Mark X Build Log

Toyota

Mark X

build

Tags: #<Tag:0x00000009a62030>

stj174 (stj174) 2014-07-03 03:30:26 +0500 #421

HAHA thanks guys

stj174 (stj174) 2014-07-03 13:37:34 +0500 #422

Update:

Changed the front stage amplification. Got myself Xtant 2200ix. Handcrafted in USA.

Xtant 2200ix SPECIFICATIONS
Frequency Response 5 Hz to 50 kHz +/- 1 dB
Number of Channels 2
Watts per Channel @ 4Ω 2 x 100
Watts per Channel @ 2Ω 2 x 200
Bridged Mono @ 4Ω 1 x 400
Recommended Load (Ω)2 Ω Stereo / > 4Ω Bridged
Distortion (THD) < .04% MEASURED: 20 HZ TO20 KHZ AT RATED POWER, ALL CHANNELS DRIVEN 4Ω
Signal to Noise Ratio > 100 dB MEASURED: A-WEIGHTED IN 20 KHZ NOISE BANDWIDTH @ 1 VOLT SENSITIVITY
Damping Factor > 200 @ 100 Hz with 4Ω load
Input Sensitivity 100 mV to 8.5 V RMS Unbalanced Source 100 mV to 17 V RMS Balanced Source
Input to Line Output Gain 0 dB +/? 20 dB, Selectable in 10 dB steps
On-Board Crossover 18 dB per Octave "Butterworth"
Module Port(s) 1 - Accessory Port
Power Supply Fully Regulated, "Transitional"
Operational Voltage 11 to 15 Volts
Fusing 50 Amp
Warranty Limited 4 year Parts and Labor

Balanced / Floating Input: All "ix" Series amplifiers are supplied with Balanced / Floating inputs. This circuitry helps to eliminate "system noise" associated with "ground-loops"

Pics:

Special thanks to bad cheetah for his ultimate support throughout in product reviews, testing and selection.
Guusstaaa

roms (roms) 2014-07-03 13:51:35 +0500 #423

stj174;4435710:

Update:

Changed the front stage amplification. Got myself Xtant 2200ix. Handcrafted in USA.

Xtant 2200ix SPECIFICATIONS
Frequency Response 5 Hz to 50 kHz +/- 1 dB
Number of Channels 2
Watts per Channel @ 4Ω 2 x 100
Watts per Channel @ 2Ω 2 x 200
Bridged Mono @ 4Ω 1 x 400
Recommended Load (Ω)2 Ω Stereo / > 4Ω Bridged
Distortion (THD) < .04% MEASURED: 20 HZ TO20 KHZ AT RATED POWER, ALL CHANNELS DRIVEN 4Ω
Signal to Noise Ratio > 100 dB MEASURED: A-WEIGHTED IN 20 KHZ NOISE BANDWIDTH @ 1 VOLT SENSITIVITY
Damping Factor > 200 @ 100 Hz with 4Ω load
Input Sensitivity 100 mV to 8.5 V RMS Unbalanced Source 100 mV to 17 V RMS Balanced Source
Input to Line Output Gain 0 dB +/? 20 dB, Selectable in 10 dB steps
On-Board Crossover 18 dB per Octave "Butterworth"
Module Port(s) 1 - Accessory Port
Power Supply Fully Regulated, "Transitional"
Operational Voltage 11 to 15 Volts
Fusing 50 Amp
Warranty Limited 4 year Parts and Labor

Balanced / Floating Input: All "ix" Series amplifiers are supplied with Balanced / Floating inputs. This circuitry helps to eliminate "system noise" associated with "ground-loops"

Pics:

Congrats Nauman bhai. Chuppay rustam niklay aap.
SQ kick in Yo

Sent from my SM-N9005 using Tapatalk

Bad_Cheetah (Bad_Cheetah) 2014-07-03 14:10:38 +0500 #424

Allaaaaa!
Congrats, must sound lovely, demo kab day rahay hein?

yawar538 (yawar538) 2014-07-03 14:39:46 +0500 #425

Woah, some wonderful piece of engineering. Eager to hear your reviews on it.
What drivers do you plan to run on it?
King back with a BANG!

drift222 (drift222) 2014-07-03 15:01:45 +0500 #426

Here it is Ramzan and here Mark X is rising again
Congratulations sir je, demo to banta hai
I m coming lahore on Eid, ll contact u for demo.

rustam54 (rustam) 2014-07-03 15:03:43 +0500 #427

Are you sure that is an amplifier??????????

Looks like an nVidia GeForce to me .

Kidding, I dont know what it is and How it is. Yeh to ab demo se pata chalay ga.

Congratulations on the new comer :).

krieger (krieger) 2014-07-03 17:12:47 +0500 #428

stj174;4435710:

Update:

Changed the front stage amplification. Got myself Xtant 2200ix. Handcrafted in USA.

