My 1976 model Mazda 808 to a convertible soft top

[ZAZTEK]

Starting with the wiring today.... Removed wiring from the car.... will be installing new wiring after the denting work is completed....

[ZAZTEK]

Bara mushkil panga liya hai, par koi nahi dil bara rakho let's hope maza aaye ga. Bunda seekhta hee issi tarah hai.

Yes, it is indeed a bara panga, Koshish hai to implement something i have in my mind. Hoping to see some good results.

I need your suggestions for its roof/ top.

Regards

[ZAZTEK]

Now is done but it could have been thicker steel....any how lets hope that it works.....

These bended beams are 14 guage, which is a very very strong piece of iron, and i hope once added under the body, will make a quite strong base.

in addition i have also put in quite a strong base / floor, with side horizontal bars under the doors and beside the sides.

Fingers crossed..........

[ZAZTEK]

Started today with the Floor replacement.....

[ZAZTEK]

Planning for the rollover bar.... Any Ideas?????

[ZAZTEK]

Floor has been fitted on left side and started off with the right side........
16 Guage sheet for the base.......

[ovais909]

If only you would have actually planned the project thoroughly and researched a bit more for inspiration and design you would have not only saved alittle money but actually made something worth while! I am sorry but this is a complete disaster, well I guess if it makes you happy......

[ZAZTEK]

Strengthening of Floor and fitment of new plates is continuing...........

[saboor73]

nice project best of luck

[ZAZTEK]

Replacing side shields on the inner side of cabin

[ZAZTEK]

Starting off with the lower structure strengthening........... The beams are made of 14 guage steel and are being embedded in the body throughout its length.

[sial_ali]

no offense brother but sad to see the car ruined

[dr3vil]

No offence but welder is just not the right person for the job

sent from an evil cell phone

[usmani4all]

bro you are the champ... keep the good work up....
but my point of view is you must consider finishing now otherwise they are not going to help you with this....

[ZAZTEK]

bro you are the champ... keep the good work up....
but my point of view is you must consider finishing now otherwise they are not going to help you with this....

Thanks for your encouragement.......It counts as well as helps.....

Regards,

[Teeboyuk]

Planning for the rollover bar.... Any Ideas?????

Bra It don't matter what u do from this point. This mazdas gone it's dead put all the support in it u want till it's so heavy it won't move. The out come is the same soon as u fit the running gear it's going to pull it self to bits slowly one weld at a time. Best of luck. Keep safe

[ZAZTEK]

Lower strong bar.....

[ZAZTEK]

Adding new side plates under the front doors....

[marcel.smeding]

When i saw the first photo's i thought, omg.... what are they doing....
Arrived on page 4 i'm starting to enjoy this project. :0)
Not really my thing, but respect for the time and effort your putting in this project..

[Proverbial_Slang]

Good going brother! Keep it up.