Car Care and Detailing Dreams (Part 2)

[ahmad_yar]

its a 2005 civic..silver colour..never been rubbed off before..the swirls are too many as the car has always been cleaned with a 20 rupee wala kapra..i hav the rotary buff..wat i need to knw is should i use a cutting pad with some polish(wud like to knw the name)or a polishing pad with a compound...plz suggest m confused.

Ali bhai seems u need 3m fast cut compound with megs burgundy cutting pad than 3m ultrafina se polish with megs yellow polishing pad than any synthetic paste wax

[venmouskiller]

detailed my ride today after long time
appologies for bad quality pictures camera kahe rak k bhol gaya

[Marwanpasha]

detailed my ride today after long time
appologies for bad quality pictures camera kahe rak k bhol gaya

Edit:

Great work bro..!

Will you pls tell your car colour. I am little confused.

Sent from my iPhone using PW Forums mobile app
Yahoo i got the app at last...!

[venmouskiller]

Edit:

Great work bro..!

Will you pls tell your car colour. I am little confused.

Sent from my iPhone using PW Forums mobile app
Yahoo i got the app at last...!

strong blue metalic

sent from ashiq mezaj admi via kabooter

[ali454]

Ali bhai seems u need 3m fast cut compound with megs burgundy cutting pad than 3m ultrafina se polish with megs yellow polishing pad than any synthetic paste wax

bhai jaan thanku fr ur prompt response..kindly tell meg pads kahan se milaen gae in lahore..also 3m products??

[Marwanpasha]

strong blue metalic

sent from ashiq mezaj admi via kabooter

Ooh really..! Some pics now are showing it like little grayish. And in few pics of last time was looking like grey metallic. I think u should shot snaps in regular light with out flash. Or may be in day time for better result.

Waise humein reply bhi ussi kabooter ke haath (i mean mouth) he bhijwana hoga jo aapka pegham lata hai ya hum mail kar saktein hAin.

Sent from my iPhone using PW Forums mobile app
Yahoo i got the app at last...!

[tjkhattak]

Here are the pics

Nice JDM car bro and great unit :). As you have a used Axio I would suggest to clay it first so as to remove any bonded surface containment on the paint. So you have to follow the following procedure with the products IMHO:
Step1:Wash the car with Ultimate Wash & Wax and then dry the car.
Step2:Clay the paint using Meguiar's Smooth Surface Clay Kit.
Again repeat step 1.
Step3:As the paint seems in good condition so use a pure polish like "Megs Deep Crystal Polish".
Step4:In the end use "Megs Ultimate Liquid Wax" (included in the Smooth Surface Clay Kit).
You have to read the forum a lot to carryout all the above steps rightly, specially go through all the suggestions and recommendations of @vague_one and @ahmad_yar both being the gurus here. In the end I would like to add that these are suggestions as I understand and might not be accurate. So please do consider suggestions from hardened detailers here at PW.

[venmouskiller]

Ooh really..! Some pics now are showing it like little grayish. And in few pics of last time was looking like grey metallic. I think u should shot snaps in regular light with out flash. Or may be in day time for better result.

Waise humein reply bhi ussi kabooter ke haath (i mean mouth) he bhijwana hoga jo aapka pegham lata hai ya hum mail kar saktein hAin.

Sent from my iPhone using PW Forums mobile app
Yahoo i got the app at last...!

lol yaar app mail b ker saktay ho
khair yaar flash to sirf ajj he use kiya hai... pehlay wali sari pics to daytime ki hai sawai kuch pics k...

[highroller]

Hahahhahahahhahhahahhahhahahhahahahhahahahahha Ahmed bahi u made me laugh so loud

hans lo... mey lallchi hoya tey mera chota pra maha lalchii ?

[Durrani_45]

With respect to the thread and all fellows ,all detailing lovers should have gf or wife like this

[highroller]

With respect to the thread and all fellows ,all detailing lovers should have gf or wife like this

Wo apne doctor ki gari chamka rhi ai
Biwi ya gf hoti to petrol daal kr teeli lagati

Sent from my iPhone using Tapatalk

[levin]

She looks Russian

[ahmad_yar]

bhai jaan thanku fr ur prompt response..kindly tell meg pads kahan se milaen gae in lahore..also 3m products??

