Spotted this car at Nomi's place back in 2013. It was parked inside the garage so I guess some modifications were in progress.Is it so?
Its because complete swap of my car including custom work is done by Nomi. He has made Stainless Steel air intake pipe which is fitted under front bumper for cold air intake and new Strut Bar as well.
have people done v8 swaps in rx-7?
MASHA ALLAH.. really pleased to c ur project being succesful.. and loved the way u researched before starting ur project.. very few people do so.. drive safe.. (Y)
People Have done it internationally but unfortunately none in Pakistan.
Thanks a lot Sir
There is one rx7 savana swapped with 1uzfe in Lahore.
There's one first gen Rx7 with 1UZFE swap in Karachi as well, I was talking about FD Rx7
Rx-7 of sindh is in rawalpindi nowadays getting some work done .
The sound of that V8 sends shivers down the spine.
What sort of work is being done?any performance upgrades?Sound of the V8s is treat for the ears. Even with the free-flow piping they sound clean, hell loud and vigorous
When i saw it; new wiring was being done. Performance tuning was supposed to be done later. Then detailing etc
Which mechanic is capable of doing this project in lhr. I am so interested in this project Mash Allah your ride is beautiful and I need a serious guide line from you
Thank you.You are the one who sent me a message on FB i assume, Have already replied you there. If you want to ask anything about the project feel free to ask.
that RX-7 savanna is amazing now a days guess 0-100 time ??????
One of the coolant hose is not connected is it me only or others can also notice ? a V-8 engine with one disconnected coolant hose ? does this engine really start & perform GOOD as it is in the picture without overheating ? or is it a TURBO COLD AIR INTAKE ??
ooo my friend you are right from your angle but may be he has taken the pic when some work was going on.. because i am also seeing the two hose clip's one is tighten and one is loosed..............................
Must be around 5-7 seconds.
This picture is from those days when the engine was just put in, u can see many incomplete things even the MAF sensor is not there in the pic.Here's a recent pic.
You are right.
its more less than that with traction control activated without traction control it is just a spining machine will post the video of stat to 80 and then stop.. sooner
I was also experiencing spinning issue until I installed wider rims with 265s at rear.
Hi there. I know its an old thread. but were you able to get the engine/ecu to work together in instrument cluster? or did you have to use guages? any warning lights in the cluster?
Torque monster