CB350 rebuild at home

[vickytulla]

and also White vinegar + with scotch bright

thank you janab for superb tips i go through this but i heard using coke with aluminum foil gives more better results

[vickytulla]

@yasirsa for your eyes :

A friend who I meet randomly on the workshop where I get my bike serviced.

[yasirsa]

wow vicky ask him for points

[vickytulla]

I did, he was bought them from Karachi during the restoration from area called ranchore lines in used but good condition.

I havnt visited bilal ganj so far, I am very hope full I may find some thing there will let you know about it.

wow vicky ask him for points

[yasirsa]

Thanks alot Vicky

Sent from my LT26i using PW Forums mobile app

[yasirsa]

Update .parts are going for polish bufff I did an experiment using aluminium foil paper. Results were not as I wanted rest the pics will tell the story. I take off tire from rim no puncture found and rear tire manufacture date is 1st month and year is 74 if this is sure date am really impress. Bridgestone :thumbup:

Sent from my LT26i using PW Forums mobile app

[margallar]

vicky sab i am considering abbasi sab suggestion he told not to chrome just polish its own chrome first to see the results. i need to open its spoke wires and every part that needed chrome buff and need to learn how to paint as am going to try paint as well lots of work is pending. let see

Brasso is great for reviving chrome, you just need patience

Sent from my SGH-T989 using Tapatalk

[msabbasi]

Update .parts are going for polish bufff I did an experiment using aluminium foil paper. Results were not as I wanted rest the pics will tell the story. I take off tire from rim no puncture found and rear tire manufacture date is 1st month and year is 74 if this is sure date am really impress. Bridgestone :thumbup:

Sent from my LT26i using PW Forums mobile app

Yaser Sb. do you have galvanizing facilities in Peshawar? If so, the quality of galvanizing is good in Pakistan. Some of the items could be galvanized such as nuts/bolts maybe the spokes.

Just a word of warning, buffing will remove most of the remaining chrome from the items. Just use chrome polish and do the work by hand. If you are still not satisfied, then think about your next step very carefully.

[yasirsa]

hahaa Abbasi sab ya kia cheez hoti hay :P. app to nazar nahi arahay aj kal i was about to call you to ask. khair i will do what would be best for it kia karrain ab pakistan hay . but he will do it under my supervision

[farazarif]

Tires are 2001 and not 1974. The last 2 digits would typically depict the year.

[yasirsa]

Brasso is great for reviving chrome, you just need patience

Sent from my SGH-T989 using Tapatalk

i have it with me but nickle layer is also gone and which is usually base coat on iron.

[msabbasi]

hahaa Abbasi sab ya kia cheez hoti hay :P. app to nazar nahi arahay aj kal i was about to call you to ask. khair i will do what would be best for it kia karrain ab pakistan hay . but he will do it under my supervision

Galvanizing to urdu main "just" kehte hain. "Justi chadar" ka to suna hi ho ga.

[yasirsa]

yes yes yes just right pata karta hoon

[yasirsa]

Abassi sab can you help me locating an oil seal 33 46 10?

Sent from my LT26i using PW Forums mobile app

[msabbasi]

Abassi sab can you help me locating an oil seal 33 46 10?

Sent from my LT26i using PW Forums mobile app

Ok. Tomorrow I'll call my seal supplier and find out if he has it. How many pieces do you need and also how critical is the 10mm thickness? Will 8mm or 11mm be OK? or is 10mm absolutely critical?

[yasirsa]

abbasi sab thickness could be upto 12mm i have got 32 46 6. and am planning to add dual oil seal .i required 33 inner bore outer 46 and thickness 6. company oil seal has dual collar that's why if you could find out 33 46 10 with dual collar than it is company size.

[msabbasi]

abbasi sab thickness could be upto 12mm i have got 32 46 6. and am planning to add dual oil seal .i required 33 inner bore outer 46 and thickness 6. company oil seal has dual collar that's why if you could find out 33 46 10 with dual collar than it is company size.

Yaser Sb. bad news. I checked out most of the motor cycle markets in the Pindi area and also my seals supplier. No one has this seal. When I told the size to my seal supplier he immediately asked if this was for shock absorber. The seal supplier advised me to take two 6mm seals and fit them back to back as you are already thinking of doing. Only one shop guy who works on heavy bikes said I need to look in Karachi. He didn't know of any particular shop. So telling me to look in Karachi without any precise place is what I call a "huwai fire".

Maybe an online purchase from SzimeringShop - szimering Page 5. Prices are in Hungarian Forint, 1 Hungarian Forint equals 0.0045 US Dollar. So the one you need is 5.29 USD per seal.

[basic]

Your project encourages me a lot, best of luck.

[yasirsa]

thank you Abbasi sab apko takleef di . am using dual oil seal now

Yaser Sb. bad news. I checked out most of the motor cycle markets in the Pindi area and also my seals supplier. No one has this seal. When I told the size to my seal supplier he immediately asked if this was for shock absorber. The seal supplier advised me to take two 6mm seals and fit them back to back as you are already thinking of doing. Only one shop guy who works on heavy bikes said I need to look in Karachi. He didn't know of any particular shop. So telling me to look in Karachi without any precise place is what I call a "huwai fire".

Maybe an online purchase from SzimeringShop - szimering Page 5. Prices are in Hungarian Forint, 1 Hungarian Forint equals 0.0045 US Dollar. So the one you need is 5.29 USD per seal.

[yasirsa]

Your project encourages me a lot, best of luck.

for rebuilding GTO? i had gto in 2002 and trust me she was charming beauty at that time i spent too much on gto. time time ki bat hay .