JDM Time - Passo 2010-13

[DrUsmanNawaz]

I should also check brake pads...

Wet sand scratched wheel cup
N spray paint

Thr is no possible way to check remaining brake leather with these steel wheels.so i had to take the tire off. Brakes are almost gone.will go get a new set soon

[us000]

Motorway average on mediocre speed of 100-105 kmph... Without AC... Tyres profile 185...
...
I found Zoom petrol as the best, using for last few months...
...
Oil Liqui Moly 5w30

Sent from my GT-I9300 using PW Forums mobile app

Pretty Nice mileage Usman sb
Keep it Up

I need to discuss with you about importing a Passo, i will inbox you for that.

[zohaib-hassan]

I have Boon 2011 model which is CVT and in next week want to change its transmission oil as it has done 80K KM.

Please suggest CVT oil for Boon, i am going for Liqui Moly Top Tec ATF 1400 so is it ok with Passo and has anybody tried it?

[Naeem284]

A hope to get rid of fuel knocking sound.

[Nabz90]

need genuine brake pads n shoes with 1 wheel cap (lost one while driving...)

[hash4u]

Just changed front discs
1200 rup MK brand
They had so called genuine ones for 4800 rup though

Brakes which came out of the car had "Hitachi" printed on them

Wheel cap is junk yard item i believe

[shahzebm]

Aoa. Just after I washed my car tday now when door open there is no alarm.. Any one knows the problem or solution ? Regards

Sent from my D6503 using Tapatalk

[us000]

Aoa. Just after I washed my car tday now when door open there is no alarm.. Any one knows the problem or solution ? Regards

Sent from my D6503 using Tapatalk

Did you washed the engine or just the body ?
Do all 4 doors having issue or just driver one ?

in any case, let your car dry for 1 day, and probably rhe water anywhere will dry up and your problem will be solved.

And if you know where the door button is located, (on the pillar betwwen front and rear door, it has a black rubber on it) probably ig got water inside.

[shahzebm]

Did you washed the engine or just the body ?
Do all 4 doors having issue or just driver one ?

in any case, let your car dry for 1 day, and probably rhe water anywhere will dry up and your problem will be solved.

And if you know where the door button is located, (on the pillar betwwen front and rear door, it has a black rubber on it) probably ig got water inside.

Only body brother no engine wash. All doors have dis issue.
Even if black switch has pr0blem then why car shows door open signal in meter?
Only beep sound vanished rest everything is fine.
I think u r ryt lts w8 for a day. Thnx for rply

Sent from my D6503 using Tapatalk

[us000]

Only body brother no engine wash. All doors have dis issue.
Even if black switch has pr0blem then why car shows door open signal in meter?
Only beep sound vanished rest everything is fine.
I think u r ryt lts w8 for a day. Thnx for rply

Sent from my D6503 using Tapatalk

Yes, you should wait to let it dry completely. And if you are feeling any other abnormality, then remove the battery -ve wire, just for safety as some other sensor may also get short-circuited due to water, and may damage any other part too.

[shahzebm]

Yes, you should wait to let it dry completely. And if you are feeling any other abnormality, then remove the battery -ve wire, just for safety as some other sensor may also get short-circuited due to water, and may damage any other part too.

Thats good idea I shud remove terminal doesnt it rrstart ecu nd other equipments??

Sent from my D6503 using Tapatalk

[us000]

Only body brother no engine wash. All doors have dis issue.
Even if black switch has pr0blem then why car shows door open signal in meter?
Only beep sound vanished rest everything is fine.
I think u r ryt lts w8 for a day. Thnx for rply

Sent from my D6503 using Tapatalk

But if the "Door Open" sign appears in meter when you open the door. and only beep sound has disappeared.
then there might be some other issue.

have you checked the beep sound while reversing the car, or beep warning sound of car seat belt ?
(as according to my experience, there is only one beep speaker for all the warning sounds.

btw, keep in mind that car only beeps in the following conditions:

• if door is opened but Ignition key is off (NO BEEP)
• if door is opened and ignition is at On point or Key inserted (it Beeps with little delay, like beep beep beep.....)
• if door is open, and Parking or headlight in On (then it Beeeeeepssss.... contionously regardless of the ignition switch)

Also its better to check all the fuses in the dashboard if there is any burnt fuse .

[us000]

Thats good idea I shud remove terminal doesnt it rrstart ecu nd other equipments??

Sent from my D6503 using Tapatalk

YOu can try that, but it may not solve the issue as it seems to be some other issue.
(battery wire can be removed for overnight just for the safety)

(as once when i had Passo 2007, and i serviced the engine compartment (not jet wash, but serviced it wil cloth and cleaners), but somehow water gone into somewhere and its fuel pump starts automatically for some time if if car is locked and parked, So i removed the battery wire overnight, and next day it is all fine as the water is dried up from the engine bay)

[shahzebm]

YOu can try that, but it may not solve the issue as it seems to be some other issue.
(battery wire can be removed for overnight just for the safety)

(as once when i had Passo 2007, and i serviced the engine compartment (not jet wash, but serviced it wil cloth and cleaners), but somehow water gone into somewhere and its fuel pump starts automatically for some time if if car is locked and parked, So i removed the battery wire overnight, and next day it is all fine as the water is dried up from the engine bay)

Thnx for ur response. I just turn car to acc and played the radio of car then pres both lock and unlock buttons on remote for 3 sec.
Problem solved as for now. I just read it somewhere on google.
Lts c how long this solution is viable

Sent from my D6503 using Tapatalk

[us000]

Thnx for ur response. I just turn car to acc and played the radio of car then pres both lock and unlock buttons on remote for 3 sec.
Problem solved as for now. I just read it somewhere on google.
Lts c how long this solution is viable

Sent from my D6503 using Tapatalk

Nice, it should have done some sort of reset.
Thats good that you have solved it.

[Naeem284]

[I]Read somewhere in these forums that it is very useful for JDM cars. Please comment.

[/I]RAIZIN Volt Stabilizer for sale in Lahore - Car Accessory 1941266 | PakWheels

[vcdwonderful]

Mee too 03337226708

Sent from my GT-I9505 using PW Forums mobile app

[us000]

Value Added Information for Passo Owners

[abdullah128]

sir i also got passo 2011 need suggestions for maintenance

[hash4u]

sir i also got passo 2011 need suggestions for maintenance

go through this thread in detail
its loaded with all the information you need