Cultus 2001 - things to change

[umairbvs]

HDIP doing the rite thing i think. better cut the head of the cylinder before it blasts and cuts the life of 10 15 ppl

[Xulfiqar]

What about exhaust manifold modification for Head gasket prevention???

yep - takes 5 minutes with a saw.

[MZubairAziz]

get a new set of tires!!

[umairbvs]

one of the options is that u can visit a suzuki dealership and they will inspect all the things and recommend u the things to be replaced. but they usually charge 4-5k for this inspection.
u can then replace things from there or outside mechanic it will depend on you

[chdemon]

yep - takes 5 minutes with a saw.

@xulfiqar bhai. does any of your thread shows any information about this ? i mean either explained very well or by picture or anyway i can understand so that i can do it in my own ride ?

[chdemon]

What about exhaust manifold modification for Head gasket prevention???

can you please also shed light how can i do that. as xulfiqar bhai said. but since he is very senior member and his time is precious. so i would request senior member than me to help me out in this one.

Can you please guide ?

[umarkhan1]

can you please also shed light how can i do that. as xulfiqar bhai said. but since he is very senior member and his time is precious. so i would request senior member than me to help me out in this one.

Can you please guide ?

https://www.pakwheels.com/forums/performance-modification-tune-up-preventive-maintenance/181721-cultus-engine-body-overhaul-rebuild-26

[chdemon]

https://www.pakwheels.com/forums/performance-modification-tune-up-preventive-maintenance/181721-cultus-engine-body-overhaul-rebuild-26

Thanks bhai... got it. Now i can explain to the mechenic as i dont have necessary tools.

[jagger]

get the platinum plugs then 3 for 900 ngk bkr6egp

[chdemon]

@xulfiqar bhai, need a bit of help again.

Now car is running smooth on CNG and Petrol both. But the issue which is now that when i turn on AC then the pick is so so so slow that i have to turn off AC to have some power to cross traffic. Can you please tell what could be the issue and what i can do to prevent and increase pick on AC.

cc @umarkhan1, @agoodfriend

[umarkhan1]

@Xulfiqar bhai, need a bit of help again.

Now car is running smooth on CNG and Petrol both. But the issue which is now that when i turn on AC then the pick is so so so slow that i have to turn off AC to have some power to cross traffic. Can you please tell what could be the issue and what i can do to prevent and increase pick on AC.

cc @umarkhan1, @agoodfriend

On petrol also??

[Xulfiqar]

@Xulfiqar bhai, need a bit of help again.

Now car is running smooth on CNG and Petrol both. But the issue which is now that when i turn on AC then the pick is so so so slow that i have to turn off AC to have some power to cross traffic. Can you please tell what could be the issue and what i can do to prevent and increase pick on AC.

cc @umarkhan1, @agoodfriend

sounds like a very bad tune on the engine if the car is lazy as a turtle on petrol.

[chdemon]

sounds like a very bad tune on the engine if the car is lazy as a turtle on petrol.

@Xulfiqar bhai, Top speed is 90 KM / h which i have got till now. with AC on it gives 85 km / h maximum. but Pick while AC on is too slow on both. but Pick otherwise on CNG and PETROL is good without AC on. i am not sure why is so.

I discussed this issue with the SUZUKI guyz and they said you vaccum is not working properly so once adjusted it will help in pick. so the question is WILL IT REALLY HELP ?

[chdemon]

On petrol also??

AC dono pay hi asa hay. on CNG and PETROL as well. i will double check tomorrow morning AC on PETROL.

[umarkhan1]

AC dono pay hi asa hay. on CNG and PETROL as well. i will double check tomorrow morning AC on PETROL.

thora sa to farq prta ha ac se on petrol also.
hydraulic lifters ki kia condition ha?

[chdemon]

thora sa to farq prta ha ac se on petrol also.
hydraulic lifters ki kia condition ha?

no idea bro what are these :). sorry newbie here :). first car and only 1 month before i bought. so looooots of things to learn.

[Xulfiqar]

@Xulfiqar bhai, Top speed is 90 KM / h which i have got till now. with AC on it gives 85 km / h maximum. but Pick while AC on is too slow on both. but Pick otherwise on CNG and PETROL is good without AC on. i am not sure why is so.

I discussed this issue with the SUZUKI guyz and they said you vaccum is not working properly so once adjusted it will help in pick. so the question is WILL IT REALLY HELP ?

that is extremely poor running. check the distributor.

[umarkhan1]

@Xulfiqar bhai, Top speed is 90 KM / h which i have got till now. with AC on it gives 85 km / h maximum. but Pick while AC on is too slow on both. but Pick otherwise on CNG and PETROL is good without AC on. i am not sure why is so.

I discussed this issue with the SUZUKI guyz and they said you vaccum is not working properly so once adjusted it will help in pick. so the question is WILL IT REALLY HELP ?

which vacuum? R u talking about vacuum advance in the distributor?

[xain10]

AOA i own a cultuscarby 06 my ride is also a messed up ride it also does not move up from 90km/h , regular oil change +filter change ,and air filter is also regularly donemy ride gives 80km per cylinder if driven local and around 120-130 km both without a/c on highway usually sargodha faisalabad road ,eventhought the cng tunning is done by my mechanic along carburator spray , but i dont think so that is a fair fuelaverage anyone, the ideal rpms is set at 1500 rpm plz help me what to do and i suppose u r from sagodha so if you can suggest me some good workshop in sargodha for cng setting

[umarkhan1]

AOA i own a cultuscarby 06 my ride is also a messed up ride it also does not move up from 90km/h , regular oil change +filter change ,and air filter is also regularly donemy ride gives 80km per cylinder if driven local and around 120-130 km both without a/c on highway usually sargodha faisalabad road ,eventhought the cng tunning is done by my mechanic along carburator spray , but i dont think so that is a fair fuelaverage anyone, the ideal rpms is set at 1500 rpm plz help me what to do and i suppose u r from sagodha so if you can suggest me some good workshop in sargodha for cng setting

i do all things my self with the help of some senior members.
could be many issues.first of all do a compression test and it will the whole story.