Liana owners & fan club

[Proverbial_Slang]

Something like this?

https://www.daraz.pk/products/025-i506363123.html?spm=a2a0e.searchlist.list.13.37304326IP10x0

https://img.drz.lazcdn.com/static/pk/p/a3b94bd4c34ce1b61cdf175dd2f0a8e8.jpg_2200x2200q80.jpg_.webp

[Xulfiqar]

This is a square head crimp for receptacle ferrules, you will need an F crimper/open barrel crimper

Like this one I picked up from google

Btw, i used a gold plated crimp ferrule, its approved for use in SRS too, so I keep those stocked as its not much more in price and prevents corrossion while having excellent conductivity, final sealing with glue lined heatshrink

[Proverbial_Slang]

Great. Thanks. I think I can source one from Daraz.

[sohikun]

Yea, it's available on daraz. Again, don't forget to check the reviews or over-all seller reviews before placing a order. You can use "buy & save more" store or "Any 3" ~ products from these stores are directly imported from china, hence the 16-20 days delivery time. Some local sellers are selling the same product at a higher price, meh! Best to buy it from a local store or a local daraz seller ~ enjoy!

[Proverbial_Slang]

Thanks. I order regularly from Daraz, and got an elusive hose clamp plier already.

[haseeb.emaratconstru]

I need my Suzuki Liana Rxi 2006 to be converted from hydraulic power steering to electric power steering.
Can someone guide me about the cost and best mechanic in Rawalpindi & Islamabad.

Looking forward for kind responses. Thanks

[muhammadahsankhan94]

i need help. i have liana eminent 2007 switched my direct fan to auto two months ago after that burning smell even on idle. as temperature raises i can smell burning rubber type smell from engine.
if anyone face this issue.

[Proverbial_Slang]

Attach an OBD scanner and check engine temperature. The engine should reach around 88 C at least.

[moeez4942]

If anyone is facing engine losing power for few minutes on cold starts, this can help

[abdulraffay502]

My car feels sluggish and underpowered under 2000RPM, once it reached 2000RPM it runs fine beyond.
When car reaches optimum temperature, it’s little hard to take off from dead stop.

What could be the issue?

[Thinking]

check your plugs, plug wires, fuel filter, throttle body, catcon and coils

[abdulraffay502]

Plugs, coils & wire were changed 2000kms back which didn’t fixed the issue. Catalytic converter was cleaned along with throttle body.
Also, injectors were changed having correct part number (297500-0120) for M15A
I’m being told by some that it could be related to clutch and pressure plates but I need to be sure before opting for such expensive job.

[Thinking]

If its a manual car, you can get the clutch tested by a mechanic

[abdulraffay502]

Yes, it’s a manual variant. Mechanics wants me to get the clutch and pressure plate job done however I want to be sure before undergoing such expensive job.

[dani_kk]

Your location bro?

[abdulraffay502]

It’s Karachi.

[dani_kk]

Looks like a bad clutch bro. The problem statement you mentioned. If you rev it crazily, does it feels like engine is powering up the car but it's not moving properly and speed is less but rpm more. Then forsure clutch

[abdulraffay502]

If I press down the clutch, it sounds like plane taking off but not moving as it should lol. Also, underpowered below 2k rpm, not sure if it’s related to bad clutch.

[Proverbial_Slang]

Definitely sounds like a bad clutch.

[abdulraffay502]

I suspect that if it’s bad clutch because car becomes all fine after 2k rpm and RPM increases gradually. When accelerating after 2k rpm I can feel while driving that car is accelerating as it should.
Its more kind of problem with low end torque and jerk around 1200rpm. Low end torque has little power and becomes worse with AC. Hope I’m explaining it correctly.