Civic 91 EX Oriel LOF 4502 (4th Generation) Restoration Project

[farazarif]

Lovely account of the work being done and the stages involved, best of luck!

[raahimraheen]

Alabaster Silver Metallic paint showered.

[raahimraheen]

Topless Silver Metallic paint is sprayed on CNG cylinder and its stand.

[irfan834u]

Very nice

[raahimraheen]

[raahimraheen]

Octobase ''Octoral MM-412 Metallic Black'' Paint is sprayed on different parts of the car where Black paint is needed, such as Front Bumper Grill, Front & Rear Bumper Moldings, Wiper Arms, Dash Board Air Vents & on doors top frame etcc.

[raahimraheen]

[raahimraheen]

As Original Door moldings of this CAR ISN'T AVAILABLE. So I decided to fix Door/side moldings of Which resembles to this one.

.

[raahimraheen]

Universal side molding is purchased in order to avoid unnecessarily botheration.

[raahimraheen]

[shaheryar.khokhar]

Going good but m not sure about this rear bumper, looking a kind of rice or maybe it will enhance the look after the paint job. Get your rear lights cleaned properly especially the right one. Do not forget to ask the painter to remove the paint from the door key slot, inner fuel cap and other small edges which will enhance the finish look.

P.S Waiting for more updates!

[raahimraheen]

''MUGEN'' monogram is attached on Rear Right Hockey below Rear Right BackLight.

Holes for MUGEN monogram

Holes of the monogram are sealed with the help of silicon.

''JDM'' Stock photo of MUGEN monogram

[raahimraheen]

As 91 Civic Original Antenna isn't available in the vicinity ,So I decided to make a replica Antenna by using the inner machine of Universal car Antenna in the OEM Original base of Civic 91's Antenna.

Drilling holes.

The ''inner machine'' is of Universal car antenna & the base is of OEM civic 91 's Antenna.

[raahimraheen]

Restoring Doors plastic Sills by HOT PLASTIC WELDING.

Adjustable/Tilt Steering purchased from Bilal Gung.

New Meter Cover with Meter Light Volume Switch, purchased from Bilal Gung.

[z0haib]

Loving every step of the restoration keep the pics coming !!!

[raahimraheen]

The OEM Rear License Plate Lights are purchased from Asif Shop No.117 Bilal Gung, and installed in the rear bumper before fitting.

[raahimraheen]

After having done the Paint Job, all the Interior is put back to its original place after cleaning.

5 Star's Jumbo sheet insulation is placed beneath the carpet.

[raahimraheen]

The Rear Bumper is at-last completed and is now fixed. Its beauty will be enhanced after it is painted.

[mansoor_qadir]

Keep pics coming.Gr8 going

[raahimraheen]

Now the car is departing from denting/painting section. The next destination is Electrical Job.