Liqui Moly Ceratec

[kamrankhandirector]

where can i get cera tec in lahore?

try https://www.facebook.com/Car-Care-In-Pakistan-776885332439996/?fref=ts

[Eddy5]

rubbish. nothing beats MOBIL 1

[zia1288]

Bringing up this old thread to ask something. My Vitz takes 3.2L engine oil. If I use ceratec in my car's engine, I'll need to pour less engine oil or the same quantity i.e. 3.2L?

@capsat @Xulfiqar @afnan.bashir @SER_GTR @syncview

[capsat]

you need approx 600 ml more of engine oil when filter is replaced.
brand does not matter. - one important thing ... every time you change OIL BRAND, change the oil filter as well.

Bringing up this old thread to ask something. My Vitz takes 3.2L engine oil. If I use ceratec in my car's engine, I'll need to pour less engine oil or the same quantity i.e. 3.2L?

@capsat @Xulfiqar @afnan.bashir @SER_GTR @syncview

[zia1288]

you need approx 600 ml more of engine oil when filter is replaced.
brand does not matter. - one important thing ... every time you change OIL BRAND, change the oil filter as well.

Bringing up this old thread to ask something. My Vitz takes 3.2L engine oil. If I use ceratec in my car's engine, I'll need to pour less engine oil or the same quantity i.e. 3.2L?

@capsat @Xulfiqar @afnan.bashir @SER_GTR @syncview

Sir with Oil filter change the quantity poured in is 3.2L. (I'm not changing engine oil brand). I'll need to pour around 200ml LM Ceratec. SO should I fill 3.0L engine oil or 3.2L?

[capsat]

add 200 ml after 3 liters of fresh oil.

[quote="zia1288, post:285, topic:143233, full:true"]

you need approx 600 ml more of engine oil when filter is replaced.
brand does not matter. - one important thing ... every time you change OIL BRAND, change the oil filter as well.

Bringing up this old thread to ask something. My Vitz takes 3.2L engine oil. If I use ceratec in my car's engine, I'll need to pour less engine oil or the same quantity i.e. 3.2L?

@capsat @Xulfiqar @afnan.bashir @SER_GTR @syncview

Sir with Oil filter change the quantity poured in is 3.2L. (I'm not changing engine oil brand). I'll need to pour around 200ml LM Ceratec. SO should I fill 3.0L engine oil or 3.2L?

[/quote]

[zia1288]

Ok. Ceratec will is said be protecting/staying in engine for 50,000km. So what about the next oil changes? Every time I have to pour 3.0L? (sorry if i'm asking too many questions)

[capsat]

you can delay the oil change 500 kms more then your usual interval , and change the usual brand of choice same grading. Ceratic as lube coating will remain there. you can check detergent quality of ceratec additive at next oil changes.

[quote="zia1288, post:287, topic:143233, full:true"]

Ok. Ceratec will is said be protecting/staying in engine for 50,000km. So what about the next oil changes? Every time I have to pour 3.0L? (sorry if i'm asking too many questions)

[/quote]

[zia1288]

you can delay the oil change 500 kms more then your usual interval , and change the usual brand of choice same grading. Ceratic as lube coating will remain there. you can check detergent quality of ceratec additive at next oil changes.

[quote="zia1288, post:287, topic:143233, full:true"]

Ok. Ceratec will is said be protecting/staying in engine for 50,000km. So what about the next oil changes? Every time I have to pour 3.0L? (sorry if i'm asking too many questions)

[/quote]

The coating will be there, ok. So I'll pour 3.0L on next oil changes too?

[capsat]

measure the drained oil and fill up to whatever quantity is needed.

[quote="zia1288, post:289, topic:143233, full:true"]

you can delay the oil change 500 kms more then your usual interval , and change the usual brand of choice same grading. Ceratic as lube coating will remain there. you can check detergent quality of ceratec additive at next oil changes.

[quote="zia1288, post:287, topic:143233, full:true"]

Ok. Ceratec will is said be protecting/staying in engine for 50,000km. So what about the next oil changes? Every time I have to pour 3.0L? (sorry if i'm asking too many questions)

[/quote]

The coating will be there, ok. So I'll pour 3.0L on next oil changes too?

[/quote]

[zia1288]

measure the drained oil and fill up to whatever quantity is needed.

[quote="zia1288, post:289, topic:143233, full:true"]

you can delay the oil change 500 kms more then your usual interval , and change the usual brand of choice same grading. Ceratic as lube coating will remain there. you can check detergent quality of ceratec additive at next oil changes.

[quote="zia1288, post:287, topic:143233, full:true"]

Ok. Ceratec will is said be protecting/staying in engine for 50,000km. So what about the next oil changes? Every time I have to pour 3.0L? (sorry if i'm asking too many questions)

[/quote]

The coating will be there, ok. So I'll pour 3.0L on next oil changes too?

[/quote]

Thank you sir.

[mohsan87]

Today I asked same question from outlet he said NO. Just pour the additive and it will last for 50,000 kms in engine compartment. No need to add ok every oil change. And it will not drain out with oil as it attached to engine housing inside

[chillwithmanner123]

Add ceratec 300ml
Than pour 2.7L engine oil
Start the car for 5 minutes
Than turn off wait for again 5 minutes
Check the dip-stick level ...if it's low than pour more
Next morning after start the car
Inspect the dip-stick level ... Just

[chillwithmanner123]

2nd oil change ..
Pour 3L engine oii

[engr.usama.malik]

I am so much confused , I have Honda City MT 1.5 Aspire 2016 , i am using Honda 5W-30 grade of oil but i am much of frustrated for changing oil at 5000KM and also Engine does not sound smooth as it should have been.
I have an experience of using liqui molly for Toyota GLI 1.3 automatic and is doing good.
I am interested to change the oil to Special Tec AA 5W-30 (4 Litre) in Honda city 1.5 MT now. What are your recommendations. I am living in Islamabad and most of travelling is on High way. but confused between mileage of 10k or 5k?

[1503]

Change every 5000 km or 06 months, which ever comes earlier

[sheikh_meister]

What's the best place to get a bottle of ceratec in Rawalpindi/Islamabad? What about the price? It is being sold for 4k on daraz and price mentioned on liqui moly Pakistan website is 2500.