MOC - M151 Owners Club, Pakistan

[Allee_Qazi]

In order to stay clear of the LEAs :S

Correct me if i am wrong but didnt you just got your MUTT Painted ??? i mean before this PRK 1300/- escapade.

[sarmadqureshi]

Correct me if i am wrong but didnt you just got your MUTT Painted ??? i mean before this PRK 1300/- escapade.

Yup, thats what happens when you don't listen to people...... people who have had more experience than you in life. Thus my even stronger belief that there's no short cut to experience.
Well, I learnt the hard way, as usual

[janyl]

Hey Mutt Owners,

Have you ever felt, while driving a Mutt that it was ''about'' to roll over [at sharp turns etc] .

Or the Mutt is mostly stable and cozy and roll over situations are mostly occasional.

[sarmadqureshi]

Hey Mutt Owners,

Have you ever felt, while driving a Mutt that it was ''about'' to roll over [at sharp turns etc] .

Or the Mutt is mostly stable and cozy and roll over situations are mostly occasional.

Having knowing that its prone to roll over at sharp turns, one keeps that in the back of the mind.
Havent felt it though.
A sharp turn on a rough road would surely buckle the rear suspension, sending it into a rollover.

[Janj]

Sam just changed the shade to light Green;)

[Janj]

[Janj]

[sarmadqureshi]

Good show man... I like the color.

[craze]

[QUOTE=Basharatu;2220775]The guy who took FJ for Bodywork & PaintJob has halted the project in the middle, Shah Sb. also got busy in the work and I think intensity towards resto is not what is required to complete the project. He was also confused in the color selection, lets see what A

Hi Guys! I am very much around, but as Basharat said stuck with work. The guys who I gave the task tried to take a short cut "Shahid" at teenhati, my suggession to all do not go near this guys. My FJ is back to golimar, hopping that in a weeks time the dents which have been left by the previous guy will done and the painter will start work along the denter. So hopping another month, finger crossed. Rest life could not be better these days, what do you say Basharat about that!!!!!

Sarmad any out door activity going on, off roading? if any plan let me know.

[adnanfaraz]

my jeep a week away from me

[sarmadqureshi]

[QUOTE=Basharatu;2220775]The guy who took FJ for Bodywork & PaintJob has halted the project in the middle, Shah Sb. also got busy in the work and I think intensity towards resto is not what is required to complete the project. He was also confused in the color selection, lets see what A

Hi Guys! I am very much around, but as Basharat said stuck with work. The guys who I gave the task tried to take a short cut "Shahid" at teenhati, my suggession to all do not go near this guys. My FJ is back to golimar, hopping that in a weeks time the dents which have been left by the previous guy will done and the painter will start work along the denter. So hopping another month, finger crossed. Rest life could not be better these days, what do you say Basharat about that!!!!!

Sarmad any out door activity going on, off roading? if any plan let me know.

Shah Jee, good to hear from you. Have you changed your nick ?

No offroading recently, but with the rains in, the grounds are all set :D. Will let you know.

[NoWorNeVeR]

Bros,
i am fed up with My MUTTS stock transmission and differential noise . i am running a 3c Turbo engine in it.

Please suggest a good transmission (With 4X4) and ways to eliminate differential noise from it.

(plz reply quick as my MUTT is already in workshop and i need to get is set so that i can proceed to northern areas soon.

looking forward for quick feed back

regards

Plz reply @

https://www.pakwheels.com/forums/4x4-clubs-off-roaders-suv/139575-suggestion-required-mutt-experts#post2241012

[Jboy]

Guys! where can i get my hands on a X 9 Winch as shown in Janj's Mutt?

[choctalpur]

Sarmad, yes these things are available with Tahir. He told me that he sold complete front/back light sets new for 14000, did the person bought from him? It seems that he has got stuff.

I bought my wheel shaft from Lawrence road, as I had to change the u,cross, so with the price of new I got the complete original for the same price. You need to go around for stuff to find it.

Can anyone tell me where exactly in karachi is Lawrence road, and Ghani miils ???

[sarmadqureshi]

Can anyone tell me where exactly in karachi is Lawrence road, and Ghani miils ???

Lawrence road is off M.A Jinnah road behind KMC building and opposite the Fire Bridage HQ. You can check it out on apnakarachi.com.

Ghani Mills, is at Ghani Chowrangi in Site. Take mauripur road and get on the bridge taking you to site (Makro). Get off the bridge and cros Honda Site etc, the 1st traffic light intersection you come to is where you take a left from. Ask anyone and they'll guide you to Ghani Godown.

I think I got that right

[choctalpur]

Lawrence road is off M.A Jinnah road behind KMC building and opposite the Fire Bridage HQ. You can check it out on apnakarachi.com.

Ghani Mills, is at Ghani Chowrangi in Site. Take mauripur road and get on the bridge taking you to site (Makro). Get off the bridge and cros Honda Site etc, the 1st traffic light intersection you come to is where you take a left from. Ask anyone and they'll guide you to Ghani Godown.

I think I got that right

Cheers mate. I hope you do.

[Allee_Qazi]

.

[fahimsohail]

Can anyone tell me where exactly in karachi is Lawrence road, and Ghani miils ???

address of ghani mill is a-46 site karachi, do call me when you visit ghani mill i can get u stuff at lower price because my office is in ghani mill so i know couple of people there who deals in scrap.

[fahimsohail]

Guys! where can i get my hands on a X 9 Winch as shown in Janj's Mutt?

you can get this winch at old goli maar a shop next to raees mechanic.

[adnanfaraz]

latest condition after reforbishment, i will be posting more pics soon inshallah. mohsin bhai i am really gr8ful for your help in critical parts finding. the project has not yet finished.

regards to all


CONDITION BEFORE STARTING THE REFORBISMENT.

AN OTHER VIEW

A VIEW FROM FRONT