Connecting low beam with high beam

[harrisali89]

Hi

Does anyone know how to connect the high beam with low beam.
In other words i want that when i switch to high beam, the low beam also remain switched on.

I know that the above mentioned is not safe for the normal bulbs but i have installed leds and so it is necessary for their effective functioning.

Thanks
Harris

[xzap042]

Hi

Does anyone know how to connect the high beam with low beam.
In other words i want that when i switch to high beam, the low beam also remain switched on.

I know that the above mentioned is not safe for the normal bulbs but i have installed leds and so it is necessary for their effective functioning.

Thanks
Harris

which led did you install? check this thread, you can connect low beam wire to both low/high connector.

I did a check on wiring today and it seems that the previous owner did the work done from some idiot electrician, i mean in the fuse box there is clearly mentioned A/C relay and a relay is also installed, but still he installed a relay for compressor clutch near it and wired it straight to alternator without any fuse! or is my understanding wrong? also the wiring is a mess all wires are taped together no labels whatsoever, seems like i'll have remove the tape and redo all of it, group wiring p…