MUTT SUV Project - Stage 1 Complete

[aisheikh]

oh thankx

if u consider this a side pose of a car then it looks some old morris station van

You are the expert with morris. I personally have never come accross one

[aisheikh]

Today I installed a Turbo Boost Gauge for my jeep. I got it from Zamzama Karachi.

Finally now I am able to monitor the boost level on my Jeep. I am getting around 0.85 bar or 12 PSI of boost from the turbo, which is pretty decent. The gauge also shows manifold vacuum. I have also linked up the boost / vacuum line with fuel boost compensator.

I took it for a test run and at 3000 RPM 4th Gear I was touching 100 kph with 12 PSI boost. I ran out of road and gutts to go in the 5th Gear Came across cops on the road, they were so confused looking at my jeep and were wondering what I am doing at 3 AM in the morning, lolz

I am getting boost lag from the wastegate, causing spool lag and boost starting from 2100 RPM. I may have to install a check value in the boost controller / wastegate actuator line to fix boost lag; this should hopefully bring it down to 1600 to 1800 RPM.

[aisheikh]

Need some help.

I have been researching on good body fabricators in Lahore with no luck. Most of the denter / painters I have come accross do stuff manually with crude hammers, but the kind of stuff I need requires fabrication with machines & presses.

Please recommend someone good in Lahore for this Job.

• Rust removal: sand blasting, sheet metal, and galvanization.
• Jeep doors,
• roll bar,
• tail gate,
• and bumpers.

Also please recommend some fiberglass / plastic fabricator for:

• Fenders
• Roof Top
• Interior Trims / Parts

[aisheikh]

//youtu.be/http://www.youtube.com/watch?v=nclEXxzNY-s

[aisheikh]

//youtu.be/http://www.youtube.com/watch?v=nclEXxzNY-s

[cyrius]

very nice video indeed one of its kind on this whole web site wit extream off roading

one only can imagine

[aisheikh]

very nice video indeed one of its kind on this whole web site wit extream off roading

one only can imagine

thanks for the praises.

[cyrius]

to day was a very busy day
i hav done some mods to my stock m151 it was purely based on web research
i have modified the orignal air cleaner with a nissan air filter adjust the carb settings with the help of vicky oil and filter change new tem gauge installed
the performance has increased to 20% jeep seems to be very light and much more power full than before less niose and 5%less fuel cosmuption
the filter and carb mod really helped

[sajidd]

Assalamwalikum, can you tell me a bit more about this dash meter? From which vechile was it taken off? where did you purchase it from? How much? Regards
Sajid

[aisheikh]

Assalamwalikum, can you tell me a bit more about this dash meter? From which vechile was it taken off? where did you purchase it from? How much? Regards
Sajid

Its out of some 4wd Toyota (dont know the model), bought it from bilal ganj for 3000, spent 1500 for modification / conversion of guages from 24v to 12v.

[aisheikh]

//youtu.be/http://www.youtube.com/watch?v=YKOYCW-yT5Q

[cyrius]

started jeep today
but carb is not performing well
i think i will also need carb from you
i try is it works or not any ways talking to sarmad he was telling me suzuki pickup or changan chinies very near to the original ones

[aisheikh]

started jeep today
but carb is not performing well
i think i will also need carb from you
i try is it works or not any ways talking to sarmad he was telling me suzuki pickup or changan chinies very near to the original ones

I guess all the available spares are coming in handy for you.

[aisheikh]

Slowly but surely the mods are coming out right.
Enjoy the pics.

[aisheikh]

Nov 15 Siphon 18.jpg (0 Bytes)

Nov 15 Siphon 19.jpg (0 Bytes)

Nov 15 Siphon 20.jpg (0 Bytes)

Nov 15 Siphon 8.jpg (0 Bytes)

Nov 15 Siphon 11.jpg (0 Bytes)

Nov 15 Siphon 18.jpg (0 Bytes)

Nov 15 Siphon 19.jpg (0 Bytes)

Nov 15 Siphon 20.jpg (0 Bytes)

Nov 15 Siphon 8.jpg (0 Bytes)

Nov 15 Siphon 11.jpg (0 Bytes)

[cyrius]

arslan no progress on the thread though u hav made progress with the mutoyota
the thread is dying put some news upon it and make it rolling and live again

[Irocacuuredub]

женщины постоянно ищут и выбирают себе в мужья сильных и, пожалуй, дажегрубых мужчин, предпочитая им слабых, хотя последние обращаются с нимилучше".Ввиду того что половая чувствительность женщины, будучи слабой,является ничтожным возбудителем ее, становится понятным, почему так влияют Проститутки города сарапул Праститутки люберцы Проститутки новосибирска за 40 Проститутки час 2000 выезд Недорогие праститутки в воронеже Проститутки м авиамоторная Проститутки индивидуалки шлюхи досуг Элитные украинских проституток Молоденькие проститутки фото Дымовая завеса снимали проституток Купить проститутку выезд найти беременную проституткупроститутки и цены негритянкипроститутки питера владаварвара ангарск проституткипроститутки на дом в ярославле

[aisheikh]

LPG / Propane Injection Installed.
EGT Probe and Sensor Installed.

Vehicle Tested for 15' Jump.

[aisheikh]

@cyris

if you note the pictures never show up and stickies dont' allow the post to come up. Hence, not too motivated in updating the thread.

However, the project is on track and the monster is in the making

[baburawan]

What's going to be left of the MUTT ? Wouldn't it be better to put the MUTT shell on a CJ5 & drive around.

Sarmed, I really don't understand, why ppl want to make a Prado, or a Pajero out of MUTT???????