MOC - M151 Owners Club, Pakistan

[julyseventysix]

Sarmad, AoA. Hope you keeping well. I dont know if Basharat told you, I have moved to UK. It was so suddon that I did not get a chance to tell u. I had kept stuff for you (Mutt Stuff), but we did not meet. As Basharat mentioned, I could not finish my FJ, but you might see it soon on the road, as my brother has taken over the task and has been painted Gun Silver, wiring is being done now and hopefully should be on the road in Jan.
Keep in touch and I will try to chat to you guys thru this forum, wonderful medium to be in touch.... take care.

Hope all is well at your end sir - take care.

[cyrius]

done experiment with sand blasting and got amazing results soon i will post the pics for u guys to see

[sarmadqureshi]

HNY guys - Hello sam - nice to see few messages from kakakhail as well. so he has gone to US - nice.

Sam - have you sold your rig? I am negotiating a mutt in peshawar, will share the details here very soon.

Oyeeee Hello and where the ---- you ? Its been a longtime, what are you working on these days ? What happened to the FJ project.
I still have mine, not actively selling as yet.

Kaka lala has gone to England to be with the Queen

[sarmadqureshi]

done experiment with sand blasting and got amazing results soon i will post the pics for u guys to see

Good show, what did you experiment it on ?
Do post pics and stay away from the sheet metal body panels when media blasting.

[sarmadqureshi]

Some sunday fun with a MUTT mounted camera.

//youtu.be/http://www.youtube.com/watch?v=SdQPU7BqZgs

[baburawan]

[QUOTE=sarmadqureshi;2577824]Some sunday fun with a MUTT mounted camera.

Which is this Place Sir?
Spcs of your MUTT as well.
Regards:)
Babur Awan

[has_tal]

Some sunday fun with a MUTT mounted camera.

//youtu.be/http://www.youtube.com/watch?v=SdQPU7BqZgs

yummmm.
what thing is @ 0:53??
i hav seen one in my city too but dont kno abt!

[sarmadqureshi]

yummmm.
what thing is @ 0:53??
i hav seen one in my city too but dont kno abt!

The red thing you mean.
That's a Hummbug. Your city being Islamabad or Mirpur ?
Its made by Sardar Javed Ibrahim of Rawalakot fame.

[has_tal]

@sarmad thanks for ur reply sir...
i'm from mirpur.. and there is the same one here but in parot green color just as ur avatar!!

[baburawan]

The red thing you mean.
That's a Hummbug. Your city being Islamabad or Mirpur ?
Its made by Sardar Javed Ibrahim of Rawalakot fame.

Hello friends, any one there who can tell about this kit fabrication, at what is this mounted?

[sarmadqureshi]

@sarmad thanks for ur reply sir...
i'm from mirpur.. and there is the same one here but in parot green color just as ur avatar!!

Yes, that his creation too. He made 3, the green one, red and yellow.

[sarmadqureshi]

Hello friends, any one there who can tell about this kit fabrication, at what is this mounted?

Babar,
What do you want to know about the kit ?

It sits on a VW beatle frame, uses the same gear and can use the same engine, just that this one runs on a '82 corolla's engine.

The mold is made and ready with Javed Sb, the body is fabricated layer by layer, from glass fiber all in one go. As you can see it is a single piece body, apart from the front hood piece.
The body can be shortened and widened depending on the frame one uses to house the kit.

[saidhi]

The red thing you mean.
That's a Hummbug. Your city being Islamabad or Mirpur ?
Its made by Sardar Javed Ibrahim of Rawalakot fame.

Very nice indeed, any idea about the price of the body shell.

Just a loud thinking, would it fit on the frame of Jimny or SJ-410 or 413

[has_tal]

Yes, that his creation too. He made 3, the green one, red and yellow.

wooah then...
i think its up for sale at a local dealer...
will chek that out definitly now!!

[sarmadqureshi]

Very nice indeed, any idea about the price of the body shell.

Just a loud thinking, would it fit on the frame of Jimny or SJ-410 or 413

For this VW about 4 years ago it costed 250k.
Yes it can fit and sit on any frame, already been put on a CJ.
For a Zuki frame it guess it'll have to be shortened length x width wise.

[sarmadqureshi]

but next time around ........
a lot of bystanders to view, what some say 'craziness'

[ulalam]

I can provide spare parts for M151 like dash board gauges, receptacles, front and rear lights, lighting switch (digital & manual), speedometer, rubber parts, seals, gears, shafts, water pumps, wheel cylinders and kits, kit master cylinder and lot more. Please contact me at ulalam60@gmail.com or give me a call at 033 444 34560......

[ulalam]

Prices of some items for M151 Mutt Jeep are as follows:
Front Indicator Light : Rs. 1250 Ea
Rear Stop Light : Rs. 1250 Ea
Light Switch - 3 Legs: Rs. 1000 Ea
Light Switch Digital : Rs. 2500 Ea
Gauges Dash Board : Rs. 1500 Ea (Temperature, Oil, Fuel)
Speedometer : Rs. 2500 Ea
Wheel Cylinder : Rs. 250 Ea
Kit Master Cylinder : Rs. 300 Ea
Cup Master Cylinder : Rs. 15 Ea
Cup Wheel Cylinder : Rs. 15 Ea
Valve Master Cylinder : Rs. 75 Ea

Please ask for prices for other items you need.

Regards

Alam

[sarmadqureshi]

I can provide spare parts for M151 like dash board gauges, receptacles, front and rear lights, lighting switch (digital & manual), speedometer, rubber parts, seals, gears, shafts, water pumps, wheel cylinders and kits, kit master cylinder and lot more. Please contact me at ulalam60@gmail.com or give me a call at 033 444 34560......

Good to know that and thank you for the offers. I hope you still have parts when we need them

[ulalam]

Nice response by MUTT Jeep fans to my offer for M151A2 parts.
I can provide new touch lighting switch (made in USA) in stead of three-leg old shape light switch.... Same adopted from backside as in 3-leg switch.

Yup... cost is Rs.2500 only .... I have only a few pieces left now...
Grab this opportunity and contact now!

ulalam60@gmail.com
Mobile: 033 444 34560