in 3 hours. am i using the wrong sequence or the wrong polishes? pls guide me to the right path so i can acheive the gud shine. like the high rollers corollas bonnet having it only with this mothers california gold wax:P;)

Yar u have answered your question yourself.
Either switch to your old pattern or end with mothers reflections top coat or get gold class n apply two coats n ull get shine.
Even though it is only cleaner wax but carnauba k upr random wax might not give satisfactory results.
Carnauba carnauba hai, mothers o ya swissvax jaise degree degree hoti hai asli o ya fake

Sent from my iPhone using Tapatalk

[princelakhani]

on sell https://www.pakwheels.com/forums/body-lights-appearance-parts/213465-karcher-120-bar-k2-980m#post3841301
Karcher 120Bar washer pressure.

[fazalwahab11375]

[ATTACH]1174075[/ATTACH]

[ATTACH]1174076[/ATTACH]