My First Detailing Session (Total Time 13 Hours)

[Ehsan4808]

Dude im sure u can help me.

How did u clean the under body?

if u used the de-greaser. was ur car greasy from underneath?

and if it aint greasy. y use the de-greaser?

Bro , It was not greasy, but Used De-Greaser as it works of Dirt and Grim as well. and specially few times you dont even know if your axle boots have cracks and spitting out grease on the inner side of wheels or the suspension etc You might even have any engine seal leaking which is leaking very less oil and the oil does not drip to the ground rather it keeps on sticking to the engine parts... Anyways I had very less degreaser so degreaser was used on 1 side of the car i.e 2 wheels archs, Remaining 2 were cleaned first by Kerosine oil and brush , and then washed with Surf to clean the Kerosine oil ....

[shuja11]

Bro , It was not greasy, but Used De-Greaser as it works of Dirt and Grim as well. and specially few times you dont even know if your axle boots have cracks and spitting out grease on the inner side of wheels or the suspension etc You might even have any engine seal leaking which is leaking very less oil and the oil does not drip to the ground rather it keeps on sticking to the engine parts... Anyways I had very less degreaser so degreaser was used on 1 side of the car i.e 2 wheels archs, Remaining 2 were cleaned first by Kerosine oil and brush , and then washed with Surf to clean the Kerosine oil ....

thanks man. ur a lot of help.

Did the de-greaser leave a greasy surface after being washed? cuz i hate oil or greasy bits on the underside.

[Ehsan4808]

thanks man. ur a lot of help.

Did the de-greaser leave a greasy surface after being washed? cuz i hate oil or greasy bits on the underside.

How would the DE-Greaser leave a greasy surface ? Its job is to De-Grease , Not to leave greasy film.

[Assassin123]

great work man...ur effort make ur car neat and clean and shinny just like the brand new...every Monday i make plan to do the same on Saturday or sunday but never did such thing bcoz weekends r always full for other things and other problem is that i m unaware of proper way of detailing

[Ehsan4808]

Thanks mate.. Yes you are absolutely rite about the other stuff at weekends.
Sir although I am not a professional , but I can guide you.. But you can always as Ahmad Yar and Usman bhai for things like this

[arhum1994]

Great work man. Really loved the method. Always love a cleaned car and hats off to you:)

[hamza_xeg]

great work :thumbup: alaa work done on dat car, loved it (H)

[Ehsan4808]

great work :thumbup: alaa work done on dat car, loved it (H)

Thanks mate......

[auree1255]

I am always surprised to see the amount of time, energy, the knowledge and the willingness to share in all members at PW. Its amazing. Great job all the way Ehsan 4808. Reminds me of yonder days un-smitten by the strife and drudgery of grown-up age! Great work! Some day may be I will also do this, Insha Allah!

[awais.9]

@Ehsan4808

have u tried foam lance bottle with fair line washer?
fairline washer is available at metro for 5.4k but no foam lance bottle,thinking to get both,but not sure if bottle will fit with it

[mashriqain]

Great job!

Where did you get the microfiber cleaning/drying towels?

[Ehsan4808]

Great job!

Where did you get the microfiber cleaning/drying towels?

@mashriqain
Sorry for being away from thread.. Bro i ordered these from U.K. But you can get MFs from Ahmad Yar Bhai.
Pw ID = @ahmad_yar

[ahmad_yar]

Ehsan bhai wo jo app nai aik detailing gun li hai usko photo kahan hai ?

[Ehsan4808]

@ahmad_yar

Gun khareed li hai, Kartoos k paisay nahi hien . Lol.. Abhi to daily mein gun ko hi chamkaa raha houn PLUS used that Kartoos which you gifted, Unfortunately it got wasted and the foam got torn from the edges as it was used on a bike. Bike has sharp things too close to the fuel tank and rear end whcih were making contact with the foam sides while using, Needed a smalled backing plate and 3 OR 4" pads for that job which I did with that 6" kartoos..

[Newton]

@ahmad_yar

Gun khareed li hai, Kartoos k paisay nahi hien . Lol.. Abhi to daily mein gun ko hi chamkaa raha houn PLUS used that Kartoos which you gifted, Unfortunately it got wasted and the foam got torn from the edges as it was used on a bike. Bike has sharp things too close to the fuel tank and rear end whcih were making contact with the foam sides while using, Needed a smalled backing plate and 3 OR 4" pads for that job which I did with that 6" kartoos..

Bro if u r talking about the foam gun plz share pics and tell me which gun fits the fairline and how much u paid for it ? I hav the same washer as urs.

Thanks

Sent from my GT-I9300 using PW Forums mobile app

[awais.9]

Bro if u r talking about the foam gun plz share pics and tell me which gun fits the fairline and how much u paid for it ? I hav the same washer as urs.

Thanks

Sent from my GT-I9300 using PW Forums mobile app

it would b foam lance bottle if u r talking about same thing,my bad luck fairline stock is all finished up

Sent from my GT-I9500 using PW Forums mobile app

[SALMANWASEEM]

it would b foam lance bottle if u r talking about same thing,my bad luck fairline stock is all finished up

Sent from my GT-I9500 using PW Forums mobile app

i am also looking for the foam lance thingy,i bought the fairline pressure washer for 4200 as it was on sale 2 months ago

[Ehsan4808]

Bro if u r talking about the foam gun plz share pics and tell me which gun fits the fairline and how much u paid for it ? I hav the same washer as urs.

Thanks

Sent from my GT-I9300 using PW Forums mobile app

@newton

Nopes bro. I am talking about Dodo Juice Buff Daddy Dual Action Polisher... Bought the Polisher which Ahmad bhai and me are referring.
Foam lance bottle available with KARCHAR pakistan.. Call them and visit them alongwith your Washer Gun, Check by fitting it there and of it fits ! Buy it and let us know as well.. BTW Karchar's foam lance is for 1800/-Rs..

[Newton]

@newton

Nopes bro. I am talking about Dodo Juice Buff Daddy Dual Action Polisher... Bought the Polisher which Ahmad bhai and me are referring.
Foam lance bottle available with KARCHAR pakistan.. Call them and visit them alongwith your Washer Gun, Check by fitting it there and of it fits ! Buy it and let us know as well.. BTW Karchar's foam lance is for 1800/-Rs..

Thanks man lemme search for their office first

Sent from my GT-I9300 using PW Forums mobile app

[wonder_guy]

@ehsan4808
Boy great work. I wonder why both of us always think on the same lines As my modification part is over i am also trying to learn detailing techniques. Already got rotary polisher and bought some stuff from @vague_one. @shazo & @vague_one tought me some techniques but i am unable to spend the amount of time you have spent because of tough job schedule. Washer is up next in my wish list as well.. After viewing your thread i am also planning to share my detailing session.