Nissan B12 Sunny/Sentra complete restoration and upgrade

Technical Forums

D.I.Y Projects

Tags: #<Tag:0x007fd13e270850>

mubeen.chohan (Retro Garage.) 2015-05-14 12:53:18 +0500 #21

i will..

peace-maker (peace-maker) 2015-08-27 19:46:55 +0500 #22

Any update?

mubeen.chohan (Retro Garage.) 2016-07-18 07:19:27 +0500 #23

This is the final result, still has some little things left, will post all the details in some days, i wasnt able to dhare because if some work i was bz in..

mubeen.chohan (Retro Garage.) 2016-07-19 10:10:59 +0500 #24

And i did'nt convert it to the facelift version.. restored the original look,

Sent from my Hol-U19 using PW Forums mobile app

mubeen.chohan (Retro Garage.) 2016-07-20 01:20:41 +0500 #25

The process of dent correction...

Sent from my Hol-U19 using PW Forums mobile app

mubeen.chohan (Retro Garage.) 2016-07-20 01:23:41 +0500 #26

I swapped out the complete doors, with trim, and everything to fully powered ones , the doors i bought were in pretty good shape, front bumper was swapped with Nissan Laurel one, and bought some taiwanese stuff as lights and other things, . And i kept all the old stuff with me, you never know when you need supplies,

Sent from my Hol-U19 using PW Forums mobile app

hamza_xeg (Hamza Sherazi) 2016-07-20 07:46:48 +0500 #27

Looks pretty good. Post more photos.

mubeen.chohan (Retro Garage.) 2016-07-20 09:17:36 +0500 #28

Here u go,

Sent from my Hol-U19 using PW Forums mobile app

mubeen.chohan (Retro Garage.) 2016-07-20 13:58:10 +0500 #29

Chek, will upload more,

Sent from my Hol-U19 using PW Forums mobile app

mubeen.chohan (Retro Garage.) 2016-07-20 14:00:00 +0500 #30

Clean doors, luckily i didnt have any serious rust problems on chassis, thanks to timely washes, amd keeping it free of mud,

Sent from my Hol-U19 using PW Forums mobile app

mubeen.chohan (Retro Garage.) 2016-07-20 14:03:37 +0500 #31

All the stuff bought, the doors, lights etc, everything removed was packed in boxes and kept in my room, so tht it doesnt get damaged while its out,

Front bumper from australian market,

Sent from my Hol-U19 using PW Forums mobile app

mubeen.chohan (Retro Garage.) 2016-07-20 14:09:21 +0500 #32

Changed one foot board, it was damaged, we had some rust issues, because the damaped part retained mud and water in it,

I had to change the rear quarter panel, it was deformed bu some denter, so got it prepared from a sheet, and the denter did a pretty good job here,,

Sent from my Hol-U19 using PW Forums mobile app

mubeen.chohan (Retro Garage.) 2016-07-22 04:04:01 +0500 #33

Foot board replaced, the denter's job herse didnt impress me though looks a lil out of angle i thing..

Sent from my Hol-U19 using PW Forums mobile app

mubeen.chohan (Retro Garage.) 2016-07-22 04:06:00 +0500 #34

Puty bieng applied...

I had to go to attock judt like this,
fitted the lights and seats, and there i go, hahaha

And then i had to go to LHR, .. i just couldnt go on public transport, si i test fitted everything like it should be, just before the final paint job...

Sent from my Hol-U19 using PW Forums mobile app

mubeen.chohan (Retro Garage.) 2016-07-22 04:14:07 +0500 #35

Lowered on coils,

Sent from my Hol-U19 using PW Forums mobile app

ahmadd1 (ahmadd1) 2016-07-29 16:37:04 +0500 #36

Salam bro goodluck with your project its coming along nicely Mashallah. I got the same ride with the exact same engine I wanted to ask you from where did you get coilovers for it? I live in pindi cant find none here

mubeen.chohan (Retro Garage.) 2016-07-30 05:15:33 +0500 #37

I bought them from a fellow Pakwheeler, and a friend, well u can do a lil alteration to coilovers of some other car to fit on b12, hope it helps,

Sent from my Hol-U19 using PW Forums mobile app

mubeen.chohan (Retro Garage.) 2016-07-30 05:20:11 +0500 #38

And there is a shop near tht PSO pump in a street, check someplace there, coilovers from some onld toyota would do the job, ...

Sent from my Hol-U19 using PW Forums mobile app

mubeen.chohan (Retro Garage.) 2016-07-31 07:53:35 +0500 #39

Anyone selling a major accident b12?

Sent from my Hol-U19 using PW Forums mobile app

mubeen.chohan (Retro Garage.) 2016-07-31 07:59:37 +0500 #40

Engine bay cleaning process before the paint i cleaned all the Grimm and grease with some kerosine oil,the process is simple,
spray the kerosine in every corner, soften the deposts with brush, clean with a cloth, then again spray woth kerosine, clean with some cloth tht absorbs, and at the end was with water and some detergent, and sand the surface a little before the paint,

Sent from my Hol-U19 using PW Forums mobile app