Road tested and time proven, V-12 amplifiers with their "no shut down" design keep playing when you need them the most. The Audio Quality MOSFETS and Subsonic Filter restore power and produce killer, tight crisp bass. They're also Bass Engine Ready meaning they can handle the juiced signal from an Alpine Bass Engine Equipped head unit. 
2/1 Channel Operation
Adjustable Crossover (LP)
Auto Overcurrent Protection
Bass EQ Circuit
Bass Engine Ready
DC Straight Design
DC-DC PWM Power Supply
Discrete Pre-Amp Stage
Gold Plated RCA Input Connectors
Input Mode Selector Switch
MOSFET Final Outputs
MOSFET Power Supply
MultiMode
One side Terminal Layout
Phase Selector
Dividing Network : 30Hz-200Hz HP(12dB/oct), LP(24dB/oct)
Foot Print (WxHxD)in : 10-5/8O x 11O x 2-3/8O
Foot Print (WxHxD)mm : 270mm x 280mm x 60mm
Frequency Reponse : 10Hz - 50kHz (+0, - 1dB)
Heat Sink (WxHxD)in : 10-5/8O x 10-1/4O x 2-3/8O
Heat Sink (WxHxD)mm : 270mm x 260mm x 60mm
Input Impedance : 10k ohm
Input Sensitivity (for rated power) : 200mV ~ 4.0V
Power Requirements : 14.4V DC (11V to 16V)
Signal to Noise (S/N) : 100BA (referenced to rated power)
Slew Factor : greater than 5
Speaker Impedance : 4 or 2 ohms(stereo), 4 ohms(bridged)
MAX Power (at 14.4V,EIAJ)
- Bridged 4 ohms : 600W x 1
- Per channel into 4 ohms : 225W x 2
RMS Power (at 12V,20Hz-20kHz)
- Bridged 4 ohms : 240W x 1 (0.3% THD)
- Per channel into 2 ohms : 120W x 2 (0.3% THD)
- Per channel into 4 ohms : 70W x 2 (0.08%THD)
RMS Power (at 14.4V,20Hz-20kHz)
- Bridged 4 ohms : 340W x 1 (0.3% THD)
- Per channel into 2 ohms : 170W x 2 (0.03% THD)
- Per channel into 4 ohms : 100W x 2 (0.03% THD
<img src="//fcache1.pakwheels.com/original/4X/1/d/c/1dcf7b3969ae66fa64cf87f521fa4c799d075cdd.jpg" width="666" height="500"><br/>
