Honda Civic 7th Gen. Fan Club

[khjodat1]

But sometime idle speed need manual adjustment. Few years back my honda civic 2006 exi engine started to vibrate vigorously as idle speed dropped quite low. I got it checked from Abid tuning center Faisal Town and they first tuned engine and even then found idle speed not coming up to normal. So they adjusted a small screw near throttle body and afterward idle speed became normal.

[AMMAR-BALOUCH]

got all bushes Replaced week ago,,,, HOW would i know my car Had those adjustment Availabe? or need widening of bolts ? plzzz if u can ellaborate is that adjustment available in 2005 Exi or i need to visit mechanic as also recomended by Alligment wala

[HellsGuardian]

As far as i know, the adjustment is available. If you are in lahore, try going to ishaq wheel alignment walton road.
If in islamabad, try german wheel alignment blue area, it is next to japan tyres.
Wherever you go, insist to see the readings measurement by computer and then after adjustment ask them to show again the readings measured by computer. All alignment guys sometime dodge the customer by doing alignment by their "andaza" to save time.

[AMMAR-BALOUCH]

a.s Alhamdulliah and thanks to all you < Alligment aur camber ka masla hal ho gia ha,,.... Aik Question ha App logon sa,.......... Can duel fuction Bulbs be intalled in Both beams of Double beam Headlight

for reference Civic 2002 -2004 Single beam headlight with duel fuction bulb
Civic 2004-2006 Double beam headlight with Separate bulbs for high beam and low
beam
question yeh ha ka single bulb walie civic ki tarah is ma be Dono Bulb duel fuction wala install kr dia jain taka Both beam low par be aur high par kaam krein?

yeh pta ha ka wiring aur connectons to dene parein ga but possibe ha?

Will it be possible and effective

[danishvohra2006]

can anyone help regarding p0113 (intake air temp circuit high input) error. have been receiving check engine light which some times disappears and then comes back on. I plugged in obd2 and got p1103 error code stored whichUploading... does not clear. is the air intake sensor faulty? if so how much would a new one cost. thanks

[HellsGuardian]

a.s Alhamdulliah and thanks to all you < Alligment aur camber ka masla hal ho gia ha,,.... Aik Question ha App logon sa,.......... Can duel fuction Bulbs be intalled in Both beams of Double beam Headlight

Please share details how you resolved your alignment issues so that others can benefit as well.

Regarding light bulbs, it is possible but i suggest you do not do it. First it will require you to do some modifications to connector and housing as well as both have different types of sockets so not easily interchangeable (it is easy to interchange 9005/9005). Second important factor is that wiring might not support high current as dual filament bulbs are usually high power. Third you somehow need to control four filaments from two switches. If you keep two on all the time then again you risk burning your wiring as well as housing.

I have never done it so i might not be 100% right but common sense tells me not to risk it.

[Chaudhry44]

u can give it a try
1. put h4 in place of high beam hb3/9005 by replacing the hb3 connector and thus making an alteration
2. when u use low light, u have four bulbs to give a good vision, and on high beam u ll have 2 bulbs on low and 2 on high as h4 filaments work separately i.e. either high beam or low beam

Caution: if u put high wattage bulbs of h4, the reflector housings of fl model headlights are smaller and these bulbs would produce more heat which will harm the housing and headlight, it goes for high watt bulbs of hb3 and hb4

[khjodat1]

Since last couple of months I was facing leakage from power steering pump of my honda civic exi 2006. Most of the workshops asked to get it replaced with kabli pump but I always asked them that why I should change it if it can be repaired by replacing seals. Luckily I got a very good mechanic in Johar town lahore who dismantled the pump and changed all the O rings. Now pump is working fine with no leakage. O rings set cost me Rs 350 from AL Rehman autos honda parts shop on Montgomery road 0331 4142365. The pump service mechanic charged me Rs 500 seal changing labor + 500 pump removing & installation labor = Rs 1000. Total cost of repair including parts is Rs 1350. Name of mechanic is Sajawal 0300 4095599. This is his ustad mobile number. Ask ustad yaseen to let you talk with Sajawal.

[HellsGuardian]

labor

Great! Yes PSP can be rebuilt with new seals. Please share his location.

[rajaahmed96]

Yes but to ensure its long life use Honda Genuine PSF, not generic ATF.

[abuzerkhan]

please share location

[AMMAR-BALOUCH]

well got front wheels cambered and alligned (laser alligment) not daga system ,Dont know exactly how he done it but My local area alligment wala has done it. As rear ones are concerned so he too said ka Sir rear waloon ka be camber out ha aur bolts banwana parein ga, So upon his advice for the time being i skiped the rear ones to as they are (camber was just slightyl out)

INSHALLAH as an ethusiat likes my car to be perfect so soon will understand from someones what these bolts system is and how is it Possible that company didnt think that car will need Cambering at some point in life ,,,,TO me it dosent make sense that car needs to be altered to return normal camber

[AMMAR-BALOUCH]

any expert please share Factory camber values for front and rear for Civic 2005

[adilfarid]

This is something everyone needs. Normally allignment guys do zero zero adjustment but honestly thats not right. I would really appreciate if someone can share those values as i hav always felt car slightly tilts towards left. I knw its not only me as i hav confirmed it from many civic users

[khjodat1]

The workshop is located in Shadiwal auto market Johar town.

[HellsGuardian]

Stock values are already shared in this thread. Please see the following post

Btw, get your 7th gen civic aligned as per the following specs. Hoping you have the recommended sized tires installed so that everything is as per the actual / targeted settings, too bad if its running on extra wide big tires because someone sitting on the side informed issay garip aur handaling fit ho jaati ....... these specs won't help your car behaving bonkers if that's the case [image]

@adilfarid This car always pulls slightly to left even if your alignment is perfect. I think someone mentioned once that this is due to difference in length of LHS and RHS axles or something. Sorry don't remember exactly.

[HellsGuardian]

The reason for this is already shared by @khjodat1 .

[adilfarid]

Thanx. Bilal bhai was once telling me about this i had totally forgotten when he had a 7th gen. May be thats the reason, well get it done as already allignment and wheel balancing is due

[khjodat1]

https://goo.gl/maps/zBGsyP9CKijUA4KcA
Location of Yaseen workshop for replacing seals of honda power steering pump.

[abuzerkhan]

Thanks pretty near to my place. will visit soon