Original Iridium plugs FS

[jz]

KR16-U11 are the standard copper plugs. I only mentioned them because if standard are KR16 then in iridium plugs, we should go for IK16. But as you mentioned that IK20 are substitutes for them, I will do some research on it and will get back to you. I think the only difference is the heat range. I will surely get back to you.

Thanks,

sure ,i also jus found out KR16-U11 are copper plugs from a toyota forum

[margallar]

jz the other day i saw a set of bosch super four (four tips) they were priced at 1300 rs. do u think they will be original in this cost and will they do well in carby margalla

[jz]

jz the other day i saw a set of bosch super four (four tips) they were priced at 1300 rs. do u think they will be original in this cost and will they do well in carby margalla

yup they shd but i wont recomend them

[margallar]

what is the flaw with them?

[devilz_apprentice]

@jz, some members on PW have recommended Bosch WR78DC 4tip plugs for Alto F10A, what is your verdict about them?

[jz]

what is the flaw with them?

these are copper plugs,life isnt much,wont give u a v good peformance gain,ur spending 1.3k ,spend 300 more n get platinums,trust me there way lot better than these

[margallar]

jz any identification mark or something on the platinums, i might already have em

[devilz_apprentice]

@jz, awaiting ur response on my query?
also, which platinum or iridium plugs will u recommend for Alto f10a?

[jz]

@jz, awaiting ur response on my query?
also, which platinum or iridium plugs will u recommend for Alto f10a?

sorry for the delay,ngk bpr5egp wil be best suitable,these are platinums,iridums arnt avaliable for carby cars in Pakistan

[jz]

jz any identification mark or something on the platinums, i might already have em

they will look like these

[rizi_85]

@jz

Bro do you have IK16 available with you. According to the Toyota Forums and other forums, IK20 are good for long drives and when RPM is most of the times above 3K. I usually shift gears at 3K RPM and the car is mostly driven within city. So in this case what will be the better choice? IK16 or IK20?

IK16 plugs are equivalent to bkr5eix11.

thanks,

[jz]

@jz

Bro do you have IK16 available with you. According to the Toyota Forums and other forums, IK20 are good for long drives and when RPM is most of the times above 3K. I usually shift gears at 3K RPM and the car is mostly driven within city. So in this case what will be the better choice? IK16 or IK20?

IK16 plugs are equivalent to bkr5eix11.

thanks,

ik16 isnt avaliable not ir bkr5eix11,checked em today morning for another fellow pwler ,im using ik20 as well in my corolla,to what i think there alot better thn 16,20 are more heat resistant which is good for summers n high revs
considering the summer temps id suggest 20,if ur from lahore,u can check my car sometime as well

[rizi_85]

@jz

sure bro! I went through your corolla thread and you have maintained it quite well and the DIYs are just awesome :). You are right about summers but will they be as good in winters as well? and one more thing in most of the forums it is mentioned that IK20 are better for modified engines, are they as good for stock engines?

And from where I can get plug wires for Datsun B210. It is 4 cylinder so 4 + 1 wires will be needed. What are good brands of plug wires and location from where I can get them at reasonable price.

Thanks for your help bro!

[jz]

@jz

sure bro! I went through your corolla thread and you have maintained it quite well and the DIYs are just awesome :). You are right about summers but will they be as good in winters as well? and one more thing in most of the forums it is mentioned that IK20 are better for modified engines, are they as good for stock engines?

And from where I can get plug wires for Datsun B210. It is 4 cylinder so 4 + 1 wires will be needed. What are good brands of plug wires and location from where I can get them at reasonable price.

Thanks for your help bro!

thank u for the compliemtns,ive found ik20 to be equally good even for stock engines,the engine is more stable on high revs,no harm using it on stock engnies ,im also using it in my civic 02 n my vitz 03,as for plug wires have u checked at mondgomery road?try gettin r spec 10mm wires,taiwani but real good

[rizi_85]

thank u for the compliemtns,ive found ik20 to be equally good even for stock engines,the engine is more stable on high revs,no harm using it on stock engnies ,im also using it in my civic 02 n my vitz 03,as for plug wires have u checked at mondgomery road?try gettin r spec 10mm wires,taiwani but real good

Can you please suggest any good and reliable shop on Montgomery Road? And what about Ultima sports wire. I think the wires for Cultus Efi (4 cylinder) can fit in Datsun B210.

Thanks,

[jz]

Can you please suggest any good and reliable shop on Montgomery Road? And what about Ultima sports wire. I think the wires for Cultus Efi (4 cylinder) can fit in Datsun B210.

Thanks,

auto2000 ultima shd fit as well,but there short in market to wt i know,tere 8.5mm n more resistance than rspec

[rizi_85]

auto2000 ultima shd fit as well,but there short in market to wt i know,tere 8.5mm n more resistance than rspec

Thanks bro! can you give any idea about the price of plug wires? and how to find that either the wires are original (actually what we are paying for) or not.

Thanks,

[jz]

Thanks bro! can you give any idea about the price of plug wires? and how to find that either the wires are original (actually what we are paying for) or not.

Thanks,

originals shd cost 1.5-1.7k bro n ull know by the finish,u can acutally distinguish between finishe of non brande chinese copy n original ones,its a v clear difference

[margallar]

they will look like these

thnx will see when it goes for tuning

[dr3vil]

good thread mate
well i never saw any compatibility for my car but i recently installed NGK R PFR6B-11 in my mehran and are working gr8 pick is good and im using 8mm wires as well
now i got vk 20 wth me and will be installing them shortly is there any thing i look out for or just go a head