Engine Swap in Nissan Sunny 1991 (B13)

[star2]

no problem I can arrange the training personally for you btw I got my training compleated from Malaysia in november last year..

When I came to your shop two months back, then you did not tell me about any such thing. You and your father were talking about some payment to Toyota Company for "all the data they got" around 6-7 lakh or something, I did not remember that actually now. Nothing was going on in case of Nissan by then.

?

Confusing things ?

Anyways, it is all related to you brother, and I do not have anything to do with it. Good luck to you as well. and yeah, keep up the good work.

For me, you did not provide me that 3-row ECU wiring diagram, which you were claiming three months back that you have. So, you have not done what you said many times. If it is "for sale" you should also tell clearly that diagram is "for sale only". Why giving false acquisitions that you have something, which you don't ? This is my only issue with you brother.

[star2]

@isbcap

No offense taken as well :).

Though, I think I have a right to say that I warned you about these wrongdoings a lot earlier, actually on the time of swap that you have to do wiring and other stuffs be it at this point or any point.

And Yes, in past 4 hard years with Nissan engines, I got to experience that when things mess up due to bad wiring, Nissan are very difficult to handle and going to correct wiring at that time sometimes don't help.

[IsbCap]

@IsbCap

No offense taken as well :).

Though, I think I have a right to say that I warned you about these wrongdoings a lot earlier, actually on the time of swap that you have to do wiring and other stuffs be it at this point or any point.

And Yes, in past 4 hard years with Nissan engines, I got to experience that when things mess up due to bad wiring, Nissan are very difficult to handle and going to correct wiring at that time sometimes don't help.

3-row ECU diagram??? Let me finish it and I'll make a nice excel sheet for pinout and upload on these forums.

Difficult to handle? Well, at this stage, I do believe I got things perfectly under control. And I also believe, if UET Taxila didn't have completely retarded heads, my Electrical engineering holds some weight whenever I'm willing to use it

[IsbCap]

Right now I'm using that Russian diagram and matching it with resembling Pinouts for 2001 Nissan Almera QG. And I'm not finding establishing 1-1 relation too tough at the moment...!!!

[star2]

3-row ECU diagram??? Let me finish it and I'll make a nice excel sheet for pinout and upload on these forums.

Difficult to handle? Well, at this stage, I do believe I got things perfectly under control. And I also believe, if UET Taxila didn't have completely retarded heads, my Electrical engineering holds some weight whenever I'm willing to use it

Nah!! did not need that diagram from the day-1.

Just reminding our brother Mr Atta that he had to "share" it here as he says he wants to help out people. I never saw that "share" from him.

Already have wished you luck :).

And you know, pakwheels is a very time-wasting web-site and nowadays I have absolutely no time to waste (Just Kidding)

[spectra]

@isbcap

Sending you my contact details in PM. Please meet me on saturday or sunday. I will hand over the document i have. It is for Almera N16 but helpful in diagnosis and procedures for sure. I have not gone wrong so far in maintaining my car with help from this document.

[spectra]

lollzzzzzzzzzzzzzzzzzzzzzzzzzzz you know haji saab I mean Saqib Bhai. bulaaon un kooo janab hahahahaaa

You just cannot keep minding your own business. It is unfrtunate of me to get to know you and read these cheap jokes you thorw around. Please rafrain from using my name around like this. I wont mind sharing actual results and repeated visits of the cars you worked on and let everyone know the reality of the tall calims you make over here. It is a small world especially Islamabad and even smaller is our telecom industry for which i work and people with common interestes get to know each other rather fast. I am seriously offended with this cheap joke of yours which was completely uncalled for and unwanted.

[atta1111]

This post was flagged by the community and is temporarily hidden.

[atta1111]

This post was flagged by the community and is temporarily hidden.

[atta1111]

This post was flagged by the community and is temporarily hidden.

[spectra]

I am not liable to give you an explanation. Just do what you do without dragging me in any way. I hope it is clear. And I gave you clear hints about how I know who but u want to assume it yourself. You are free to do that. What me and mustafeez do with each other is none of your business nor do you have any right to throw mud around.

