As this grill under the the Bonnet Hood wasn't available in the market. So I decided to solve this problem by making a Replica Front Garnish Grill. For this purpose I took a piece of 20 gauge Galvanized Steel Plate. Got it cut and pressed on a Heavy Duty Press Machine at Majid Khan's Auto Body Parts Makers at Chauburgi, Lhr.
Majid Khan is at work in making of Replica Front Grill.Sheet is Being pressed on Heavy Duty Press.Some more pressing for Grill.Bending for Horizontal CurvesMarvelous job done by Majid Khan.Making Front Bonnet Opening HatchBending The GrillSome more detailing.....!!!Refining Bonnet HatchRefining Bonnet Opening Hatch by gas welding.Detailing work by gas welding by Nadeem Denter.More refined detailing work with the help of gas welding by Nadeem Denter.
For Paint Job: its basic preparation is initiated by Painter ''Raju Rocket''.
gone through whole threadand man no limo pleasealso if u want put some good 17s on it and lower her a bit as EF looks so hawat with 17s
If engine is good then its better else swap in 3 stage vtec D15B and 16 BBS or Enkei wheels. Can you pm me the cost for denting and painting.
Looks like denter and painter are very generous to their work, they are doing good job with good speed if i am not wrong.
To smooth the surface, Painter Raju Rocket is spreading Steel Pateen.
Side PannelApplying Steel Pateen on Side Pannels. Some more detailings on Side Pannels.
The Rear Bumper of Civic 91 is unavailable in the market. So my denter tried his best to restored it to its original shape by placing an iron sheet on its top. As it is shown in the pics.Iron sheet is being fixed with the help of Silicon and rivets on rear bumper's top.Re-furbished Upper top of rear bumper.Fixing bumper lip to the bottom of rear bumper.Making hole for exhaust pipe. Markings for exhaust pipe.
This Bumper Lip was made from an old stock of wear out rear bumper of Civic 2002 model by cutting its bottom.Bumper Lip made by cutting rear bumper of Civic 2002.Cutting the extra piece of home made bumper Lip.Some more cutting to make it fit to the rear bumper.
I myself gave this idea to my denter, but he refused to do so, as he was insisting to attach a fiber glass bumper lip to the rear bumper but in my opinion,fiber glass bumper are not so strong and do not last longer. So I compel my denter to make rear bumper lip by cutting an old useless wear out rear bumper of Civic 2002 model.Some more delicate cutting for exact fitting.Cutting the extra piece of home made rear bumper lip.Rivet.Hole for exhaust pipe.
Looking forward to more pics. Thread subscribed.
This rear bumper Lip is made by cutting and utilizing an old wear out rear bumper of Civic 2002 model.
Extra sides of the bumper lip are to be cut after fixing rivets.
Extra rear bumper parts after cutting.Extra pieces of Civic 02 rear bumper after cutting.Extra useless pieces of rear bumper of Civic 02.
Rear bumper with home made bumper lip.Inserting Rivets to fix rear bumper with the bumper lip.Inserting rivets on bumper lip.Inserting rivets.Drilling for Rivets.
In my opinion, so much drilling will leads to the lose the originality of the bumper. What will you do to hide the drill holes when the bumper will be painted ?
After the spreading of steel pateen and sanding, Now its time for Deco pateen !!!!
I asked my painter to shower a coat of ''ICI Burger VITON'' as 'first' Premier. But he said that its not necessary but I've, earlier, learned from a renowned Auto Car Painter of Porsche Company, So I insisted my Painter to shower a coat of ''Viton'' as first Premier to the car's surface.
Front & Rear Bumpers support and License Plate Holder.
Making holes for ''Mugen'' monogram.Holes
nicly done. your denter looks very experinced and paying attention to work.
nice work MashAllah.. Best of luck!
Nice work done bro.
Lets hope it pays off.
Excellent workmanship the denter did a great job.
IMHO plz lose the rear bumper lip. Other than that...... it looks sublime
Dear no Drill holes and rivets will be seen after paint job. As in the coming thread I'll show u all how I'll do this with my denter painter team.For this, I'll guide my painter to rub the upper portion of the rivet's top(head) & apply some Steel Pateen and Deco Pateen, respectively, so that to equalize it with the bumper's surface.
According to the painters of Porsche Company, if Deco pateen is applied to the whole surface of ur ride then it is imperative to apply One Coat of ViTON. But our Desic Painter don't agree to this notion.
High Motors Workshop. owned by Mian Nadeem. Who is also my Leading Consultant.
Mian Nadeem.
Excellent restoration
