My New HONDA CG 125 Euro 2 Power Machine

[waqas18]

MashaALLAH Congrats...

[qasimjamil]

Thanks buddy...

[shahoo]

Thanks buddy...

what is bmw side lock welded?? plz show its pic thanks

[qasimjamil]

but why 45 ??? why not 60 ?? dont u think 45 is too low ??

Sent from my iPhone using PW Forums

After reading from different Standard Break-in period references at Pakwheels.

https://www.pakwheels.com/forums/bikes-3-wheelers/167416-best-running-procedure-your-bike-guide

Originally Posted by chery1
[I]The main objective should be to stay below or equal to 5.5k RPM. Not saying that this is the best possible way to break in the engine but only telling my experience.

==> First 200 kms @ max speed of 40km/h, 5.5K RPM
==> 200-500 kms @ max speed of 60km/h, 6.5K RPM(oil change)
==> 500-800 kms @ max speed of 90km/h, 7.5K RPM

==> 800-1000 kms @ max possible speed that I could get on an open road keeping in mind the safety. (oil change @ 1000kms, tuning, nuts tightened etc)

All the stages in the run in period, the speed must be kept variating. Do not drive for more than 30-40 minutes without giving a rest to the bike for the first 300 kms.[/I]

[qasimjamil]

what is bmw side lock welded?? plz show its pic thanks

Since CG is the hottest favorite for thieves...

So forget everything and get the BMW Stainless Steel China Lock welded with your handle... Its is the hardest thing to break
I would recommend all the CG Owners to invest 900/- on this security... I will share the pics of this lock soon

[qasimjamil]

what is bmw side lock welded?? plz show its pic thanks

That lock was installed on my last bike...
Its being Welded on the Frame body and easy to lock ... Just push the button and bike is locked. It has also a different key than usual locks.
The only way to unlock this is ... Break it with the very heavy hammer

[vickytulla]

Nice Evil machine ... happy riding!!!

[qasimjamil]

LOLz @ Evil
Yah sure buddy thanks.

[Eur0_2]

Thanks
I have come to know that your bike was stolen. That's really disturbing and sad.
i just installed BMW side lock welded.
one thing for sure, being owner of CG you always have a threat.
May Allah keep everyone under His special Protection

ameen ...
G sir aap na theek sunna .... once upon a time. mary pass b #euro2 tha.

[qasimjamil]

May Allah give you another good machine Soon.
InshAllah. Dont be upset.

[ammarzahid]

ameen ...
G sir aap na theek sunna .... once upon a time. mary pass b #euro2 tha.

Sad for your loss, but inshaAllah you will get a greater thing in place for this.

Sent from my LG-F160K using PW Forums mobile app

[Rapper]

Congrats
MaShaAllah ride safe dude

Sent from my Nexus IV using Tapatalk running Android 5.0 L Preview.

[shahoo]

Since CG is the hottest favorite for thieves...

So forget everything and get the BMW Stainless Steel China Lock welded with your handle... Its is the hardest thing to break
I would recommend all the CG Owners to invest 900/- on this security... I will share the pics of this lock soon

this lock is easily available from spare parts shops or somewhere else???

[Farhansa]

Since CG is the hottest favorite for thieves...

So forget everything and get the BMW Stainless Steel China Lock welded with your handle... Its is the hardest thing to break
I would recommend all the CG Owners to invest 900/- on this security... I will share the pics of this lock soon

Can u post pic?

Sent from my LT29i using PW Forums mobile app

[thetigerzzz]

Congratulations

[rajahasnain92]

After reading from different Standard Break-in period references at Pakwheels.

https://www.pakwheels.com/forums/bikes-3-wheelers/167416-best-running-procedure-your-bike-guide

Originally Posted by chery1
[I]The main objective should be to stay below or equal to 5.5k RPM. Not saying that this is the best possible way to break in the engine but only telling my experience.

==> First 200 kms @ max speed of 40km/h, 5.5K RPM
==> 200-500 kms @ max speed of 60km/h, 6.5K RPM(oil change)
==> 500-800 kms @ max speed of 90km/h, 7.5K RPM

==> 800-1000 kms @ max possible speed that I could get on an open road keeping in mind the safety. (oil change @ 1000kms, tuning, nuts tightened etc)

All the stages in the run in period, the speed must be kept variating. Do not drive for more than 30-40 minutes without giving a rest to the bike for the first 300 kms.[/I]

bro dont know why or my odo meter is faulty my cg on 5.5k rpm showing speed 60 or above on odo

Sent from my iPhone using PW Forums

[qasimjamil]

this lock is easily available from spare parts shops or somewhere else???

I have installed from Lahore Hotel Market in Lahore near Lahore Railway Station. Its easily available there with good price at following
normal lock: 400
average and good lock: 450 to 600
Strong and best lock: 700 to 750

Welding/Installation: 200

Rest of other spareparts shops, no.idea

this lock is easily available from spare parts shops or somewhere else???

[qasimjamil]

bro dont know why or my odo meter is faulty my cg on 5.5k rpm showing speed 60 or above on odo

Sent from my iPhone using PW Forums

Your meter is absolutely fine
here is the RPM of CG approx
Speed 40 RPM 4
Speed 50 RPM 4.8 to 5
Speed 60 RPM 5.5 to 6
Speed 80 RPM 6.5 to 7.5

the above break.in running procedures was probably for gs 150 which has little high rpm with respect to CG
so dont worry your RPM ODO meter is absolutely normal

[surplusstock]

Congratulations and share close up pictures of lock.

[bhatti007]

Congratulations and share close up pictures of lock.

Can u post pic?

Sent from my LT29i using PW Forums mobile app

Lock on my cg