DIY Suzuki Swift 1989 LED speedometer

[kamii1]

what power resistors did u used ?

[AsevenX.foREVer]

Yaaar bhai ek masla ho gya hai.. main nay meter khola tha aur pata nae Fuel aur Temperature ka kia system hai wo garrbarr ho gya hai.. aap nay in dono gauges ko wapis fix kaisay kia tha? Please help yaar

[umarkhan1]

Too much bright speedometer results in head ache, and less visibility.
i am telling this cz i have experienced this on my friends car

[9900GT]

umair dost led ki brightness kaysay barhaygi

[asad1]

Too much brightness irritate in night driving

[brownrose78]

umair, fix a regulator(dimmer) to control the intensity of speedometer, too much intense is shown in picture, try to reduce it via regulator & do something for needles as they are not matching

[jagger]

Yaaar bhai ek masla ho gya hai.. main nay meter khola tha aur pata nae Fuel aur Temperature ka kia system hai wo garrbarr ho gya hai.. aap nay in dono gauges ko wapis fix kaisay kia tha? Please help yaar

are your gauges working or not??? or there is some issues with the needles position???

[jagger]

use nail polish remover to remove paint but be careful nt to touch front panel otherwise paint on front on the panel will be removed as well

you can do sanding as well to make the dial transparent

[AsevenX.foREVer]

are your gauges working or not??? or there is some issues with the needles position???

I un-assembled the fuel guage by opening the nuts at the back due to which the whole guage (opened) was in my hand and i didn't know what to do. I got it assembled back perfectly but now the calibration of the fuel guage & speedo pointer both are not properly calibrated.

Speedo shows 0 on 20, 40 on 60, 80 on 100 etc
and fuel is empty when the pointer is still above E -_-

[AsevenX.foREVer]

Thanks for replying bro. Another thing I wanted to ask is How to turn pointers red? I tried to install an LED in the pointers but failed...
now it is difficult to see the speed etc easily. Please if you can tell me a solution because I removed the genuine yellow color from all the pointers

Thanks a lot!

[aftababc]

Yaaar bhai ek masla ho gya hai.. main nay meter khola tha aur pata nae Fuel aur Temperature ka kia system hai wo garrbarr ho gya hai.. aap nay in dono gauges ko wapis fix kaisay kia tha? Please help yaar

CHECK THIS
https://www.pakwheels.com/forums/electrical-wiring-battery-lights/216057-khyber-speeed-ooooometer

[jagger]

I un-assembled the fuel guage by opening the nuts at the back due to which the whole guage (opened) was in my hand and i didn't know what to do. I got it assembled back perfectly but now the calibration of the fuel guage & speedo pointer both are not properly calibrated.

Speedo shows 0 on 20, 40 on 60, 80 on 100 etc
and fuel is empty when the pointer is still above E -_-

keep the distance of needle in you mind i mean if the needle is on 20 but actual position is zero. disconnect the needle and fix it again to the zero!!! hope tht works

[jagger]

Thanks for replying bro. Another thing I wanted to ask is How to turn pointers red? I tried to install an LED in the pointers but failed...
now it is difficult to see the speed etc easily. Please if you can tell me a solution because I removed the genuine yellow color from all the pointers

Thanks a lot!

the led needles are available in kabariyas shop no idea about rwp.. but i get these needles from bilal gunj lahore.. solution to yehi he ya to buy new needles or color the old ones

[AsevenX.foREVer]

thanks a lot for replying sir. Needles to ly loon ga Sultan k khoo sy but mujhay ek picture chahiye thi jis may Khyber ka meter original position may ho yaani k gaari start na ho off ho aur us ki sab needles original position may hon agar aap k pas ho to share ker dain warna no problem at all. You have already been very kind to reply to my questions.

Best Regards.

[muddasir5022]

Some time ago , i also made it for my Khyber , Plz hAve a look

[pwuser153080594389]

From where u buy these bulbs and board. Kindly guide me