Cultus 2010 Muffler/Sports intallation guide.?HELP

[harris24]

ten from where i can get good piping and muffler...Muffler(any brand)and piping of which size??

[rx8_fanatics]

u can get tuneable muffler from mintogemry road lahore! piping can be made from any exhaust wala guy at lawrence road!
2.5" piping is best!
u wont find any branded muffler in market they all are chinese copy!

[harris24]

@ rx8 ..THx bro..!!

[mani1]

1)Get any free flow exhaust
2)1.75"=2" piping (inner diameter)
3)3-1 headers (get specs from teamswift or suzukiRD)
4)Simota Airintake / or build a custom one
5)Get plugs and wires changed
6)Order a light weight flywheel from SuzukiRD

You should be able to beat the new stock city after these mods

[wasay_ahmed]

This Suzuki engine got good potential.
First of all remove CNG
Now u can also turbo charge this engine and run 4 5psi which will safe enough.
For both N/A or Turbo setup the main mod for which u must go for is Bigger flywheel of Baleno 1.3 or 1.6 as this model got genuine problem of poor clutch so u cant get good potential on stock clutch.Although it might heart internals a bit but not so early as have seen many efi cultuses on this frank setup n they surely easily eat 1300cc gli city etc..
Rest go fro 4-2-1 Headers @mani1 its 4 cylender engine.
Intake is just like boltonn fit on stock pipe only ahve to remove filter box n use filter cone,mushroom as per ur choice.
Hot Wires
iridium Spark plugs
Msd coil n amp etc hence many mods can be done on this motor

[iLLDuDe786]

read the thread with open eyes! it is clearly mentioned up there!

yar tum tou ghussa kar gaye kher

@op i will suggest you to use 2.25inch inner piping which i think is best for cultus, 2.5 is a bit too much IMO

[harris24]

@wasay..nice setup told though..but bro my car iz hardly a month old...so better get only the piping and muffler changed..for a bang..!!

[ghost_riderr1]

agreed with wasay...

only muffler n piping wont effect much..
i must say u just wait save some cash n apply these mods.. u surely will enjoy otherwise the sound will irritate others
though 2" piping will be enuff for cultus

[haris001]

@wassay +1 :-))
@haris yeah boy go for a muffler with downpipng and it ll be great!!!
plus it would also save the original pipng from any modifications ............just take the whole original pipng off and replace it with a custom made one and u r ready to go!!!!
as far performance is concernd .......wassay bhai has told u a lot!!! :pp

[harris24]

ya..thx to wasay..but in the mean time my budget is low..and as the cars new so I would prefer only a muffler and piping...!!

[JamalBukhari]

[I]haris contact me bro..i ill guide u da best..

text me

0343-4044402
[/I]

[hassam]

guys let him do muffler and pipping first..

[accord7362]

@haris yar lets keep her virgin for couple of months & than start doing the changes & fancy stuff

[wasay_ahmed]

well its ur choice wht to do or not.Wth slipping clutch extra torque n power will be of no use thts the point

[Zaheer_Zaidi]

without piping there is no gain of muffler... the sound depends on piping....

[chinyoti]

Do what ever, spend extra money please get something bolt on fit. Avoid altering geniune fittings. i mean weld cuting ur genuine cylincer and weld fiting a new one (mufler/exhaust. u wud always be going to get leaks welded every now and then.

[luckybilal]

No mod so far

[pwuser149510964772]

At first boht acha lagta hai muffler lkn afersome time it feels k kisi bus me bethy ho or shadid sar dard krny lagta hai is liay muffler is not good for daily driven cars

[Hassan1991]

bhai you digged it.

[pwuser14874887999]

Which is the best Turbo option For Nov 2016 Cultus G10 Engine. Need urgent reply