Car Care and Detailing Dreams (Part 2)

[awais.9]

You should do the exact opposite thing. Washing before claying is much much much MUCH MORE IMPORTANT than after it. If someone does wash the car after claying, like I do especially when doing Opti-coat its totally an optional thing.

Clay hardly leaves any residues and these are usually removed once you end up wiping the car down or using a glaze.

As far as the reason goes of ONE watermagnet by the time you will be done with the whole car the watermagnet would have for sure dried. Keep it underneath a fan if you think it wont dry outside.

Get a detailer if possible for the claying process. Will help. Best of luck for the claying process !!

i thought of drying the water magnet then i thought of something n asked V1 about it too
i washed the car,didnt dried it...i was using shampoo foam as lubricant so after wash wasnt necessary but i still did it
clay process took around 1hr 40min as i wiped clay alot by applying shampoo foam continously in horizontal n vertical strokes on small area n then whole pannel n then washing off that pannel by water
after drying applied GC,n buffed it after 1hr

when i was waxing,crow dropped *** right in the middle of roof that i had already waxed n yet to be buffed :mad:

[AusI]

i thought of drying the water magnet then i thought of something n asked V1 about it too
i washed the car,didnt dried it...i was using shampoo foam as lubricant so after wash wasnt necessary but i still did it
clay process took around 1hr 40min as i wiped clay alot by applying shampoo foam continously in horizontal n vertical strokes on small area n then whole pannel n then washing off that pannel by water
after drying applied GC,n buffed it after 1hr
when i was waxing,crow dropped *** right in the middle of roof that i had already waxed n yet to be buffed :mad:

How did the claying go ? Did it end up picking any black colour ?

[msaudkhan]

AOA

im been watching this thread from some time n meet few nice people too like Ahmed bhai n Usman bhai n yea Kashif too. Ahmed bhai i been trying to contact kashif bhai from some time n i dont know y he's not replying me as i have some products which he said will get for me when v first talked now kashif bhai is not replying any more. any how i told u this scene kindly if possible any 1 can bring me some waxes n sealnts do contact me on 0333-3343435

[jibranmalik]

I have a Silver Passo, which polish would you recommend me to use on it, currently i'm using cosmic ? 2ndly which spray for dashboard, currently i'm using kangaroo leather & tyre wax.?
and lastly that some cat went on the top of the car and it made some scratches on the car windscreen how can i remove those ?
Thanks

[awais.9]

How did the claying go ? Did it end up picking any black colour ?

yea a little but from rear bumper n lower half of both doors,i have sent pics to V1,waiting for his reply

now when i went for walk,back pain + neck pain started,n i am sure i got all from claying lol

[vague_one]

my city 09 engine bay
thought to share it with u guys

MashAllah!

[vague_one]

Older members might know who the guy is........any guesses ?

[Nomi929]

Older members might know who the guy is........any guesses ?

Khurram (Speed Care)

[Shehrozeae101]

car was very dirty especially the tires...so gave it a quick wash with turtle f21 car wash shampoo...thanks chaudry 9 for telling me how to make foam.....wax wasnt removed so will wax the car after another wash..and since university starts on monday i dont think that would be happening any time soon......

[zxmco125]

Try to apply wax in this form.. you will get good result and will cover the whole part of the panel.

Applied Mother's Synt Wax.

[zxmco125]

@usman aka vague one
mabrook on another thread after successful of previous one.. Insha Allah our support is always with you and will learn from your experience in this new thread too

@ahmed_yar
zabardst result on surf bhai jaan

aapny surf ki dhulai krdee

[thekonsultant]

@vauge_0ne

Khurram

[hamza_xeg]

Members from Faisalabad?can you all tell me a place to buy turtle products in FSD?

[zxmco125]

Last sunday i was free at home. Suddenly got a call from a client. He needs to get his black city detail. So i said i am free now so i can come. He said ok. I prepare and gather my stuff in bag and went to his place for detailing session of City.

After reaching there i saw that the ride just came from a village visit.. Tyres have ******** marks

Anyway let the pix do talk.

before washing pix.

[awais.9]

MashAllah!

did u got the pm about clay with pics?

[awais.9]

Last sunday i was free at home. Suddenly got a call from a client. He needs to get his black city detail. So i said i am free now i am can come now. He said ok. I prepare and gather my stuff in bag and went to his place for detailing session of City.

After reaching there i saw that the ride just came from an village visit.. Tyres have ******** marks

Anyway let the pix do talk.

before washing pix.

pics are broken

[zxmco125]

As the weather is too coldy.. So i washed the car with car wash liquid and water. didn't took pix during wash. Then drying it off with microfiber towel. I started applying carnauba cleaner wax step 1 of turtle black box.

Difference shot.

[zxmco125]

After applying the first step of black box.

[zxmco125]

Before washing and applying wax steps.

after washing and applying step 1 of black box. Don't think that i didn't applied step 2 step 2 pix are on its way too

[zxmco125]

Final results after applying step 2.

Hood view.