Liana owners & fan club

[saboor73]

Can any body tell me how to take the injectors off the engine? I want to do a DIY of cleaning them... Plus anybody know where are the bolts of dashboard located? I think my dash is bit loose and needs to be tightened. And there is also another problem that the left tail lighy has gone black from inside, the silver coating jas gone bad.i went to a repair shop and he said there will be cutting involved to open the light. Should i go for it? Or should i replace it altogther? How much is cost of pair of vurv lights? And i want that liana sports garnish on tail lights and its lip spoiler for boot. Prices please?

How are you planing to clean injector ? Still you need to take of fuel rail for that and removing fuel rail need a bit of effort not properly sealed light can go black opening tail light doesnt require cutting in most cases sport garish with original tails look better than vuru imo

[mfniazi]

Front Control arm (khenchi) k bush new milte hain alag se? Any idea of price also?

Genuine bushes are available. Bought in 700 rupees, but don't remember if this price was for one bush or for the pair.

[saboor73]

Genuine bushes are available. Bought in 700 rupees, but don't remember if this price was for one bush or for the pair.

How's your car going these days?

[abid110]

Genuine bushes are available. Bought in 700 rupees, but don't remember if this price was for one bush or for the pair.

From plaza? And how are they going on?

[cracked]

I saw a video on youtube to clean injectors with carb cleaner. They used a battery and connected injector on and off while spraying carb spray from it. The method illustrated seemed to be easy and results seemed pretty ok. And for light i had it checked from two three shops all said it wont open without cutting. So im thinkin to replace it if pricr is reasonable. And yes that sportd garnish look better than vurv lights

[saboor73]

I saw a video on youtube to clean injectors with carb cleaner. They used a battery and connected injector on and off while spraying carb spray from it. The method illustrated seemed to be easy and results seemed pretty ok. And for light i had it checked from two three shops all said it wont open without cutting. So im thinkin to replace it if pricr is reasonable. And yes that sportd garnish look better than vurv lights

If you are going though of hassle removing fuel rail than ultrasonic cleaning is better imo otherwise add some injector cleaner in fuel tank

[mfniazi]

How's your car going these days?

My car's gasket has recently been replaced once again. This time, the mechanic has used a genuine steel gasket, but mechanic is suggesting for a radiator replacement, too. Perhaps the new one will be installed in coming days. Consequently, I am avoiding to use AC after gasket replacement in order to avoid heating issue. Once radiator is replaced, then I will analyze whether car is overheating with AC or not.

[mfniazi]

From plaza? And how are they going on?

Another mechanic in Shah Faisal Colony bought them for me and they are really good since last 2 months. Before genuine bushes, I tried to put local control arm bushed (Rs.320) and they started making noises within one week.

[abid110]

My car's gasket has recently been replaced once again. This time, the mechanic has used a genuine steel gasket, but mechanic is suggesting for a radiator replacement, too. Perhaps the new one will be installed in coming days. Consequently, I am avoiding to use AC after gasket replacement in order to avoid heating issue. Once radiator is replaced, then I will analyze whether car is overheating with AC or not.

You went to ashfaq again so what did he do? I also never switch on ac of my car due to fear of overheating as gasket has gone three times in my case. For the same matter, my fan is direct and not tstat valve. Atleast car is not overheating at all now. My rad needs a change too.

[abid110]

Another mechanic in Shah Faisal Colony bought them for me and they are really good since last 2 months. Before genuine bushes, I tried to put local control arm bushed (Rs.320) and they started making noises within one week.

We buy genuine bush and they are pressed in the control arm? Is it done this way?

[welcome786]

Seems like Aluminium to me because of the weight difference. Although top and bottom is of plastic. I have read that these things last a couple of years before developing any major leaks. But the price is worth it. I bought mine for only 6500. The "geneaaan" radiator cost was 35K. Let's see how long does it last when used with proper care and frequent coolant changes.

The "geneaaan" radiator cost was 35K.

eyes wide open.

[abid110]

The "geneaaan" radiator cost was 35K.

eyes wide open.

Yup ..i got same quote from a 3s. Shayed Diamond ka bana hota hai

Market me easily available hai for 5-6k

[abid110]

Another mechanic in Shah Faisal Colony bought them for me and they are really good since last 2 months. Before genuine bushes, I tried to put local control arm bushed (Rs.320) and they started making noises within one week.

I got a quote of 2000 for all 4 front bush of control arms from a genuine part dealer at Plaza. He said 2 small bush and 2 larger bush hotay hain liana me

[welcome786]

Yup ..i got same quote from a 3s. Shayed Diamond ka bana hota hai

Market me easily available hai for 5-6k

3S wale to aise hi looten ge, main planning kar raha hn Liana purchase karne ka thora search kar raha hn. kaisi gari hay? aap recommend karte ho?

[abid110]

3S wale to aise hi looten ge, main planning kar raha hn Liana purchase karne ka thora search kar raha hn. kaisi gari hay? aap recommend karte ho?

Recommended only if you buy a clean car with no electronic and suspension issues. Suspension kafi expensive hai and difficult to restore. Electronics thoray complicated hain esp if you going for a ff cng wali car which is highly not recommended by anyone in market as it can only be played by a 3s and they looooot you. If car is with local cng kit, it is fine as in my case. Otherwise its a gem only on petrol. Overall car is manageable, parts are hell expensive in 3s. But local market have all parts available which are of same price as cultus, alto, margalla etc...for any further issue, you can call me or any other karachi member for details

[welcome786]

Recommended only if you buy a clean car with no electronic and suspension issues. Suspension kafi expensive hai and difficult to restore. Electronics thoray complicated hain esp if you going for a ff cng wali car which is highly not recommended by anyone in market as it can only be played by a 3s and they looooot you. If car is with local cng kit, it is fine as in my case. Otherwise its a gem only on petrol. Overall car is manageable, parts are hell expensive in 3s. But local market have all parts available which are of same price as cultus, alto, margalla etc...for any further issue, you can call me or any other karachi member for details

Thanks,

definitely i will go for Only Petrol, one thing more, on petrol how much mileage you got per litter?

[abid110]

Thanks,

definitely i will go for Only Petrol, one thing more, on petrol how much mileage you got per litter?

I dont drive on petrol. But its something around 10/ltr or so.

[welcome786]

I dont drive on petrol. But its something around 10/ltr or so.

thats not a good mileage, i am getting 12km/liter on daewoo 1993 model.

[abid110]

thats not a good mileage, i am getting 12km/liter on daewoo 1993 model.

Other things count in too as my car is rarely used on petrol, air intake is blocked due to cng, maybe not fully tuned on petrol. An owner with full petrol car can tell correctly

[mfniazi]

We buy genuine bush and they are pressed in the control arm? Is it done this way?

He changed the gasket once again last week. Now, radiator needs replacement and it will be done in coming days. I got a quote of 5200 for the radiator. I couldn't found a copper one for liana. Only aluminum ones are available.

Yes, bushes need to be pressed.