Honda City Fan Club

[bewareofdevilz]

dont use regular grease to service the brake caliper, you are supposed to apply antisieze or moly paste on the back of the pads to prevent squeal and use silicone grease on the sliders. Using petroleum grease on the sliders will destroy the little O rings on them and cause rust as water will enter it.

Using it as antisqueal will cause the grease to melt and contaminate the pad material.

Thanks for this info mate, I also saw a lot of rust on the top round edges of the Disk itself, as its exposed to water & air maybe, is there anything we can do about it ? ill share some pix soon

[Xulfiqar]

dont worry about that rust or water - the disc gets super hot 200C easily - all water is steamed off instantly. If you however dont like how the way it looks - you can use some extreme temperature paint for it. But I personally wouldnt bother.

[yawar538]

A recent one I took in my Aspire. You can use it in the title, thread, will look good

Honda City speedometer by Yawar Masood, on Flickr

[sheikh_wah]

Yesterday I got the break/disk pads changed for my City iDSI. I have been using Nissin brand. This time I purchased it for Rs 2300/- whereas 4 wheels' break service was charged Rs. 300/-. Previous disk pads lasted for 40,000+ KMs.

[mkkd]

please share petrol filter and labour rate of honda city 2007

Sent from my LT18i using PW Forums mobile app

[sk_020]

Yesterday I got the break/disk pads changed for my City iDSI. I have been using Nissin brand. This time I purchased it for Rs 2300/- whereas 4 wheels' break service was charged Rs. 300/-. Previous disk pads lasted for 40,000+ KMs.

Shop name from where you bought brake pads please.

[atifkh74]

Friends, can anypne tell me the exact engine oil capacity of Honda City 2008. I have recently bought this city and yesterday I went to get its oil changed. The guy there told me that we will pour full 4 liter oil in the engine. I have read somewhere on the PW, that city has engine oil capacity of 3.7 lts. Please confirm this.
And also about the oil dipstick, there are two holes in it. where the oil level should reside? . Should it touch the upper hole or it should remain between the two holes. pls help. Thanks

[Xaryab]

Requesting a quick reply.
I've got honda city 2009. Would yokohama a drive in size 185, 65 r 15 be good choice.
I've been using dunlop 195 65 r 15, that didn't feel good. Plus I think they were a bit too wide. Your suggestions please.

Sent from my GT-P3110 using Tapatalk 4 Beta

[mkkd]

Friends, can anypne tell me the exact engine oil capacity of Honda City 2008. I have recently bought this city and yesterday I went to get its oil changed. The guy there told me that we will pour full 4 liter oil in the engine. I have read somewhere on the PW, that city has engine oil capacity of 3.7 lts. Please confirm this.
And also about the oil dipstick, there are two holes in it. where the oil level should reside? . Should it touch the upper hole or it should remain between the two holes. pls help. Thanks

may toe complet 4lit engine oil dal ta hoe

Sent from my LT18i using PW Forums mobile app

[sheikh_wah]

Shop name from where you bought brake pads please.

Baig Autos in G-10 Near 'Yasir Khair ul Wara' and 'Japan Car AC'

[sheikh_wah]

Friends, can anypne tell me the exact engine oil capacity of Honda City 2008. I have recently bought this city and yesterday I went to get its oil changed. The guy there told me that we will pour full 4 liter oil in the engine. I have read somewhere on the PW, that city has engine oil capacity of 3.7 lts. Please confirm this.
And also about the oil dipstick, there are two holes in it. where the oil level should reside? . Should it touch the upper hole or it should remain between the two holes. pls help. Thanks

I can confirm that 3.7 liters is the capacity of iDSI model but don't know about next version. Oil level should be touhing the upper hole but better not to cross it. If it's slightly lower than upper hole, even then its ok and has no issues.

[sheikh_wah]

Requesting a quick reply.
I've got honda city 2009. Would yokohama a drive in size 185, 65 r 15 be good choice.
I've been using dunlop 195 65 r 15, that didn't feel good. Plus I think they were a bit too wide. Your suggestions please.

Sent from my GT-P3110 using Tapatalk 4 Beta

U r right, 195-65-15 is much wider for City and 185 will surely give u better and more comfortable feeling as compare to 195. Yokohama is better than Dunlop but expensive too.

[manii009]

i am planning to buy a honda city exis model 2000. or should i go for exi 1999 i am confused.. what will be the major price difference

[fahad_reloaded]

[fawadakbarkhan]

@fahad_reloaded

Bhai jee aapki car different aspects main ham se aagay tou thi he, ab aap safai main bhi number lay gye hain, kuj saaday waastay v chor dyo paa jee...

Rear left light looks bit Seems like the seal has gone bad and the dirt has been entering it. I'll talk to you over the phone soon. And oh, still no OEM wheels and caps? I thought you got them a long time back?

Btw you still haven't let the cat out of the bag.... whats next? (H)

[fahad_reloaded]

Chadoo yaar jaan dayo, aap ki nigaah hy jo aisaa dekh rahi hy werna hum kis qabil hain. Actually, car is now for sale lets c billi kab bahir aati hy

[manii009]

shall i go for exi or exis 99 or 2000 model.. what is the major difference cant make my mind

[coolsmart]

Engine revitalized...

cold start

[coolsmart]

engine sound just after cool temp indicator has gone

[a_n_memon88]

Engine revitalized...

cold start

What have you done in revitalization. Is it like hair revitalization in shampoo adds