Which engines can be swapped in Cultus? Without any alteration, it should be bolt on fit.
all suzuki g series engine can be swapped in cultus without alteration I think suzuki m series engine could also be swapped bolt on through not sure but have seen on many forum that ppl swapped suzuki jimny old g13 with m13a
G10 to G16 I guess. I'm not sure
G16 That's going to be a monster combination, has anyone done it here on Pakwheels?
Yes some members have done it.
yup @dragonheart786 has 1600cc engine in his cultus
Yes i have done this and results are awesome but who say bolt on fit isnt true Some mods needed to fit g16b in it
Sent from my iPhone 6 plus using Tapatalk
g series sohc engines are bolt on with change in wiring only and a/c plumbing a lil bit due to less space i guess. in dohc g13b is bolt on and g16b requires modification as it was built for baleno actually.
go for g15
G15 is a good choice G13 is also for baleno but ask your mechanic he can fit engine in your chasis plus ask him what are necessary things need to be done for g15 or g13 or g16 You will get an idea plus what is your budget for swap
https://www.pakwheels.com/forums/d-i-y-projects/240276-cultus-g16b-projectIt was my project of car swap you can check the whole thread read everything
Not planning to swap now, but if brother likes the idea than we will, I will keep all of you update, thank you for all your valuable suggestions.
5,6 years back someone swapped b16a into cultus and they posted the pics here on pakwheels.
Seriously? Chassis to nai bent ho gayi?
yes something of that nature happened, I think the project was a failure.
But maza bohut aata hoga, 650kg car + high revving motor, only if chassis of cultus was strong enough
If someone interested in g13b twin cam complete setup that includes gear engine air cleaner . All sensors intact with wiring harness as ECU. Do contact me on 03479823452 .
