FJ40 Owners...Stand Up And Be Counted!

[ShaMaaL]

@noman8ff
good suggestion. will fix on front bumper after some time.

[cyrius]

one thing want to know from all cruiser owners
see the compound thing on front floors is it meant to be there or front floor should be nice and clean like rear floor

[noman8ff]

@noman8ff
good suggestion. will fix on front bumper after some time.

Thank u brother. "Fouadhafeez" has done it with his phantom 40. U can get pics from him or can physically see it as it was done with perfection.

[AdilFJ40]

one thing want to know from all cruiser owners
see the compound thing on front floors is it meant to be there or front floor should be nice and clean like rear floor

The compound is meant to be there. It protects the body from water/moisture. There is a lot more tendency of water/moisture accumulating in the front then rear, so its essential. If its considerably damaged, get it scrapped and lay a new one. There are specialist people who does that kind of job. Ask your denter/painter. Once done, it takes few weeks to completely solidify. Until then don't use mats which are studded from underneath.

[cyrius]

The compound is meant to be there. It protects the body from water/moisture. There is a lot more tendency of water/moisture accumulating in the front then rear, so its essential. If its considerably damaged, get it scrapped and lay a new one. There are specialist people who does that kind of job. Ask your denter/painter. Once done, it takes few weeks to completely solidify. Until then don't use mats which are studded from underneath.

thanks brother one more thing will it be healthy for a 2f engine if i put electronic cdi distributor in stead of point one

[AdilFJ40]

thanks brother one more thing will it be healthy for a 2f engine if i put electronic cdi distributor in stead of point one

You are welcome. When it comes to ignition systems, CDI is definitely better then the conventional distributor. I once converted my Datsun 120Y (1981 B310 engine) to CDI System and it worked very well. It was much better water proof then the conventional one. I don't know which CDI you have or referring to for 2F, but I would definitely recommend you to try. It improves the spark and also the fuel consumption. There are purpose made CDI systems available for 2F engines in US by Man-A-Fre. Check their products on their website under "Man-A-Fre "Lightning Strike" HEI Ignition System".

[cyrius]

You are welcome. When it comes to ignition systems, CDI is definitely better then the conventional distributor. I once converted my Datsun 120Y (1981 B310 engine) to CDI System and it worked very well. It was much better water proof then the conventional one. I don't know which CDI you have or referring to for 2F, but I would definitely recommend you to try. It improves the spark and also the fuel consumption. There are purpose made CDI systems available for 2F engines in US by Man-A-Fre. Check their products on their website under "Man-A-Fre "Lightning Strike" HEI Ignition System".

thanks again actually i got hold of two orignal distributors for 2f both are cdi and one brand new carb
my carb is also very good so i will put cdi only thanks for advise i will upload picture of distributor soon

[samvaid]

Alhamdullilah My Upgraded Ride

Bone Stock FJ40 with 2F powerplant with 4 forward transmission

Upgrades:
Rancho 9000 Front and Rear
6" Shackles Added on Front and rear Rear Springs
Engine tuned, plugs, cables, Point & Voltage regulator changed
BF Goodrich Tyres Mud Terrain T/A 35" with Rims
2" Spacers with reverse studs installed
Aussie Lockers Automatic Diffs Front and Rear installed
Oil Chamber, Brake Cylinders, Oil Pan, Power Steering Gaskets/Seals installed, Alhamdullilah no more leaks
Leaf Springs springed up
Rancho RS5000 Steering Stabilizer

More Pictures and details here. https://www.pakwheels.com/forums/4x4-clubs-off-roaders-suv/211361-my-new-ride-tlc-fj40

[samvaid]

I must state, Aussie lockers rocked !!!!! He'll yeah baby, bring it onnnnnnnn....

though saddened by burst on my front left tire, but BIG THANKS to the support and help of ijcians, we replaced the tire in the middle of the track.

[samvaid]

Double post

[machine]

My Current 40 Series.

Toyota BJ41.
3.7 Ltr - 14B engine.
5Fwd H55f Manual Transmission.
33x12.50x15 Savero MTs with 1inch Spacers.
Safari Snorkel.
Safari Rooftop lights.
Hella Offroad HIDs.
Power Steering.
PowerSteering Oil interCooler.
Mechanical Winch on Front - Warn 8000 at Rear.
Customized Rock Sliders.
ARB Style Front & Rear Bumpers.
Aisin Locking Hubs with Disks.
Front Gabriel Adjustable Shocks.
Rear Shocks are from Monroe.
Monroe Steering Stabilizer.
ARB Fendar Flares.
ARB 6'' lift Shackles.
External Box AC & External Heater.
Electric assisted Seats.
Garmin GPS with solar charger.
Hi lift Jack.
Twin Jerry can rack.
Power Windows.
Audio System.

Wish list

All wheel disk brakes.
Diff Locks.
Roof Rack

[funduro]

[AdilFJ40]

@samvaid: Loved the front spot lights. Looks so decent and beautiful. I will get the same for my Land Cruiser.

[samvaid]

Thank you @adilfj40, a set of 6 more LED lights on the roof is in the cookbooks :), on a custom roof light bar on the soft top.

@samvaid: Loved the front spot lights. Looks so decent and beautiful. I will get the same for my Land Cruiser.

Sent from my Nexus 4 using PW Forums mobile app

[machine]

@samvaid - couple of jerry cans on the back and set to go anywhere

[samvaid]

Got a 75 liter tank and a Jerry can already.

@samvaid - couple of jerry cans on the back and set to go anywhere

Sent from my Nexus 4 using PW Forums mobile app

[razazaz]

here is my ride,

bought this from an auction , year 1982, have been making loads of modifications as time went by,currently it has a 1kz intercooler engine, arb shocks, 5 forward gear , stock tubes.

mudding over the week end

[khalil18]

Aoa, I have original bj 40 1980 model with b engine, it's engine is weak should I overhaul the engine or to replace it with b 3' also th engine is big noisy, what to do please suggest. Thanks

[abdulmoeed11]

Hey !
I Also have one but due to some fincial problems have to sale it!
IF ANY BODY INTRESTED please Call: 0322-5566778.
Thanks and all rides are awesome.

[kambrit]

Nice stuff