Sent from my HUAWEI G610-U20 using PW Forums mobile app

[star2]

our meeting had a limited time back then we cannot discuss on any thing. Plus you didnt either asked me to provide the diagram's and pinout's for the 3 row ecu. the toyota thing was different you are alway's confused about the thing's .. As per the diagram and pinout related thing I still had it And already wired up the Engine of Sarmadz nissan if I dont had the diagram how could I wire his vehicle properly....... Lad I dont sale anything. I can share the thing's to those who work's with their bare hand's and prove them self not like taking help from technision's and sit and command every thing else......

Yeah right, I am confused, and you are not confused, when asked pin from a 3-row ECU, you post diagram of a 4-row ECU. WoW

[star2]

@atta1111

Atta bhai, leave all this, just please elaborate this point that you mentioned that Nissan Co. Japan are not capable of fine tuning each engine and so they leave room for tuning it by the extraordinary tuners like your highness.

Secondly, would you care to share that what will you tune in the first place in a 128 hp QG18 which is meant for a sedan and meant for economy ? Do you think, this engine cannot be tuned without the so-called Consult 4 and requiring a tuner like your highness? Are Nissan Rawalpindi not able to tune out according to your taste with their pathetic Consult-II ? or are the incompetent and only you can tune it and all the Nissan Sunny's that are being sold after 2005 are standing in the Ternol Pathak ? waiting for you to get them tuned ? Can you enlighten me ?

[IsbCap]

@IsbCap

Sending you my contact details in PM. Please meet me on saturday or sunday. I will hand over the document i have. It is for Almera N16 but helpful in diagnosis and procedures for sure. I have not gone wrong so far in maintaining my car with help from this document.

Thanks. Already have the document with me, plus B15 manuals, B13 manuals and so many others

Will surely ping you for help if stuck anywhere.

[margallar]

Lolz everyone is misguided while mr atta111 is always right.

Btw mr atta says he will upload the damn pinout tomorrow for the past few months. Unfortunately he always gets busy or the document needs conversion to excel, you guys should understand his majboori

[atta1111]

This post was flagged by the community and is temporarily hidden.

[atta1111]

This post was flagged by the community and is temporarily hidden.

[star2]

ahhaaann yaar atleast some one on my side I already had given the pinout's to the fellow member residing in Sahiwal with the promise not to reveal pinout here on PW I handed over the document's to him by meeting him sahiwal back in january MashaAllah he had worked on his vehicle with his own hand's appreciate his work and his promise as well..........................

sorry yaar, cannot read this long of a post, but certainly can answer this one.

Atta bhai, what is so important in that diagram that you do not want to reveal it ?

What would happen if he reveals it ?

Maybe one or two guys in the future would get benefit of that and that's it ?

At least I'm not interested in QG18 anymore, so I don't need it.

I'm trying to find out some missing parts for QR25DE, so yeah, you can help me out there, but I'll surely not let you change its "MAP"

and please, stop this "Haji Sb" bUll$hit. @spectra is a respected member here and I think you should acknowledge that as well. Plus, he already has given you appropriate warning. So, I suggest you avoid doing that.

[star2]

@atta1111

"Second every manufacturer in our case nissan is not capble to tune and optimize every single vehicle because they dont know the condition's terrain"

yeah, a multi-million dollar company really don't know which product is going where which is manufactured in its company.

atta bhai, Nissan Muridke ki company nai hey key they don't know in which part of the world and in which atmosphere they are sending their cars. That is why, QG18DE even comes in so much variations, because they are built for different terrains, atmospheres, as well as different conditions. @xulfiqar bhai says right "screw those engineers that design engine" lol. You talk so sense-less. I did not want to say this sentence since long time, but you have the gutts to let me say it today .... Please, leave this meaningless behas. You are not convincing me, it is bullying.

[IsbCap]

I would request everybody to keep a cool head on this thread.

And I certainly don't wanna get the diagram now, as I have almost fully decoded the Russian version myself with the help of Almera N16 manual. Just 10% decoding remaining, which I'll accomplish today, IA.