Car Care and Detailing Dreams (Part 3)

[arkhitekt]

Advise needed.. got some deep scratches??

First and foremost, try using a compound. They wont eliminate completely. Some light ones might but the deeper ones exposing some metal will fade and get dim noticeably. And after compound dont forget to use a polish and then wax.

https://www.pakwheels.com/forums/showthread.php?t=272964

[abdullah.tiwana]

Any good detailing service provider in Islamabad or rawalpindi

Sent from my GT-I9500 using PW Forums mobile app

[qasim.raza.5872]

can i use clay bar after compound .
my car got some oversprays particles .
so am thinking to first compound it properly and after that whats left is would be cleaned out by clay bar .
what you say guys .Correct me if am wrong

No! This is the wrong method.
If you will compound by hand or machine without claying, you will scratch your surface as the contaminants will scratch the surface while you compound. You should first clay it.
P.S. This is my personal experience!

Sent from my iPad using PW Forums

[hamza_xeg]

I used plain water with clay and the results are

Before my car's paint was like SAND PAPER 

Sent from my iPhone using PW Forums

Not bad at all. However when I bought clay I was told to use Diluted shampoo by Ahmad bhai. I had maxshine claybar. Which one you used?

[peace-maker]

[ammadd]

Guys. I need some advice
My car is Honda Civic 2002 Gray color. My car is 24/7 outside due to no place to park inside house. Keeping it covered fully every time is very hard. So i just cover the dashboard when there is sun outside. Though i get it washed and then waxed (With Turtle Hard shell) every 15 days. Though petrol pump person use local shampoo. First guide me which shampoo should i use to wash and after that waxing with Turtle Hard Shell is ok? and will it protect my cars paint in Sun? Any other thing i can do to protect my cars color from fading..

[civic_90]

Guys. I need some advice
My car is Honda Civic 2002 Gray color. My car is 24/7 outside due to no place to park inside house. Keeping it covered fully every time is very hard. So i just cover the dashboard when there is sun outside. Though i get it washed and then waxed (With Turtle Hard shell) every 15 days. Though petrol pump person use local shampoo. First guide me which shampoo should i use to wash and after that waxing with Turtle Hard Shell is ok? and will it protect my cars paint in Sun? Any other thing i can do to protect my cars color from fading..

Use meguiars ultimate wash and wax. 1600 rupees. And use some good quality wax like the meguiars next gen tech wax. Also you need to cover your car. Good for you.

Sent from my SM-G925P using PW Forums mobile app

[ayub.anjum]

Not bad at all. However when I bought clay I was told to use Diluted shampoo by Ahmad bhai. I had maxshine claybar. Which one you used?

I used meguiars clay bar

Sent from my iPhone using PW Forums

[zeus65]

mashallah...! Share more.
And Tell us how you got so much depth and gloss out of this black beauty.
How do you maintain this nakhreela rang!

Sent from my SAMSUNG-SM-N900A using Tapatalk

[zeus65]

Hey guys, share plz what you use as a swirl finder?

Sent from my SAMSUNG-SM-N900A using Tapatalk

[civic_90]

can i use clay bar after compound .
my car got some oversprays particles .
so am thinking to first compound it properly and after that whats left is would be cleaned out by clay bar .
what you say guys .Correct me if am wrong

Never ever. First wash. Then clay. Then compound. After that wash again so all the residue would be cleaned.

Sent from my SM-G925P using PW Forums mobile app

[civic_90]

which rubbing compound?will it harm new paint?.till now there is no swrills aur swrils agye thu???? and remember this rounghness is 2 months old.its shinny but when i touch it i feels rough n it sounds like rough surface

Sent from my SM-E500H using PW Forums mobile app

Do you see the paiint particles which came from the workshop? If no, then no need of compounding. Just wash ur car, use clay bar with its dedicated lubricant and then wax it properly.

There's no other option. Conpound will harm the clear coat a little bit. I am not a detailing guru. Other members suggestions might me more helpful un this regard

Sent from my ALE-L21 using Tapatalk

Sent from my SM-G925P using PW Forums mobile app

[saeedmagsi]

Wsalam . Which car u have and car colour ? I am also from quetta , and would love to try my products on ur car.

Thank you so much mohsin bhai. You did an excellent work. It really did change the look of my car. You are an excellent person and a kind hearted man. Thank you once again.

Sent from my LG-F400L using Tapatalk

[mohsin47]

I am glad that u liked it saeed bhai .

Sent from my SM-N920I using PW Forums mobile app

[peace-maker]

mashallah...! Share more.
And Tell us how you got so much depth and gloss out of this black beauty.
How do you maintain this nakhreela rang!

Sent from my SAMSUNG-SM-N900A using Tapatalk

Thank you
First of all I washed the car with 2 bucket method. Then I clayed some of the areas where claying was needed. Then I washed the car again. Then I polished the surface and sealed it with Meguiars paint protect.
Its pretty hard to maintain black color lekin ab aadat hogai hai. I never do dry dusting. Always use detailer spray for dusting. And I wash the car once in 2 weeks.

[PlayMaker]

One last wash before Eid.

[hamza_xeg]

What are hose based lances & hand pumped foam guns ? For a normal foam lance, is pressure washer necessary ? I don't have a pressure washer but a household hose that delivers water with quite force.

[arzaam.bhatti]

What are hose based lances & hand pumped foam guns ? For a normal foam lance, is pressure washer necessary ? I don't have a pressure washer but a household hose that delivers water with quite force.

Normal foam lances only connect to pressure washers, they are shaped to fit the nozzle so you cant put a hose on them, then there are some lances that you can use with a regular hose but you have to search for them stuff like CG foam cannon and then there are some with dont require both and are hand pumped, infact i wont even call them a lance they are just pressure srpayers and do not produce any proper foam, very commonly available.

[hamza_xeg]

Normal foam lances only connect to pressure washers, they are shaped to fit the nozzle so you cant put a hose on them, then there are some lances that you can use with a regular hose but you have to search for them stuff like CG foam cannon and then there are some with dont require both and are hand pumped, infact i wont even call them a lance they are just pressure srpayers and do not produce any proper foam, very commonly available.

About the hose based ones. Are they any good then hand ones ? Got any brands and prices for the hose based lances?

[309]

Washed both my rides anticipating that eid is going to be tomorrow, however it looks like it is going to be on day after tomorrow.