you done it very clean.
Can to do this in my car? i will pay you charges.
i have toyota corolla 2004.
Thank you But I'm really sorry I wont be able to help you with that because I hardly get free time these days.
Thanks Brother
chaa gy ho shehzadaywe cant say its diycz everyone cant do it neatly like u......
Thank you
bro am using pioneer audio mp3 player with ganuien usb support in it since last 5 yearsbut yeh thread dekh k dil kr raha hai k main bhe aisa he krun ....
say some thing about its sound quality
The sound quality is very nice. Infact, its better than cd quality.
i hear a lot songs in different hiace during journey but i note very rough sound quality in all hiace play similar usb player its reason
That is mainly because of low quality head units, low quality speakers, low quality wiring. If connected to a proper headunit with properly functioning speakers, the controller itself has quality sound.
Yaar kit DIY to smjh agyi but khtam apni 7th gen ka headunit kholna ni Ata xD
Sent from my HTC Wildfire S A510e using Tapatalk 2
this alpine cassette player is install in my car suggest me i install this usb player in this or notif yes then explain wiring of this cd changer jack
You can use the CD Changer port at the back for audio input. The picture above shows the pin out for the cd changer port.
If you can tell me for P1Y
Buy some good quality MP3 player to enjoy ... These cheap Chinese USB are waste of time
a. o. a... b i need flexible ribbon cable of addzest max 420.... plz guide where can i...
What is the level of technical expertise required to safely and successfully complete this modification?
Pin number 3 seems to be responsible for the memory feature, and I need a constant supply. To identify the right pin for a 12-volt power source that turns on with the ignition, I'm planning to use a multimeter or a small bulb.
Did you encounter any unexpected benefits or drawbacks after implementing the modifications to your head unit?
Pin number 3 is there probably to give a constant supply for the memory feature of the headunit. Another one of those pins should get 12v when the ignition comes on. If you have a multimeter, you can check the pins one by one by turning the ignition on and off or you could use a small bulb aswell. Another source of getting the power so that it cuts out when the ignition is off is the cigarette lighter's power.