Help regarding 1.3 vitz

Toyota

Vitz/Yaris

vitz

Tags: #<Tag:0x007f84d7bb3830>

enZo1 (enzo1) 2016-01-21 16:53:31 +0500 #4

What to do now?

Sent from my iPhone using PW Forums

enZo1 (enzo1) 2016-01-21 16:54:44 +0500 #5

To prevent further damages. I mean the car is going through a very tough condition and i dont know where to start and end.

Sent from my iPhone using PW Forums

enZo1 (enzo1) 2016-01-21 16:54:58 +0500 #6

Sure sir

Sent from my iPhone using PW Forums

hash4u (hash4u) 2016-01-21 17:03:15 +0500 #7

here is his thread link

https://www.pakwheels.com/forums/mechanical-electrical/184443-mayday-transmission-oil-leaking-2

makes sense....
the wise guy overfilled the oil

enZo1 (enzo1) 2016-01-21 17:05:47 +0500 #8

Sir can you message me? Here or anywhere else?

Sent from my iPhone using PW Forums

Marschall (Marschall) 2016-01-21 17:21:53 +0500 #9

not a big issue though go to toyota rawal flush it get the seals changed and use the original gasket or plenty of sealent ,let it dry for 24hrs and your good to go hopefully .my cell no. 0 3 3 3 575 1783

enZo1 (enzo1) 2016-01-21 17:30:54 +0500 #10

Check your mobile sir i just texted.

Sent from my iPhone using PW Forums

salmanrasheedpsh (salmanrasheedpsh) 2016-01-21 17:39:10 +0500 #11

is it 1st gen vitz or 2nd,3rd gen ?

enZo1 (enzo1) 2016-01-21 21:51:54 +0500 #12

2009 vitz 1.3 brother

Sent from my iPhone using PW Forums

rajaatta (Raja Atta) 2016-01-22 00:00:12 +0500 #13

enZo1;5001641:

Aoa pakwheelers
My little brother got a vitz for himself and went out to get a griding sound checked coming from the engine.
Later he ended up being disclosed with burnt transmission oil and he planned to change it without consultation. The previous used oil wasnt cvt and was atf most probably. The car had no issue whatsoever for a day. Later after the oil change, he told that the filter had also been cleaned by petrol. Thank God no major damage had been caused by then.
The next day i asked about the oils he used and i got to know that he replaced it with dexron III of caltex.
I asked him to get rid of it immediately and go for the real cvt oil. And then came the twist after the oil being replaced with zic cvtf oil. The transmission started to leak and drained the oil completely. After that they called the mechanic and installed the Dexron III again and the car was good to go. And now i asked him to park the car and i will take the car to toyota rawal myself to get it fixed.
I am not sure what damage has been done or how to solve this.
Experts? Pleasee guide me i neec urgent help.

Sent from my iPhone using PW Forums

Get the vehicle diagnosed first analyze the shifting patterns along with keeping an eye on Transmission Fluid Temperature. And get the Oil Pressure Checked asap it will determine what kind of condition actually the transmission is in. For more details you can contact me at 0300-5220091

Thinking (Thinking) 2016-01-22 01:28:24 +0500 #14

brother you can get further help from my thread. i have 1.3 vitz as well and i got its TX oil changed too.

You can have the pictorial view of the correct oil and changing method in the thread. hope it helps.

https://www.pakwheels.com/forums/vitz-yaris/246868-got-vitz-al-hamd-u-lillah

enZo1 (enzo1) 2016-01-22 12:41:48 +0500 #15

I did get the oil changed and the people at toyota rawa say the car is out of danger. Well uptill now i did learn that any japanese vehicle isnt even supposed to be near any road side mechanic. I did get to learn the hard way this time. Per Alhamdulillah not much damage had been done.
Ive wasted out budget for this month on this car. Is it okay if i wait for someone for other work?

Sent from my iPhone using PW Forums

enZo1 (enzo1) 2016-01-22 12:42:52 +0500 #16

Oil change has been done sir. I am waiting for the next month so that i will get another budget for all the work of the transmission

Sent from my iPhone using PW Forums

rajaatta (Raja Atta) 2016-01-22 13:32:05 +0500 #17

get it diagnosed for the ensurance of the safety of the transmission... The TOYOTA FOOLS INDEED HAD NOT DONE THE SCAN JOB BEFORE AND AFTER SERVICING AND ALSO DID NOT DO ANT OIL PRESSURE CALIBRATION THROUGH SCAN EQUIPMENT.................. THEY HAD JUST SAYED IT IS OKAY BY ILM E GHAIB NOT BY ANY SCAN JOB THOSE DUMB BA&TERDS.

enZo1 (enzo1) 2016-01-22 16:00:55 +0500 #18

Sir i am having a heart attack already. What now? I mean i am speechless.
Will i be able to last atleast a month without bigger damage? Or what?

Sent from my iPhone using PW Forums

sohelahmed (emi) 2016-01-22 16:37:07 +0500 #19

i would recommend consultation with ata bhai, he is an expert and a wonderful person...

enZo1 (enzo1) 2016-01-22 16:41:46 +0500 #20

Agreed one of the most well aware persons i have come across in a long time.

Sent from my iPhone using PW Forums

chinyoti (Murtaza Shahid) 2016-01-22 17:32:24 +0500 #21

Y are we using different CVT oils on the first place? Why not Toyota CVT?

enZo1 (enzo1) 2016-01-23 02:29:07 +0500 #22

I learned the hard way. But yes ab toh toyota ka cvt he asli cheez hai.

Sent from my iPhone using PW Forums

enZo1 (enzo1) 2016-01-25 13:52:41 +0500 #23

Update. Went to our fellow pakwheeler Raja Atta today.
Got the transmission valves, transmission oil filter cleaned. The oil pressure was extremely low and the oil temperatures were extremely high.
The engine has many weird noises Alhamdulillah uptill now most have faded away. Hands down to Atta bhai.
He surely is an expert in his feild Ma Shaa Allah.

Sent from my iPhone using PW Forums