CD 70 Striptease :P

[asjdsm]

good safai sutrayi..

but service station walay banda ko daik ka and samaj ka faisla karthay hai.. anyhow its good its clean now...

[mfdarvesh]

Kia baat hai
Yes training hamain bhi karwain je take ham bhi es tarha he washing kar sakain

Very good cleaning, indeed

[mahmood]

Mahmood sahab aap ne toh is ki Rooh tak ki safai kar di Well done !!!

thanks lala ji, it was long over due, all servicing she was having was from rain for some time, i use to park her in open area of garage during rain and tuck in vespa and car under covered portion of garage

[mahmood]

Kia baat hai
Yes training hamain bhi karwain je take ham bhi es tarha he washing kar sakain

Very good cleaning, indeed

Thanks, no special training needed bro, only dedicated tool in complete process is 8mm T spanner to open side cover, rest it all pretty straight forward, engine itself is on two 13mm long bolts bolted to the backbone and one electrical grip and you are good to go, its very light too i guess no more than 7-8kg.

[Juste]

very good bro

[N0m1]

Wah man its nice.U done every thing ur self.

[mahmood]

very good bro

thanks bro

Wah man its nice.U done every thing ur self.

that was easy bro, done it for the second time:D

[daniyalahmad]

Wah gee wah!
Nicely done.

[mfdarvesh]

Thanks, no special training needed bro, only dedicated tool in complete process is 8mm T spanner to open side cover, rest it all pretty straight forward, engine itself is on two 13mm long bolts bolted to the backbone and one electrical grip and you are good to go, its very light too i guess no more than 7-8kg.

Thanks
Khual to jae ga par phir jurna nahin hai

[mahmood]

Thanks
Khual to jae ga par phir jurna nahin hai

lolz, trust me, one cant fail at this this thing at least, herez all what is needed to be done
* un lock the chain and remove it
* remove clutch and throttle cable
* remove cylincer from head, 2 bolts wo ho gaye and one nut for cylincer rear bracket
* one wiring grip under right side body cover
* and two nuts that hold the engine to backbone and it will drop down

nothing that can go wrong at all

[umerchaudhary]

Itne mehnat se apne service ke ha bike dobara waise he ho jaege because it looks k apke bike ke engine seals dwalwane wale hain in ko dwalwalain warna yeh syapa bar bar hoga.

[dr3vil]

kafi time k bad aap ki koi thread aye kia bat hai
waise i like to share k jitne bhi mechanics and servise walay hain free ki kamai karne k lye baithe hainlike we have money growing on trees

[mahmood]

Itne mehnat se apne service ke ha bike dobara waise he ho jaege because it looks k apke bike ke engine seals dwalwane wale hain in ko dwalwalain warna yeh syapa bar bar hoga.

seals were long over due and finally changed them when my bike start to whistle with compression leakage last month safai wala kaam baqi tha so wo bhi ho gaya, inshAllah it will remain saaf suthri from now

[r1]

Good Work Ustad Ji (H)

[KaaasH]

gud job man,,, thanks for sharing..

[mahmood]

guys problem reemerged, head gasket has leaked once again, its third time its leaked, any suggestions, soon she will be once again all drenched in oil like before this shower.

[asjdsm]

how was the last gasket installed ?
what chemical was used ? silicon or curil ?
i have tried curil its awesome for that part .. but condition is that u do it all to cool engine and do not imediatly start using it .. wait for at least a day so that all the chemical has bonded ..
waiting to listen from u ..

[mahmood]

@asjdsm
i dont have a clue to your question, its like this that Tahir Autos ( honda 3S ) at aabpara market is like right next to my office, i dropped bike to them and said k falan falan kaam karna hai, and i walked to office and received ma bike at around 1600 HRS, kia hua kaise kia have no idea but it started to leak again, its the had seal that leaks each time and not the cylinder, same this time. le me thinking something else this time i'll drop engine down take it to the kharadia to re thread the sump nut and i'll change the gas kit myself, i'll have timing on by a mechanic but sakoon se kaam tu karon ga atleast, what do you say?? tools anit any problem for me at all

[asjdsm]

@asjdsm

i dont have a clue to your question, its like this that Tahir Autos ( honda 3S ) at aabpara market is like right next to my office, i dropped bike to them and said k falan falan kaam karna hai, and i walked to office and received ma bike at around 1600 HRS, kia hua kaise kia have no idea but it started to leak again, its the had seal that leaks each time and not the cylinder, same this time. le me thinking something else this time i'll drop engine down take it to the kharadia to re thread the sump nut and i'll change the gas kit myself, i'll have timing on by a mechanic but sakoon se kaam tu karon ga atleast, what do you say?? tools anit any problem for me at all

timing aint any issue..have u done it before ?
u can reface the face of the cylinder and head if there is some warpage ..
use good quality original gasket .. and try curil this time .. mostly mechanics nowadays use silicone.. but its local made item sometimes it works others it not.. curil is german made so same quality..
if u dont know how to tiume it i wont suggest opening it..as just few minutes of ride at wrong timing is enough to seize the engine..

[mahmood]

timing aint any issue..have u done it before ?
u can reface the face of the cylinder and head if there is some warpage ..
use good quality original gasket .. and try curil this time .. mostly mechanics nowadays use silicone.. but its local made item sometimes it works others it not.. curil is german made so same quality..
if u dont know how to tiume it i wont suggest opening it..as just few minutes of ride at wrong timing is enough to seize the engine..

timing so far have not been done by hand, but twice had running commentary on how to put timing chain on while it was put on, my question is if surface is wrapped why didnt it leak just after two days? and yes absolutely no running on doubtful timing chain at all.