Xtant 2200ix SPECIFICATIONS
Frequency Response 5 Hz to 50 kHz +/- 1 dB
Number of Channels 2
Watts per Channel @ 4Ω 2 x 100
Watts per Channel @ 2Ω 2 x 200
Bridged Mono @ 4Ω 1 x 400
Recommended Load (Ω)2 Ω Stereo / > 4Ω Bridged
Distortion (THD) < .04% MEASURED: 20 HZ TO20 KHZ AT RATED POWER, ALL CHANNELS DRIVEN 4Ω
Signal to Noise Ratio > 100 dB MEASURED: A-WEIGHTED IN 20 KHZ NOISE BANDWIDTH @ 1 VOLT SENSITIVITY
Damping Factor > 200 @ 100 Hz with 4Ω load
Input Sensitivity 100 mV to 8.5 V RMS Unbalanced Source 100 mV to 17 V RMS Balanced Source
Input to Line Output Gain 0 dB +/? 20 dB, Selectable in 10 dB steps
On-Board Crossover 18 dB per Octave "Butterworth"
Module Port(s) 1 - Accessory Port
Power Supply Fully Regulated, "Transitional"
Operational Voltage 11 to 15 Volts
Fusing 50 Amp
Warranty Limited 4 year Parts and Labor

Balanced / Floating Input: All "ix" Series amplifiers are supplied with Balanced / Floating inputs. This circuitry helps to eliminate "system noise" associated with "ground-loops"

Pics:

Special thanks to bad cheetah for his ultimate support throughout in product reviews, testing and selection.
Guusstaaa

Xtant is one of the best! Enjoy!

DCcoolguy (DCcoolguy) 2014-07-03 17:18:49 +0500 #429

wana try this orchestra some day ! very quality built ! keep it up !

mughal90 (mughal90) 2014-07-03 18:14:53 +0500 #430

Alaaaa purchase nauman bhai.

Sent from my SM-G900F using PW Forums mobile app

umer325 (umer325) 2014-07-03 18:27:04 +0500 #431

stj174;4435710:

Update:

Changed the front stage amplification. Got myself Xtant 2200ix. Handcrafted in USA.

Xtant 2200ix SPECIFICATIONS
Frequency Response 5 Hz to 50 kHz +/- 1 dB
Number of Channels 2
Watts per Channel @ 4Ω 2 x 100
Watts per Channel @ 2Ω 2 x 200
Bridged Mono @ 4Ω 1 x 400
Recommended Load (Ω)2 Ω Stereo / > 4Ω Bridged
Distortion (THD) < .04% MEASURED: 20 HZ TO20 KHZ AT RATED POWER, ALL CHANNELS DRIVEN 4Ω
Signal to Noise Ratio > 100 dB MEASURED: A-WEIGHTED IN 20 KHZ NOISE BANDWIDTH @ 1 VOLT SENSITIVITY
Damping Factor > 200 @ 100 Hz with 4Ω load
Input Sensitivity 100 mV to 8.5 V RMS Unbalanced Source 100 mV to 17 V RMS Balanced Source
Input to Line Output Gain 0 dB +/? 20 dB, Selectable in 10 dB steps
On-Board Crossover 18 dB per Octave "Butterworth"
Module Port(s) 1 - Accessory Port
Power Supply Fully Regulated, "Transitional"
Operational Voltage 11 to 15 Volts
Fusing 50 Amp
Warranty Limited 4 year Parts and Labor

Balanced / Floating Input: All "ix" Series amplifiers are supplied with Balanced / Floating inputs. This circuitry helps to eliminate "system noise" associated with "ground-loops"

Pics:

Special thanks to bad cheetah for his ultimate support throughout in product reviews, testing and selection.
Guusstaaa

Nauman bhai yeh amp aesay nanga ei rehta ay?

Bilalicious (Bilalicious) 2014-07-03 21:13:27 +0500 #432

Good one...an X for the X
XoXo

stj174 (stj174) 2014-07-04 04:59:27 +0500 #433

Thank you Roms bhai

LOL naughty boy Thanks

Thank you Yawar bhai Sir for the time being running this amp full passive with the F1 drivers. Wanted to try the F1s on an amp with American flavor to see how the combo works. Will share my reviews with you guys in a few days, but filhaal..... aayieeennnn!

Thanks Kashif bhai. Looking forwards to meet you when you visit Lahore

Thank you Nauman Bhai. LOL you are right looks like a Nvidia card

Nauman bhai aab to "I" bhee hay "O" bhee hay and aab "X" bhee... aagay aap samhajdar hain

Thanks Sir

Thanks Waqas bhai

Umar bhai you dont like "Amp Corn" ?

Sir thoora wait karain will post some more pics of the amp after i remove the white protective sticker type thing from the amp cover..... shiny shiny

Thanks Bilal bhai too many X in the Mark X

CoLd_FuSiOn (CoLd_FuSiOn) 2014-07-04 05:57:41 +0500 #434

Yeh ab logon k rozay kharab horahe hain, this amp has got some big cohones.American muscle at it's best, the scans have finally got what they deserve.

Caution: Wear a diaper before demoing this X, because you're definitely gonna **** your pants.

Sent from my GT-I9100 using Tapatalk

yawar538 (yawar538) 2014-07-04 07:48:02 +0500 #435

Pardesi Baabu time ON
Just curious, if you have tried F1 drivers on Adcom by any chance

majid1thunder (majid1thunder) 2014-07-04 08:59:50 +0500 #436

waiting for reviews and demo ....

hulk123 (hulk123) 2014-07-04 11:14:30 +0500 #437

Bht allaa

nice to see another high end stuff in pakistan

blacklist1 (blacklist1) 2014-07-04 12:00:14 +0500 #438

So had a chance to listen the X with xtant , music nicely detailed

mid bass was strong and hit so hard with my right leg , still feeling pain lol

thumbs up(y) for Xtant , worthwhile upgrade

roms (roms) 2014-07-04 12:20:27 +0500 #439

That was a trap for you muneeb bhai. Never going back to SPL

Sent from my SM-N9005 using Tapatalk

hulk123 (hulk123) 2014-07-04 12:36:36 +0500 #440

nice , glad to see high end stuff in pakistan