ECU problem of Lancer 1.3L (M/T) GL 2005 model

[babarhashmi]

firstly there is no error code for ECU, its either dead or working, the error codes are for the attached sensors and other input signals like A/C or engine start. I strongly suggest you stay away from this car, as whoever is working on it is busy destroying it, you might need to repair/correct whatever has been nitto taped etc.

u were rite xulfiqar bhai
the problem was not resolved even after repair n he wants to buy used card frm shershah, v were not satisfied n still unable 2 figure out the actual problem neways deal is canceled he'll return the advance not interested 2 buy a experimental car

[babarhashmi]

Yes exactly

Even if the issue resolved - the wiring diagram will be completely changed for sure.

thanks bro although the deal is cancelled but ur comments r valuable 4 me n contributed in my knowledge.

[adnshah]

I have a Lancer 2005 GLX Manual transmission and that has an immobilizer on it. I am looking to change the ECU aswell, when i got the car it had a repair already been done on the ECu. I got sherwanis advice and they said that the ecu is throwing a little more power then it should. due to that cng doesnt work properly and coils burst.

its a 1300cc GLX with an immobilizer, now I know some one who is giving me an ECU from a 2000cc mitsubishi engine and claims it will work as the one i have. I checked on the part num on my ecy and was MN1310x1 so im not sure if the other one is the same.

Does any body know if the ecu from the 2.0L mitsu engine would match my 1.3L engine??

[Xulfiqar]

I got sherwanis advice and they said that the ecu is throwing a little more power then it should. due to that cng doesnt work properly and coils burst.

What was the service advisor smoking when he told you this?

[ahmedshaikhani]

Hahahaha these ustaads are really ustaads and people are so pleased with them and then in the end they ruin their car. First of all if it's CEL of Crank Angle Sensor then your car won't start. Secondly 4G13 in Lancer are specifically made for Pakistan and Indonesia it's not easy to find a ecu of this version. But the solution is people in Shershah got 4G15 same as 4G13, a bit of work in wiring is needed if you use 4G15 ecu that's what I remember.

[adnshah]

the cars is running alot of vibrations and 3 cylinders are operational. I got have the genuine 4g13 ecu. problem now is the immobilizer wouldnt accept the new ecu, what do i do?

[shazadp]

Lancer GLX 1.3, 2005, ECU problem, need help. Any good electrician in Karachi?

[sohailkhanhattar]

Bhai mery sath same problem hay kia solution hay?