Ali bhai 3m u can get from dc studio lahore near kalma chock beside toyota garden motors, they do have meguiar's products also but not sure for the megs pads

I saw 3m pads with them

[venmouskiller]

@aerojet Bhai wo walay mf towels to kamal hai khi kab a rahay hai 3 4 aur lenay hai

sent from ashiq mezaj admi via kabooter

[Marwanpasha]

With respect to the thread and all fellows ,all detailing lovers should have gf or wife like this

Gf Is ke tarah kaprey peheney wali honi chaiye ya is ke tarah detailing mei haath btane wali honi chaiye. Aur shakalo surat ke baat tou nahi kar rahe hongey itna muje aap pe bharosa hai.

[ahmad_yar]

Nice JDM car bro and great unit :). As you have a used Axio I would suggest to clay it first so as to remove any bonded surface containment on the paint. So you have to follow the following procedure with the products IMHO:
Step1:Wash the car with Ultimate Wash & Wax and then dry the car.
Step2:Clay the paint using Meguiar's Smooth Surface Clay Kit.
Again repeat step 1.
Step3:As the paint seems in good condition so use a pure polish like "Megs Deep Crystal Polish".
Step4:In the end use "Megs Ultimate Liquid Wax" (included in the Smooth Surface Clay Kit).
You have to read the forum a lot to carryout all the above steps rightly, specially go through all the suggestions and recommendations of @vague_one and @ahmad_yar both being the gurus here. In the end I would like to add that these are suggestions as I understand and might not be accurate. So please do consider suggestions from hardened detailers here at PW.

Dear tahir bhai
Perfectly describe the process mashallah
Megs deep crystal is glaze without cutting , its rich oils deepen darken the dark shades very well however its white so my vote would be for ultimate polish as ultimate polish having micro abrasives alongwith polishing oils so also remove minor swirls , smoothan paint as well as polish the surface for clean pure white shade with deep shine , also being ultimate range so will also provide bounding compatibility with ultimate wax
Pls don't embarrass me by saying guru, u have best white ride mashallah and saying guru to me

[abzia]

Dear tahir bhai
Perfectly describe the process mashallah
Megs deep crystal is glaze without cutting , its rich oils deepen darken the dark shades very well however its white so my vote would be for ultimate polish as ultimate polish having micro abrasives alongwith polishing oils so also remove minor swirls , smoothan paint as well as polish the surface for clean pure white shade with deep shine , also being ultimate range so will also provide bounding compatibility with ultimate wax
Pls don't embarrass me by saying guru, u have best white ride mashallah and saying guru to me

Can the claying step be skipped by using ultimate polish by hand ? ... I haven't used clay before and am still skeptical

[ahmad_yar]

Hahahhahahahhahhahahhahhahahhahahahhahahahahha Ahmed bahi u made me laugh so loud

hans lo... mey lallchi hoya tey mera chota pra maha lalchii ?

Muhammad bhai buri baat , umar bhai elder than u so u can't laugh /moke on him but me can do but sara gunaha be tu muj gareeb ko hee milna hai

[ahmad_yar]

Can the claying step be skipped by using ultimate polish by hand ? ... I haven't used clay before and am still skeptical

Dear bhai claying not much difficult but provide ultimate clean, smooth , silky surface and as much smooth and clean surface as much u can get max outcomes from ur polish and waxes

Don't be worry, get ur stuff and make plan for any weekend for dc , dono bhai mil ker kuch na kuch ker layeen gye

Yes u can do ultimate polish by hand but jo ultimate results da se attay hain wo hath sa kahan

[abzia]

Dear bhai claying not much difficult but provide ultimate clean, smooth , silky surface and as much smooth and clean surface as much u can get max outcomes from ur polish and waxes

Don't be worry, get ur stuff and make plan for any weekend for dc , dono bhai mil ker kuch na kuch ker layeen gye

Yes u can do ultimate polish by hand but jo ultimate results da se attay hain wo hath sa kahan

Ok, won't think any further on claying/no claying, claying it is ! :).

Lastly you recommended claying + NXT 2.0 wax and cleaner wax inbetween. Don't I need some galze inbetween, rich oils etc, or white doesn't require any ? ...