Engine Swap in Nissan Sunny 1991 (B13)

[IsbCap]

@star2 brother dont worry no one is doomed unless I am gone I had hooked it up several time's back in 2009 in my friend's car so dont worry I am here no one is going to be doomed and plus one thing the picture @ isbcaps showed is much more intelligent emmision controller inside it so I am here dont worry just do what I say or pay a visit to me for breif detail's.

Alhamdullillah, its running fine enough with good consumption, no startup probs, idling well, speeding well. So I'm really not doomed, rather happy

Btw, the ECU i'm having is QG one or GA one?

[IsbCap]

brother first I tought that you are intelligent and had some experince with the Ecu management Now by this statement of your's I am assuming some thing !!!!!!!! interesting so by the no I had showed him the right path in the whole pinout sequence. One person with the brain's can identify it simply by looking at the sequence of the center of the pin's .

Farrukh bro got lot's of experience. No offense and nothing bad regarding his query about pinout. Cheers

[atta1111]

This post was flagged by the community and is temporarily hidden.

[atta1111]

This post was flagged by the community and is temporarily hidden.

[atta1111]

This post was flagged by the community and is temporarily hidden.

[IsbCap]

it's from the almera tino (V10) chasis 2005 model and see the configuration of the pinout's in the middle explain every thing ok I am explaining it in detail ok so read it carefully ok brother.

Here is the pic of my ECU pinout (which seems exactly the one @star2 showed, and different from the one you showed)

[atta1111]

This post was flagged by the community and is temporarily hidden.

[atta1111]

This post was flagged by the community and is temporarily hidden.

[star2]

@atta1111

It is great brother. If you have a pinout for this and if you know the wiring for AC and fuel pump relay and power steering pressure switch and others, do charge some $$$ from @isbcap and do that for him.... and send the link for that pinout in pdf complete to my inbox. Thanks.

[star2]

ok brother just read it carefully and compare the pinout's no and if you misunderstood any thing just ask me by the pinout no ok the
fan relay is no 13 one ok I had encircled it in white mark ok

lol brother you are a bit wrong here...... The ECU you are showing has four bars of pins on the extreme right and left and @isbcap ECU has three bars of pins on extreme right and left and more over the pinout numbers for both of them are different

[star2]

have a look and observe.....

[star2]

so @isbcap you are doomed as I said lolxxxxxxxxxxxxxx

[IsbCap]

@atta1111

It is great brother. If you have a pinout for this and if you know the wiring for AC and fuel pump relay and power steering pressure switch and others, do charge some $$$ from @IsbCap and do that for him.... and send the link for that pinout in pdf complete to my inbox. Thanks.

Hey, I was curious why were you labeling it "doomed" if i had this ECU pinout, which I actually have. Have been surfing the internet since then, and found Guncha's russian labelled pinout on a West Indies website

[IsbCap]

so @IsbCap you are doomed as I said lolxxxxxxxxxxxxxx

And it was a relief to find out that I didn't get something fishy :). JDMs come with this three row configuration. US, UKDM, AUS ones are 4 row ECUs

[star2]

And it was a relief to find out that I didn't get something fishy :). JDMs come with this three row configuration. US, UKDM, AUS ones are 4 row ECUs

you are having a false relief lol i am could not stop laughing what the mess is becoming this thread... @spectra was right, you tell white, poster understands black

[IsbCap]

you are having a false relief lol i am could not stop laughing what the mess is becoming this thread... @spectra was right, you tell white, poster understands black

You should be hired for some suspense series, lol. Plz tell what's wrong with it?

[star2]

You should be hired for some suspense series, lol. Plz tell what's wrong with it?

yaar actually this is the ECU type we are searching ECU pinout for very long time on internet and still no success.......

[atta1111]

This post was flagged by the community and is temporarily hidden.

[star2]

Self Edit

[star2]

Self Edit