Margalla engine swap

[heatblow80]

Anybody..???

[heatblow80]

plzz guyz help me....

[mehrozniazi1]

G15 and G16 can be done..batter then G13b....finding a auto gear box will be tuff...

Plus AWD with 1.6 came..but you have to import it...i dont think so you can find it here and it will cost alot

[Storm]

you can get a 3 speed auto in your car. it was used in the 1L Geo metro in north america & the equivalent Suzuki swift hatch in europe (1990-1994)

[REDZDEVIL]

G15 will do...!!

[Storm]

3) plus i also wanna know about the picture given below:

http://www.cardomain.com/ride/516116
the engine is a G16A (1.6L)

[chinyoti]

i spoted a G15 Baleno (Station Wagon) at my CNG guy it was auto tranny so ur local scrap market is the place to check out you maybe lucky finding one.

The Engine was based on the Local Balenos G13b and seemed exactly the same
unless i read the tickly (engine code seal), same tapet cover, Coils, Airfilter box

So if a Balenos G13 ca go into a margalla then surely the G15 can also fit into in. (i guess) still consult your mechanic.

Because getting a 90s engine (that isnt avalible here) isnt a safe idea specialy if its not local because overhauling it could be a misery.

[Storm]

Because getting a 90s engine (that isnt avalible here) isnt a safe idea specialy if its not local because overhauling it could be a misery.

the G16 came in the vitara as well.

also if all these ricers can find H22's from old prelude then there must be a good source for a decent G16.

[AkbarGr8]

I saw a JDM balenos front cut in shershah a month or two back...the good thing was that it was auto tranny...better to get something like that so you can get all necessary parts for a successful swap..best of luck

[chinyoti]

the G16 came in the vitara as well.

also if all these ricers can find H22's from old prelude then there must be a good source for a decent G16.

oh i didnt that post regarding 1.6 so i just had 1.5 in my mind, as for G16, i guess its the same that was offered in the local Baleno (Gtti)

But the G16 in the picture seems Carby, the one offered locally was a Efi

[heatblow80]

so what should i get..???

a g16 A/T...???

or a g15 A/T...???

and about the 4wd setup...Approximately how much will it cost..

[Storm]

oh i didnt that post regarding 1.6 so i just had 1.5 in my mind, as for G16, i guess its the same that was offered in the local Baleno (Gtti)

But the G16 in the picture seems Carby, the one offered locally was a Efi

G16 is a basic block code, for example the 109hp carby M102 block in my 81 merc is the same block used in the 204hp 190E2.5-16 Evolution. the difference is in the code after the block number (suffix)

[heatblow80]

this is the one i was talking about:

[Storm]

so what should i get..???

a g16 A/T...???

or a g15 A/T...???

and about the 4wd setup...Approximately how much will it cost..

not familiar with the G15 with an auto in your car. but the G16 has been done by suzuki. why do you want 4WD? do note that it'll be hard enough finding an auto with a G16/G15, forget about finding the setup as well as a 4WD conversion,.. the 4WDs never sold well.

[heatblow80]

@ storm thanks man...

plzz confirm me that which engine should i go for..

[heatblow80]

4x4 plan cancelled ..

[abbasaliabbasi]

I have a simple solution, just go import center where all imports are done. There you contact to Takasomi Motors in Tokyo, Japan. Say them to import a brand new G-16b block engine or if not available then ask them for Suzuki Esteem (in Pakistan Suzuki Baleno) engine G-13b block engine. If no other choice then ask for Honda Prelude 1996 engine which is auto-tyranny engine with all supports, it is 2000 cc engine but brother for that you need a lot of cash & custom cash & you need to alter it, without alteration the engine with full chassis cannot be installed. If they have nothing like that just say them "****-off"... =)

My friend also altered Suzuki Cultus 2002 engine with G-16b block engine & now its fully modified & customized & it is running like a new Honda or Toyota, the power is excellent & performance is like "Wow".. It costed him around 1.50k with all supports but that was 2006, I don't know that how much will it cost now..???

[blackandblind]

if u want power and pleasure drive go for G15. u wud find complete swap with auto transmission in shershah for some what 40-45k. which wud include engine, gear, wiring, ECU.
and this wud most probably be distributor less.

[heatblow80]

im confused that which engine should i go for ..???

plzzz confirm..

[heatblow80]

g16a ..????