Installing Vitz Engine Charade 84

[Damnation6]

Your idle valve may be stuck. Try cleaning the idle valve and see if it helps. Its located on the throttle body. Dont use petrol to clean the idle valve or it'll dry up the grease in the bearing. Clean it with wd40.

About the squeaking from the belt, see if its too worn out or the tension may need to be adjusted.

Sent from my HTC One S using PW Forums mobile app

Ok brother i will upload the pic of idle valve and will clean it with wd-40 btw i have Replaced the Stock Plugs with Toyota Denso iridium K16R-U11 plugs but will upload its pic also ..brother can it Be the Efi fuel pump issue although it was fitted by me and the mechanic and it was working perfectly well.

Secondly this Jerking issue only Arises when the Engine reaches its optimum temperature . in Need of desperate help .

[Damnation6]

All other issues have been sorted out only this Issue Remain need Help @xulfiqar @afnan.bashir @owais_yunus .

[Damnation6]

When car is cold it is in closed loop means works on fixed map. Runs slight rich. When reaches optimum temperature it goes into open mode. Here O2 is the key to manage fuel ratio. Get your electrical stuff sorted out and it will go away

Brother can you tell me Where is O2 sensor located . Which Electrical stuff you are indicating tell in detail. im noob in this regard

[Damnation6]

bump ..up..

[afnan.bashir]

Brother can you tell me Where is O2 sensor located . Which Electrical stuff you are indicating tell in detail. im noob in this regard

Cant find clear picture but its on exhaust manifold. Similar to spark plug but with four wires coming out of it. Usually its cut but look for it at exhaust manifold

[Damnation6]

Cant find clear picture but its on exhaust manifold. Similar to spark plug but with four wires coming out of it. Usually its cut but look for it at exhaust manifold

if i find the O2 sensor what should i do with it should i clean it up or Replace it

[Damnation6]

Brothers @xulfiqar @afnan.bashir @owais_yunus and other Experts can it be an ECU Malfunction ...

[afnan.bashir]

if i find the O2 sensor what should i do with it should i clean it up or Replace it

Mostly their wires are cut. I would suggest to buy a brand new Denso one. No it cant be ECU in first place

[Damnation6]

Mostly their wires are cut. I would suggest to buy a brand new Denso one. No it cant be ECU in first place

ok i sure buy one today and will upload its pic also and will try to find it above the exhaust manifold . few Wires in Engine bay are also left unconnected and they are hanging uselessly i will upload their pic also .

[afnan.bashir]

ok i sure buy one today and will upload its pic also and will try to find it above the exhaust manifold . few Wires in Engine bay are also left unconnected and they are hanging uselessly i will upload their pic also .

I gues you dont have to worry about them They would be of automatic transmission. Did you insalled manual ECU or it is same auto

[Damnation6]

Brothers what are these Connectors and Wires for and Plus That Pipe with Clump ??

[shafqat_ch]

Big One jo Blak color ka hay wo OXygen Sensor Hai or jo Pipe ap kay hath main is kay sath ik Bottle install Hoti hain us main ik pipe fuel tank say aker lgta hai jo vacum dyta hai
Green wala grip meri gari main hai nai
or manifold wala sensor Vitz main sylensr kay pipe main lga hota hai 1Sz fe main mani fold main nai hota

[Damnation6]

Big One jo Blak color ka hay wo OXygen Sensor Hai or jo Pipe ap kay hath main is kay sath ik Bottle install Hoti hain us main ik pipe fuel tank say aker lgta hai jo vacum dyta hai
Green wala grip meri gari main hai nai
or manifold wala sensor Vitz main sylensr kay pipe main lga hota hai 1Sz fe main mani fold main nai hota

thanks bhai jaan Aap ke Paas bhi Charade mein 1SZ-FE hai ..

[shafqat_ch]

Yes 1sz-fe With Manual Transmission IN Charade 88

[Damnation6]

Yes 1sz-fe With Manual Transmission IN Charade 88

Mine is also Manual Transmission btw Which Engine oil and Power steering oil you are using or aap ne 1SZ-FE ki koi Computerized tuning karwai hai ??

[shafqat_ch]

Havoleen Caltex Using in Engine And Toyota,s For Transmission Oil And i did not install power pump bcoz for that i need power gangi that i hav not
but after this engine mujay zarorat nai mehsoos hoi power steering ki kiun k gari ka bhut lite ho gai hai
computrized tuning yahan jhang main hoti nai or 2nd ye jo garain alter hoo un main ye proper ho nai sakti kiun kay bhut c wire hoti hain jo nai lag skti or computer un ka error dyta rahay ga

[Damnation6]

Havoleen Caltex Using in Engine And Toyota,s For Transmission Oil And i did not install power pump bcoz for that i need power gangi that i hav not
but after this engine mujay zarorat nai mehsoos hoi power steering ki kiun k gari ka bhut lite ho gai hai
computrized tuning yahan jhang main hoti nai or 2nd ye jo garain alter hoo un main ye proper ho nai sakti kiun kay bhut c wire hoti hain jo nai lag skti or computer un ka error dyta rahay ga

haan jee Shafqat bhai aap ne sahi kaha . Mein ne apni gari ki Kangi bhi Power karwai hai. acha aik or Baat poochni thi aap se ke aap ki gari ka Clutch pressure wala karwaya hai or hai tu Clutch Pressure Cylinder kis Gari ka Alter ker ke Lagwaya hai aap ke Jawab ka Intezaar rahe ga .

[Damnation6]

@Xulfiqar @Owais_Yunus @afnan.bashir and other Experts thanks all of for your precious time Brothers . The Car is now Set and is working flawlessly . the issue which was Trouble me was not of O2 sensor or of ECU it was of Fuel Pump which is now resolved . will update pics as soon as possible . regards

[afnan.bashir]

@Xulfiqar @Owais_Yunus @afnan.bashir and other Experts thanks all of for your precious time Brothers . The Car is now Set and is working flawlessly . the issue which was Trouble me was not of O2 sensor or of ECU it was of Fuel Pump which is now resolved . will update pics as soon as possible . regards

But connect O2

[Damnation6]

But connect O2

ok Brother will do Tomorrow Insha Allah.