Car Care and Detailing Dreams (Part 3)

[tripy_thunder02]

Oh, sorry I misunderstood, I thought you were talking about the wax. Yes, I did use the polisher but it was a rotary one.

[saad310799]

Oh. So you have experience for paint correction

[manni1]

Guys plz recommend any good detailing
shops/services in isb or rwp.. For complete ineterior exterior cleaning and paint coating/protection

[saad310799]

Auto extreme pakistan

Man is ahmed Sher rajput and a very nice person with extreme knowledge

[manni1]

Location?

[manni1]

Location is a bit far
Any other around Peshawar road, isb, g-13,g-10 side

[saad310799]

You have to lose something to gain

Best of luck

[farooqk80]

Join Pakistan Detailers Society on Facebook and ask there.

[effaf27]

i can have look if you are around g-11. You can check Protek islamabad in G6. Shift studio in g-9 if ypu strictely want an islamabad based guy

[muhammadtalhaqadir97]

Best pressure washer in 30k

[ifadey]

Best pressure washer in 30k

Buy induction motor pressure washer from kamran enterprises. I am using it for a year with no issues. Performance is superb as well.
Just ask them you need pressure washer with induction motor.

[xzap042]

Which model are you using? And does it have variable pressure settings and different width nozzle

[jklodhi]

Hi guys

I got protectant from Shell F6

But once I applied on my door panel , it has come whitish

What is reason and how to restore it.

Fortunately i haven't applied on any other surface except for single door.

[saqibhassan95]

But once I applied on my door panel , it has come whitish

What is reason and how to restore it.

Have you tried apc to remove that protectant ?
Secondly which protectant you got, please mention

[bored]

Which protectant have you used?

Was the protectant water based or silicone based?

Have you used any All purpose cleaner to clean the panel first or directly used protectant on the surface?

Have you applied it on cool surface without any sun exposure?

[jklodhi]

I have used black magic.

I have directly applied without cleaning with APC.

[bored]

Use good quality APC to remove it from the panel, then again try to apply it on inconspicuous area to check the results - if good then apply on whole panel.
For desired results in interior dressing always use it after thoroughly clean the panel with APC.

[saqibyasin]

Dear All Asalam o alekum
I tried compiling the information, but from different opinions and various comments, everything is mixed up:-p
So, can you help to share some suggestion for products
My Car (2020 AGS Cultus)

1- Interior care (for whole plastic, door pannels, dashboard, etc)
2- Tyre shining product
3- Wax
Please advise, shall i go for the glass coating for car to protect its shininess and paint for long time period
- Where to buy all above products. : Pakwheel or any place recommended in Karachi

[saqibhassan95]

Interior care (for whole plastic, door pannels, dashboard, etc

Carpro perl or tac system seal

Tyre shining product

Tac system tyre dressing

Wax

It's person dependent
Whether you want hard/paste waxes or liquid or spray waxes or better sealants

Where to buy all above products. : Pakwheel or any place recommended in Karachi

Atleast after finalizing, which products you are going to buy, then I can recommend dealers/stores

[bym007]

1- Interior care (for whole plastic, door pannels, dashboard, etc)
2- Tyre shining product

This is a 2 step process; clean and protect.

For cleaning plastics (interior, dashboard etc), diluted APC (dilution ration 10:1 to 20:1 depending on how dirty it is) is what you require. For cleaning tyres, once again diluted APC (4:1 to 10:1) will do the job nicely.

For protection, I recommend CarPro PERL for both interior and tyres. I apply undiluted PERL solution to the dashboard, plastic surfaces and tyres after cleaning.

Check my interior clean video series here.

Check my video on comparison of various dilution ratios on tyres.