My Honda City 1.5 PT Modulo

sameerulhaq064 (Sameer UL haq ) 2018-11-14 17:17:43 +0500 #263

I got mine from Aliexpress. The front ones are switchback.

biloo (Bilal) 2018-11-14 18:49:34 +0500 #264

Cool. So they run along with parking normally and indicate while turning as well right?

biloo (Bilal) 2018-11-14 18:50:28 +0500 #265

Yes, they are indeed bright. It costed me 4500 per pair

sameerulhaq064 (Sameer UL haq ) 2018-11-14 21:13:38 +0500 #266

Yes.

biloo (Bilal) 2018-12-04 14:52:20 +0500 #267

Installed new fog LED bulbs

biloo (Bilal) 2018-12-04 14:53:07 +0500 #268

Beautiful cutoff for fogs

roboxx (_______örthopöd) 2018-12-04 19:01:23 +0500 #269

Which foglights these are? OEM?

roboxx (_______örthopöd) 2018-12-04 19:02:08 +0500 #270

I heard that Honda City's foglights aren't much useful. Isn't it so?

biloo (Bilal) 2018-12-05 10:07:45 +0500 #271

These are LED bulbs. Fog lamps have all their light focused on sides to illuminate footpaths. There's no light to light up the road. Since lights are very bright result is a lot better.

roboxx (_______örthopöd) 2018-12-05 21:57:45 +0500 #272

My Honda City's (2018) low beam headlights don't project light exactly in front of the car, rather more light is wasted on the left & right sides and so the less road is visible ahead. High beam light is okie. Should I use spot lights in the bumper?

sameerulhaq064 (Sameer UL haq ) 2018-12-05 22:14:57 +0500 #273

Bhai, seems as if your light bulb isn't oriented correctly. Correct it and then check. Spotlight ka koyi fayeda nahi as they only throw a beam of light in front. It's like installing a high power torch in front of your car.

biloo (Bilal) 2018-12-05 22:25:14 +0500 #274

Honda City low beam is quite poor. This is because of the shape of headlight actually and that is the sole reason I went for projector retrofit

roboxx (_______örthopöd) 2018-12-05 22:37:22 +0500 #275

What is projector retrofit?

biloo (Bilal) 2018-12-05 22:38:30 +0500 #276

Please scroll up and and see the details I have posted.

sameerulhaq064 (Sameer UL haq ) 2018-12-05 23:13:31 +0500 #277

Installing a Bi-Xenon projector in a reflector headlamp.

biloo (Bilal) 2019-01-08 21:03:08 +0500 #278

Replaced reverse and parking bulbs with LED ones

nab.ahm09 (Nabeel Ahmed) 2019-01-09 01:54:10 +0500 #279

Can you please share link for this one

biloo (Bilal) 2019-01-09 10:10:39 +0500 #280

Check post 202. It's already given over there

mani9999 (mani9999) 2019-01-10 10:16:48 +0500 #281

did you calculate the extra load these bulbs might put on the wiring loom of the car? is it okay? i have been experiencing blown fuse (2 times now) on the replaced larger size horn of my city. the wiring loom fuse gets blown even when i connected the horn by relay direct to battery.

biloo (Bilal) 2019-01-10 11:09:34 +0500 #282

Bro, these are LED bulbs and have half the wattage compared with the original incandescent bulbs which come with the car.
So, the load has basically been reduced and not increased.
Please get a good quality branded horn for your car. I have imported Matsushita horns for my car but surprisingly i haven't replaced them yet.